Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Mill Basin
If your chimney crown is crumbling or your cap has rusted through, we can help. We handle chimney cap & crown work across Mill Basin, from the brick colonials on the interior streets to the newer custom homes along the bay and canals. Mill Basin weather is hard on a chimney top: salty air, wind-driven rain, and freeze-thaw cycles all attack mortar and metal. That’s why we look closely at the whole stack before recommending anything. For an estimate, call (866) 937-7157. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Mill Basin Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown
Mill Basin homeowners and property managers call us because we inspect before we recommend. A cap that looks fine from the yard can hide cracked flue tiles or a crown that’s stopped shedding water. We check the flue, the smoke chamber, the crown, and the flashing, then show you what we found and explain what can wait.
We’re a full-lifecycle chimney company, not a sweep-and-go outfit. That means one company handles the whole system, from firebox to cap, rather than sending you to a separate mason for the crown and a separate sweep for the flue. We fit caps from Famco and Olympia Chimney, sized to the appliance count, and we use HeatShield resurfacing where a liner can be restored instead of replaced. Our technicians have up to 9 years of experience. We serve Mill Basin and the surrounding blocks of Bergen Beach, Marine Park, Flatlands, and East Flatbush.
We don’t manufacture urgency. If your crown has another few seasons in it, we’ll tell you. If a cracked flue tile means the cap is sealing in a problem, that’s worth fixing now. Either way, you decide with the inspection report in front of you.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Mill Basin
Custom Cap
Mill Basin’s oversized custom homes and its older brick houses rarely share a flue configuration, so a stock cap often fits badly or not at all. We measure the flue, the appliance count, and the crown dimensions, then have a cap built to fit. On the peninsula’s larger rebuilds, that often means a cap sized around a factory-built fireplace rather than the original masonry flue.

Crown Repair
A crown that’s cracked or spalling lets water straight into the flue. We cut away the failed mortar, rebuild the crown with the proper slope away from the flue, and tie it in so it sheds water the way it should. On canal-side and bay-front streets, salt spray and damp pit the mortar faster than inland, so crown repair is common here. We confirm the flue liner and smoke chamber are sound before we seal the top with a new cap.

Crown Coating
Not every crown needs a full rebuild. Where the mortar is still sound but the surface has started to erode, a crown coating can seal it and buy years before a rebuild. We’ll tell you plainly which one your crown needs, and we won’t push a rebuild where a coating will hold.

Multi-Flue Cap
A house with two fireplaces and a gas insert needs one cap sized to all of it, not three separate caps fighting for space. We fit stainless multi-flue caps from Olympia Chimney and Famco, built to the appliance count on the stack. On Mill Basin’s mansion rebuilds, a single-flue cap often gets left on a stack that now has a second appliance, and that’s a venting problem worth catching early. Learn more about our Chimney Cap & Crown work and how we size a cap to the whole stack.
Trusted Brands We Service in Mill Basin
We source and install caps from Famco and Olympia Chimney, and we use DuraFlex flexible liner systems where a retrofit needs one. Those materials come from professional chimney suppliers, not the hardware store shelf. We don’t claim to stock parts locally; we order what your stack actually needs and schedule the install once it’s in. If your chimney carries a HeatShield-resurfaced liner, we check it before we cap anything, because a new cap over a failing liner just traps the problem inside.
Common Chimney Cap & Crown Problems We See in Mill Basin Homes
- Cracked clay tile liners under a cap that looks fine. Decades of freeze-thaw and coastal damp open gaps in the original clay tiles on the postwar and 1960s-70s brick houses. From the ground the cap looks intact, but the liner beneath it has lost its seal and the draft with it.
- Crowns eroded to spalling on the water-facing streets. Salt-laden air off Jamaica Bay and nor’easter rain eat at the mortar until the crown stops shedding water. Once it holds water, freeze-thaw finishes the job and the crown cracks open.
- Undersized caps on the mansion rebuilds. Factory-built fireplaces added during the post-1990 rebuilds often got a single-flue cap that ignores the second appliance. Those stacks need a Level 2 inspection of the venting, not just a cap swap.
- Efflorescence and spalling on the brick face. On bay-front and canal-side blocks, techs routinely find chimney exteriors pitted by salt spray and damp, with white salt bloom on the brick. It’s a sign moisture is getting in and the crown and flashing need attention.
Pricing for Chimney Cap & Crown in Mill Basin, NY
Pricing in Mill Basin runs in a typical range for the work. These are estimates, and the written estimate you get after inspection sets the final price.
| Service | Typical Mill Basin range |
|---|---|
| Crown coating (sound mortar, surface erosion) | $450 – $900 |
| Crown repair or rebuild | $900 – $2,200 |
| Single-flue cap, installed | $250 – $600 |
| Multi-flue stainless cap, installed | $600 – $1,400 |
| Custom cap for an oversized or non-standard stack | $900 – $1,800 |
What moves the price: appliance count on the stack, whether the crown needs a rebuild or just a coating, cap size and material, and whether the liner underneath is sound. On a two-fireplace house the cap cost goes up, but so does what a bad cap costs you later. We give you the written estimate before any work begins, and the estimate is free.
See the difference
Before
After
Before
After
Before
AfterHow Mill Basin’s Mix of Old and New Stacks Shapes the Work
Mill Basin is a low-rise, owner-occupied, single-family enclave on Jamaica Bay, and that shapes what a cap and crown job looks like here. The interior streets are lined with postwar through 1970s brick colonials, ranches, and split-levels built on filled marshland, most with original clay-tile flues that have taken decades of freeze-thaw and coastal damp. Along the bay and canals, the post-1990 mansion rebuilds sit beside those untouched older houses, so a single 11234 block can need a custom multi-flue cap for a new factory-built fireplace and a crown rebuild on an original clay-tile stack at the same time. That mix of aging original flues and newer high-end installs in one small zip is what sets the trade here apart from the rowhouse work in neighboring Flatbush or Cansears.
On bay-front and canal-side blocks, salt spray and wind-driven rain pit the mortar of a chimney crown until it cracks and holds water, and the same damp works into the brick face, leaving efflorescence and spalling. A qualified local tech typically cuts away the failed crown, pours or coats a new sloped crown tied into the flue, reseals the flashing, and fits a stainless multi-flue cap sized to the appliance count. That means first confirming the flue liner and smoke chamber are sound, so the new cap isn’t sealing in an already compromised stack. On the interior streets, flues in older homes sometimes sit unused for years and hide cracked tiles or animal nests, so an inspection here has to check both the salty outside and the abandoned inside.
We Also Serve Cities Near Mill Basin
We work throughout Mill Basin and the surrounding neighborhoods. If you’re in Bergen Beach, Marine Park, Flatlands, or East Flatbush, we cover the same cap and crown work there, and the salt-and-damp conditions along the water follow the shoreline into those blocks too. Call and tell us where you are.
Serving Mill Basin, NY – Our Local Coverage Area
We serve Mill Basin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Mill Basin
Yes. A multi-flue cap sized to all three appliances is the right move for a stack like that, and it’s what we fit on most of the peninsula’s rebuilds. One stainless cap from Olympia Chimney or Famco covers every flue and keeps rain and animals out without crowding the stack. We confirm the liner and smoke chamber are sound before fitting it, because a cap over a compromised flue traps the problem. Call (866) 937-7157 for an exact quote; estimates are free.
Salt-laden air off Jamaica Bay and nor’easter wind-driven rain wear at the crown mortar faster on the water-facing streets than inland. Once the crown stops shedding water, freeze-thaw cracks it open, and a patch that ignores the cause will crumble again. The fix is a properly sloped crown that moves water away from the flue, not another skim coat. Call (866) 937-7157 for an exact quote; estimates are free.
Yes. An unused flue is an open chimney, and rain, damp air, and animals get in whether you burn or not. On the interior streets where flues sit unused for years, we routinely find cracked tiles and nests under a missing or failed cap. A cap keeps the flue dry and stops the damage before it starts. Call (866) 937-7157 for an exact quote; estimates are free.
It comes down to whether the mortar underneath is still sound. If the crown surface has eroded but the body holds, a crown coating seals it and buys years. If the mortar is pitted and the crown has cracked through, it needs a rebuild with a proper slope. We inspect first and show you which one your crown needs, and we won’t push a rebuild where a coating will hold. Call (866) 937-7157 for an exact quote; estimates are free.
It should cover the venting, not just the cap. Factory-built fireplaces added during Mill Basin’s post-1990 rebuilds often carry a single-flue cap that ignores a second appliance, and those stacks need a Level 2 inspection of the venting before anything is capped. We check the flue, the smoke chamber, and the cap size against the appliance count, then tell you what’s sound and what isn’t. Call (866) 937-7157 for an exact quote; estimates are free.
Book Your Mill Basin Chimney Cap & Crown Estimate
If your crown is crumbling or your cap has seen better days, call us for a free estimate. We’ll inspect the whole stack, show you what we find, and give you a written price before any work begins. Call (866) 937-7157. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.