Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Flatbush?
A chimney cap installation in Flatbush typically costs $185 to $450, and a crown repair or rebuild usually runs $400 to $1,100. A full crown replacement on a masonry chimney in this part of Brooklyn often lands between $850 and $1,600, with the highest end reserved for large, multi-flue stacks. These are estimated ranges for planning; the written estimate you receive after we look at the chimney sets the final price.
Chimney caps and crowns are the two parts of the system that keep water out of the flue and the masonry, and in a place with Flatbush’s mix of century-old brick rowhouses and mid-century apartment buildings, the condition of a crown varies wildly from one roof to the next. Our technicians have up to 9 years of experience reading that difference. We inspect before we recommend, and every estimate is free.
Key Takeaways
- Cap installation in Flatbush: typically $185 to $450, depending on flue count and material.
- Crown repair: typically $400 to $1,100. Full crown rebuild: $850 to $1,600.
- Stainless steel caps last longest; painted steel is cheapest but rusts faster.
- A cracked crown is the single most common cause of water-damaged masonry on Brooklyn chimneys.
- Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items usually break down for a Flatbush chimney. Treat each figure as a typical estimated range, not a fixed quote. The written estimate sets the final price.
| Line item | Typical estimated range |
|---|---|
| Single-flue cap (galvanized steel) | $185 – $275 |
| Single-flue cap (stainless steel) | $245 – $395 |
| Multi-flue cap (2 to 4 flues) | $375 – $750 |
| Custom cap with spark arrestor screen | $400 – $850 |
| Crown repair (hairline cracks, spot patching) | $400 – $700 |
| Crown rebuild with mortar and bond beam | $850 – $1,200 |
| Full crown replacement, large multi-flue stack | $1,200 – $1,600 |
| Chimney inspection (standalone) | $175 – $375 |
| Repointing the top course before crown work | $300 – $650 |
What drives the number up or down? Material is the biggest lever. A galvanized cap costs less up front but rusts through faster in Brooklyn’s freeze-thaw cycles. A stainless cap costs more but lasts far longer and is what we typically recommend for anything beyond a short-term fix. We fit caps from Famco and Gelco because those manufacturers spec the weatherproofing details correctly, and those installations hold up. Crown cost swings mostly on scope: patching a hairline crack is quick work, while rebuilding a crown that has separated from the flue is a masonry job with scaffolding, mortar curing and multiple trips.
Flue count matters, too. A single-flue rowhouse chimney is a small job. A building with three or four flues sharing one crown needs a larger cap, more flashing detail, and more time. And if the top course of brick is spalling when we open it up, repointing has to happen before the crown goes back on, which adds cost. Finding that out before we start is why we inspect first.
What Affects Chimney Cap & Crown Pricing in Flatbush
- Roof access and height. Flatbush’s rowhouse blocks have steep, tightly packed roofs and narrow side alleys. A chimney you can reach from a rear extension is a quicker job than one that needs a rooftop setup over a busy sidewalk. Access is one of the biggest reasons two chimneys on the same block can price differently.
- Masonry condition under the crown. The crown sits on the top brick course. If that brick has absorbed moisture and started to crack, it has to be addressed before a new crown bonds properly. Flatbush’s wet winters and freeze-thaw swings are hard on aged brick, and the older stucco-over-brick chimneys common in the neighborhood often hide a softer course underneath.
- Cap material and screen type. Galvanized, stainless, aluminum and custom-sizes all price differently. Screens, spark arrestors and animal-guard mesh add to the cost but also do real work, especially on chimneys with rain coming straight down the flue from a leaky existing cap.
- Flue count and configuration. Single flue vs. multi-flue changes the size and complexity of both the cap and the crown. Non-standard flue configurations may need a custom cap or a DuraFlex flexible liner check before the cap goes on.
- Deferred damage. If a cracked crown has been letting water in for years, you may be paying to repair the masonry below it as well. Water damage compounds. A crown that looks like a small fix on the roof can mean larger work once we’re up there.
- Whether the job is cap-only or cap-and-crown. It’s common to call us for a cap and find a cracked crown underneath. We show you what we find and price both pieces so you can decide. Inspections are offered as a standalone service, with no obligation to book repairs.
How to Save on Chimney Cap & Crown
The biggest cost saver in Flatbush chimney work isn’t negotiating the price. It’s catching the crown crack before the water gets into the brick. A $400 patch now can prevent a $1,600 rebuild later, and that’s the plain trade math. Here’s where to focus.
- Get on an inspection cadence. A standalone chimney inspection costs less than almost any repair. It documents the cap, crown, liner and firebox in writing, so you know exactly what shape the system is in and can plan rather than react. We treat inspection as a diagnostic, not a sales visit.
- Choose cap material with lifespan in mind. The cheapest galvanized cap isn’t the bargain it looks like if you’re replacing it in a few years. Stainless steel costs more up front and lasts longer.
- Bundle crown and cap work when they’re both due. If both components need attention, booking them in a single visit saves labor and access time compared with two separate trips.
- Address repointing at the same time. If the top course is failing, fix it while the crown is already off. Doing it separately later means paying for access twice.
- Ask about HeatShield resurfacing rather than replacement if the liner is also worn. It’s not the same job as a crown repair, but if you’re already hearing the chimney needs liner work, HeatShield resurfacing is a cost-effective repair path that avoids the expense of a full liner replacement when the original flue is still structurally sound.
- Get a free estimate before agreeing to anything. We put the price in writing so you can compare. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why We Inspect Before We Recommend Crown and Cap Work
Chimney crown work is easy to oversell. A technician who wants to sell you a crown rebuild every visit will find a crack every time. Our approach is the opposite: we inspect, we document, and we show you what we see. If your crown is holding fine and only the cap needs replacing, that’s what the estimate says. If the crown is genuinely failing, we explain the mechanism (water penetration, freeze-thaw damage, mortar separation) so you understand why the repair matters.
This is also why we keep the scope to the full chimney system under one roof. Our chimney sweep Flatbush service, formal inspections, cap and crown work, chimney repair and fireplace repair all run through the same technical vocabulary: flue, firebox, liner, crown, cap, smoke chamber. When the crown work reveals a liner problem, you’re not handed off to another contractor who has to start from scratch. We fit DuraFlex flexible liner systems for retrofits that won’t take a rigid liner, and we use HeatShield resurfacing where it fits. For more on the cap-and-crown piece specifically, see our chimney cap & crown page.
FAQs – Chimney Cap & Crown Cost
How much does chimney cap installation cost in Flatbush?
A single-flue cap typically costs $185 to $450 in Flatbush, and a multi-flue cap runs $375 to $750. Stainless steel sits at the higher end of that range. The written estimate confirms the final price. Call (866) 937-7157 for a free estimate.
How much does a chimney crown rebuild cost in Flatbush?
A crown rebuild typically runs $850 to $1,200 for a standard Flatbush chimney, and up to $1,600 for a large multi-flue stack. Patching minor cracks is less, usually $400 to $700. We inspect before recommending which path fits. Call (866) 937-7157 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney crown?
Patching is cheaper for a crown with hairline cracks only, typically $400 to $700 versus $850 to $1,200 for a rebuild. A crown that has separated from the flue or been letting water in for years usually needs the rebuild. The inspection tells us which one you’re looking at. Call (866) 937-7157 to book it.
Why is a cracked chimney crown a problem in Flatbush?
A cracked crown lets rain and snowmelt run into the masonry, and Flatbush’s freeze-thaw winters use that trapped moisture to split brick from the inside out. A $400 patch can prevent thousands in masonry work later. Call (866) 937-7157 and we’ll take a look before it gets worse.
Can you come today for a cap or crown estimate?
Same-day service is often possible in Flatbush. Call (866) 937-7157. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Chimney Cap & Crown Estimate in Flatbush
A cap and crown are the two parts of the chimney that protect everything below them, and pricing them correctly starts with an inspection. We’ll come out, look at the cap, the crown, the flue and the masonry under it, and give you a written estimate for what actually needs doing. No obligation to bundle additional work, no pressure on a full rebuild if a patch will do. Our technicians have up to 9 years of experience and we work with six professional chimney supply brands, so the cap and crown you get will be the right material, correctly fitted. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Flatbush market as of 2026. Chimney Sweep Flatbush offers free estimates – call (866) 937-7157.
Written by the team at Chimney Sweep Flatbush.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniel Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kevin Nguyen