Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Crown Heights
If the masonry on your Crown Heights chimney is crumbling, the flashing has pulled away from the roof, or a pre-closing inspection flagged an unlined flue, we can help. We connect homeowners and property managers in Crown Heights with independent local chimney professionals who work on brownstones and brick rowhouses every week and know how these old flues behave. Our technicians have up to 9 years of experience, and every job is priced by a written estimate you approve first. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Crown Heights Homeowners Call Chimney Sweep Flatbush for Chimney Repair
Chimney work in Crown Heights isn’t a one-visit trade. A brownstone with two fireplaces and a gas boiler flue has three separate flues to account for, each with its own condition and its own history. That’s the kind of job we’re set up for: the local pros we connect you with inspect before they recommend, so you see the camera footage before anyone quotes a repair.
We’re a full-system chimney company, covering sweeping, cap and crown work, chimney repair, fireplace repair, and formal inspection. That means the same visit that turns up a failed flashing repair can also document the smoke chamber and the damper, and nothing gets recommended that isn’t backed by evidence you can see. Chimney inspection is available as a standalone service, with no obligation to book repair work afterward, so you can hire us for the assessment alone if that’s all you need.
Homeowners around Eastern Parkway and along the side streets off Nostrand call us because the report is honest about what can safely wait. If a mortar joint is hairline and holding, we say so. We work with professional-grade supply brands including DuraFlex, Olympia Chimney, and HeatShield, not hardware-store substitutes, so repairs hold up to the next nor’easter and the one after that.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Crown Heights
The repairs we handle most in Crown Heights are the ones that come with age: masonry that has been wicking water for a century, flashing that failed at the roofline, and crowns that lost their overhang. For the full scope of what we do, see our chimney repair service page. The four below are the ones Crown Heights brownstone owners ask about most.
Mortar Repointing
Repointing is the workhorse repair on Crown Heights rowhouses. The soft lime mortar joints in an 1880s – 1920s brownstone erode from freeze-thaw cycles and driven rain, and once they recede the brick above starts to move. A repointing job rakes out the failed mortar and replaces it with a mix matched to the original, which keeps the masonry flexible instead of trapping moisture. In Crown Heights, repointing the chimney shoulders and the crown is often the first fix that shows up on a repair list.

Spalling Brick Repair
Spalling is brick face peeling away, and it’s common on Crown Heights chimneys that have taken decades of moisture. Water gets into the brick, freezes, and pushes the face off. The fix is to replace the failed units with matching brick and address whatever let water in, because a spalled brick without that second step is a temporary patch. We source replacement brick for brownstone-era chimneys so the repair blends rather than stands out.

Chimney Waterproofing
Waterproofing is the step that slows the whole cycle down. A breathable masonry sealer keeps bulk water out while letting the wall dry from the inside, which matters in a humid continental climate with cold winters and hot summers. On Crown Heights chimneys, waterproofing goes hand in hand with a crown repair and a working cap, since a waterproofed stack with a torn-off crown still lets water straight down the flue.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s where a lot of Crown Heights leaks start. Nor’easter wind and rain work the flashing loose over time, and once the seal fails, water tracks down to the smoke chamber and damper before anyone notices. We repair or replace the flashing and check the step and counter-flashing so the junction is weathertight, not just caulked over.
Trusted Brands We Service in Crown Heights
The materials matter as much as the labor. We fit DuraFlex flexible liner systems for retrofits and repairs, which is how we handle older or non-standard Crown Heights chimneys where a rigid liner physically won’t go. HeatShield resurfacing lets us restore a sound clay flue instead of tearing it out, and Olympia Chimney and Famco supply caps and components built to manufacturer spec. We don’t claim to stock parts on a truck; what we do is specify the right professional-grade materials for the job and get them in place. That’s how a repair holds up for the long haul rather than a season.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Crown Heights Homes
- Unlined flues in 1880 – 1920 brownstones. Many original interior flues were built as bare brick with soft mortar that wicks water and crumbles over a century. A repair that stops at the firebox leaves a compromised flue above it, so the whole stack has to be looked at, not just the part you can see.
- Caps and crowns torn loose by nor’easter wind. Powerful storms, like the March 2010 system that felled hundreds of Brooklyn trees, damage chimney caps and let rain in year-round. Water tracking down to the smoke chamber and damper is often the first sign, and it shows up long after the storm.
- Gas conversions and inserts that skipped a liner. When a fireplace was converted to gas logs or fitted with an insert without a proper liner, or the damper was left in place, draft and creosote problems follow. The next owner usually inherits them at inspection.
- Failed flashing at the roofline of rowhouse chimneys. Tight lots and shared walls mean Crown Heights chimneys sit close to the neighbor’s roof, and flashing failures there are easy to miss until the ceiling stains.
In Crown Heights, chimney repair demand runs on a different clock than most neighborhoods. The brownstone belt is full of buyers whose pre-closing inspection flags an unlined or crumbling flue, and the neighborhood’s Orthodox households need chimneys cleaned before Passover for kashering ovens. That pushes masonry repairs into a spring crunch instead of the autumn heating-season rush you’d expect elsewhere. It’s also why timing matters: book the inspection early and you get a proper camera look before the April scramble, not a rushed check. A house with two fireplaces and a boiler flue deserves a full Level 2 inspection, and that’s the standard we hold to.
Pricing for Chimney Repair in Crown Heights, NY
Chimney repair on a Crown Heights brownstone is priced per job, and the written estimate sets the final price. As a guide, a typical mortar repointing of a chimney’s upper section runs $600 – $1,800 in this market, spalling brick replacement runs $400 – $1,500 depending on how many courses are affected, chimney waterproofing runs $250 – $650, and flashing repair runs $350 – $900. A partial rebuild of the top of the stack can run $1,500 – $4,000, and whether you need a liner is a separate question the inspection answers. The variables are real: height, access, how much of the stack is failing, and whether a liner is involved. None of it is quoted without evidence you can see, and the estimate is free.
We Also Serve Cities Near Crown Heights
We work with local chimney professionals across the neighborhoods that surround Crown Heights, including East Flatbush, Williamsburg, Prospect Heights, and Flatbush. If you’re just outside the Crown Heights line, the same inspection-first approach and the same written-estimate pricing apply. Ask us when you call and we’ll tell you whether your block is in range.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Crown Heights
Yes. Each flue is a separate channel with its own condition, and a single fireplace check doesn’t tell you anything about the boiler flue or the second hearth. A Level 2 inspection runs a camera through every flue and documents each one, so you know what you’re working with across the whole house. Call (866) 937-7157 for an exact quote – estimates are free.
Often yes, and it’s one of the most common calls we get in Crown Heights. An unlined clay flue can frequently be resurfaced with HeatShield or fitted with a DuraFlex flexible liner, both of which give you a sound flue without a full tear-out. The first step is a camera inspection to confirm the flue’s condition, then the written estimate tells you the path and the cost. Call (866) 937-7157 to get the inspection scheduled.
Smoke coming into the room after a gas conversion usually points to a chimney that was never set up for the new appliance. Gas log sets often need a liner, and the old damper left in place can block draft. It’s one of the failure modes we see in converted Crown Heights fireplaces, and a camera inspection will show whether the flue is lined, whether it’s sized right, and whether creosote or a collapse is the culprit. Call (866) 937-7157 for an exact quote.
Yes, and “occasionally” is how creosote builds up without anyone noticing. Even a handful of fires a season deposits creosote, and in a humid climate the flue also takes on moisture that degrades the mortar. An annual sweep and inspection is the standard for a wood-burning appliance, and it’s what the buyer’s inspector will look for in Crown Heights. Call (866) 937-7157 to book a sweep.
Repointing replaces failed mortar between sound bricks, while a rebuild takes the chimney down to a sound course and reconstructs it with new masonry. Most Crown Heights rowhouses need repointing and a crown repair rather than a full rebuild, but a stack that has lost brick all the way through the wall can call for a partial rebuild of the top section. The camera inspection and a look at the brick face settle which one applies. Call (866) 937-7157 for an exact quote.
If your Crown Heights chimney needs a closer look, call (866) 937-7157 for a free estimate. We inspect before we recommend, the estimate is written and approved by you, and the local pro we connect you with is licensed and insured as their state requires. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.