Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Flatbush Homeowners
A missing or rusted-out cap is the most common reason water gets into a Flatbush chimney, and a cracked crown is usually right behind it. When either one fails, rain runs down the flue, soaks the smoke chamber, and starts working on the mortar from the inside. We fix both, and we do it after you’ve seen the evidence. Our technicians have up to 9 years of experience fitting caps and rebuilding crowns on the brick rowhouses and detached homes that make up most of Flatbush, where parapet walls, shared chimney stacks, and tight side yards change how the job gets done.
We inspect before we recommend, so you’ll know whether you need a cap, a crown, or both before any work is booked. In many cases a cap and crown job can be handled same-day once the scope is confirmed. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A chimney cap keeps rain, birds, and squirrels out of the flue; a crown sheds water off the top of the masonry itself.
- Caps and crowns are the cheapest chimney repairs you can make, and the ones that prevent the most expensive damage.
- We fit Famco and Gelco caps, and we can resurface a failing crown with HeatShield instead of tearing it off.
- Every job starts with a documented inspection, and nothing gets recommended that the camera hasn’t shown you.
- Estimates are free and the price you agree to is the price on the written estimate.
What Our Chimney Cap & Crown Service Includes
Cap and crown work sits in the middle of everything we do, between the routine sweep and the structural repairs. It’s one of five service categories we handle, alongside sweeping, chimney repair, fireplace repair, and formal inspection, so one company owns the chimney from firebox to cap. Here’s what each part of the job actually involves.
Cap Installation
A chimney cap is a hood that sits over the flue opening on legs or a mesh base, letting smoke out while keeping rain, snow, and animals from dropping in. You need one if the flue is open to the sky, which is common on older Flatbush buildings where an original cap rusted away and was never replaced. We fit single-flue caps sized to the flue’s actual dimensions, and we seal the base to the flue tile so water can’t run down the outside of the liner.

Cap Replacement
Most caps fail the same way: the galvanized steel rusts through at the seams, or a wind storm lifts one off the flue and drops it into the yard. You need a replacement when the cap is loose, holed, or sitting crooked, because a tilted cap channels water straight into the flue instead of away from it. We remove the old unit, check the flue tile for damage underneath, and install a new cap anchored properly to the crown rather than resting loose on top.

Crown Repair
The crown is the sloped mortar cap at the very top of the chimney that sheds water away from the brick below it. Hairline cracks are normal in an older crown, but once water gets into them and freezes, the crack widens, the crown separates from the flue, and moisture starts soaking into the chimney’s shoulders. We repair crowns by cutting out the failed section, re-forming the slope, and bonding the new material to sound masonry so the crown sheds water the way it was designed to.

Crown Coating
Crown coating is a flexible, rubberized membrane rolled over the whole crown, sealing the small cracks and porous spots that let water in without a full rebuild. It’s the right call when the crown is structurally sound but weathered, or when you want to stop a small leak before it becomes a masonry repair. We prep the surface, apply the coating across the crown and the bond to the flue, and let it cure into a continuous waterproof skin.
Multi-Flue Cap
Many Flatbush rowhouses have a single chimney stack carrying two or more flues side by side, and a single-flue cap won’t cover all of them. A multi-flue cap is one larger hood sized to span the whole stack, with a mesh screen underneath for each opening. We measure the full footprint of the stack and fit a cap that covers every flue at once, which is usually tidier and more weathertight than several separate caps crowded together.
Custom Cap
Not every chimney is a standard shape. Oversized stacks, unusual flue configurations, and chimneys with a decorative surround all need a cap built to fit rather than one forced to work. We take measurements on site, spec a custom cap in copper or a heavier-gauge steel, and fit it so the proportions look right on the building as well as sealing properly. Copperfield materials come into play here, since a custom cap is a long-term install and the metal quality matters.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-grade supply brands, the same materials commercial contractors use, rather than generic hardware-store caps. Famco caps are a common choice for single-flue work, and we know how their bases and mesh screens are meant to sit on the crown so the fit stays tight through freeze and thaw cycles. Gelco cap installations give us manufacturer-spec weatherproofing backed by an established industry supplier, which matters when a homeowner wants a documented, standard-compliant installation rather than a piece of sheet metal screwed to the flue.
For crown work we turn to HeatShield, whose resurfacing system lets us restore a failing crown as a structurally sound layer instead of demolishing and re-pouring the whole thing. That’s often the difference between a repair that costs a few hundred dollars and a full crown rebuild. Whether you have a Famco cap on the stack now or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
You don’t need to climb up and inspect the chimney yourself to spot these. Most show up from the ground or from the fireplace.
- Water in the firebox after rain. Dripping down the flue, damp creosote smells, or a rusted damper are the classic signs of an open or failed cap. Water sitting in the firebox rusts metal parts and softens mortar, and the source is almost always up top.
- A cap that’s missing, tilted, or rusted through. If you can see daylight through the mesh from the street, or the cap is visibly off-center, it’s no longer doing its job. A loose cap can also drop into the flue and block it, which is a real hazard the first time you light a fire.
- Visible cracks or crumbling on the crown. From the ground, look at the top of the brick. Cracked, spalling, or separated crown material lets water into the chimney body, and by the time it shows up as a ceiling stain inside, the damage has been moving for a while.
- Birds, squirrels, or nests in the flue. An open flue is an open door. Nesting material blocks the flue and catches fire easily, and animals coming and going leave debris that makes the next sweep harder.
- White staining on the chimney’s exterior brick. Efflorescence, that chalky white bloom on the brick face, means moisture is moving through the masonry. A failing crown or an unsealed cap let that water in, and sealing it is the way to stop the process.
Our Chimney Cap & Crown Process – Step by Step
- 1
Book the visit and confirm what we’re looking at. We ask a few questions on the phone about the chimney’s age, visible condition, and whether anything unusual has happened inside. That helps us bring the right cap and crown materials on the first trip.
- 2
Inspect the full system, not just the top. We look at the crown, flue tiles, cap, smoke chamber, and firebox, and we use a camera where the view from above isn’t enough. The inspection is a documented, no-obligation standalone service, which means we’ll give you the assessment even if you decide not to do any repair work yet.
- 3
Show you what we found. You get the photo evidence, a plain-language explanation of which issues are urgent and which can wait, and a written estimate. We don’t recommend work the camera hasn’t shown you can see for yourself.
- 4
Install or repair to spec. Caps go down anchored and sealed to manufacturer spec, whether we’re fitting a Famco single-flue cap or a custom copper unit. Crown work gets the correct slope and bonding so water sheds, and crown coating gets full surface prep before the membrane goes on.
- 5
Confirm the fit and leave the job clean. We check the cap is level and secure, check that the crown drains properly, and walk you through what was done. If you want the sweep or an inspection on the same timeline, we can schedule it while we’re already there.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Flatbush?
Chimney cap and crown work is the lowest-cost chimney repair line, and it’s the one that prevents the most expensive damage. Typical ranges in Flatbush run roughly $180 – $350 for a standard single-flue cap installed, $350 – $650 for a multi-flue cap or a larger custom unit, $400 – $900 for crown repair on a traditional masonry crown, and $300 – $700 for a crown coating after surface prep. A full crown rebuild or a project combining a cap replacement with crown work runs $900 – $1,800 or more depending on the chimney’s size and access. These are estimates, and the written estimate sets the final price.
What moves the number: the number of flues on the stack, the cap material (standard steel vs. copper), whether the flue tile needs repair before the cap can be seated, and how high or awkward the chimney is to reach. A crown that’s cracked all the way through costs more to repair than one that just needs coating, and a chimney shared with a neighboring building takes more time to prep. The best way to avoid overpaying is to get the inspection and the written estimate before saying yes to anything, and to ask which problems are urgent and which can wait. That’s what the estimate includes: a documented inspection, the photo evidence, and the price set per job before we book.
Chimney Cap & Crown Near Flatbush – Our Service Area
We cover Flatbush and the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands, Crown Heights, Midwood, and Prospect Heights, plus the wider Brooklyn area. A cap or crown job is scheduled after the inspection confirms the scope, and most of the neighborhoods we cover are a short drive from one another. If you want to know how we handle cap and crown work in a neighboring area, see our chimney cap & crown page.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Flatbush
A chimney cap is the hood over the top of the flue opening, and the crown is the sloped mortar top of the chimney itself. The cap keeps rain, snow, and animals out of the flue, while the crown sheds water off the surrounding masonry. Together they’re the two parts of the chimney that keep water from getting into the system, and failing either one is the most common cause of interior chimney damage in Flatbush. Call (866) 937-7157 for an exact quote; estimates are free.
Most cap installations and crown coatings take a single visit, and crown repair usually finishes within one working day. The variable is the inspection, since we won’t quote a crown job until we’ve seen the top of the chimney and confirmed the flue tile condition underneath. If the cap and crown are straightforward, the appointment covers both at once. Call (866) 937-7157 for an exact quote; estimates are free.
Estimates typically run $180 – $350 for a standard cap installed, $350 – $650 for a multi-flue or custom cap, and $400 – $900 for crown repair, with crown coating generally in the $300 – $700 range. A combined cap and crown project usually lands between $900 and $1,800 depending on the chimney’s size and access. The written estimate sets the final price. Call (866) 937-7157 for an exact quote; estimates are free.
Yes. We install and service Famco and Gelco caps, along with HeatShield crown resurfacing and Copperfield materials for custom work. If you already have a cap on the stack from one of those makers, we can inspect it, tell you whether it’s still doing its job, and replace it to spec if it isn’t. Whether you have Famco or any other make, we can help.
Cap and crown jobs are often same-day once the scope is confirmed during the inspection. We answer the phone 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, your job is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7157 for an exact quote; estimates are free.
The work and materials are covered per the terms of your written estimate, which sets out exactly what’s installed and how it’s backed. The caps we install come from established manufacturers like Famco and Gelco, and HeatShield crown resurfacing carries its own manufacture-backed system. Ask for the terms in writing before the job is booked, and get an inspection first if you’re not sure what you need. Call (866) 937-7157 for an exact quote; estimates are free.
Clear access to the fireplace and the area in front of it, and let us know if there’s anything about the chimney’s condition we should see. Most of the cap and crown work happens on the roof, so nothing inside the house needs moving. If you want the sweep or a full inspection done on the same visit, tell us when you book so we can plan the time. Call (866) 937-7157 for an exact quote; estimates are free.
Schedule Your Chimney Cap & Crown Service in Flatbush Today
If you’ve seen water in the firebox, a missing cap, or cracks in the crown, the fix is usually simpler and less expensive than the damage it prevents. Start with an inspection; nothing gets recommended until the camera and photos show you why. Call (866) 937-7157 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One company for the full chimney system, from firebox to cap.
Written by the team at Chimney Sweep Flatbush.