Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Flatbush Homeowners
Most chimney problems don’t announce themselves. A cracked flue tile, a thin spot in the liner, or creosote packed into a smoke chamber can sit quietly behind the firebox wall, and the first sign is often a smell, a draft, or a stain on the ceiling above the hearth. A chimney inspection in Flatbush is how you find those problems before they turn into a repair estimate that runs into the thousands. It gives you a documented picture of what’s actually inside the flue instead of a guess.
Our technicians have up to 9 years of experience, and we handle the full chimney system – liner, cap, crown, firebox and flue – so the assessment covers the whole assembly, not just the part you can see from the living room. Flatbush has a large stock of pre-war brick homes and brownstones, and the chimneys in these buildings are often original, with linings that have taken decades of heat cycles and don’t match the appliances now venting into them. An inspection tells you whether the flue still suits the fire you’re running.
We offer chimney inspection as a standalone service, with no obligation to bundle repair work. If a sweep is booked, we can look the same day. Call (866) 937-7157 to set one up. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What Our Chimney Inspection Service Includes
Not every chimney needs the same level of scrutiny. The industry works with three inspection levels, and we match the level to the reason you’re calling. Sometimes a visual check answers the question in twenty minutes. Sometimes you need photos of every flue joint at eye level. Here’s how each one works and when it’s the right call.
Level 1 Inspection
A Level 1 inspection is the basic annual check – a visual assessment of the readily accessible parts of the chimney, from the firebox up through the flue and out to the cap and crown. You need one when you’ve been burning normally, the appliance hasn’t changed, and nothing feels wrong; it’s the check that keeps a working chimney working. We look at the firebox condition, the damper, the smoke chamber, visible flue surfaces, and the exterior crown and cap, then tell you plainly whether the system is sound or whether something needs a closer look.
Level 2 Inspection
A Level 2 inspection goes further: accessible portions of the flue are examined with a camera, and we check the attic, crawl space and any other accessible areas the chimney passes through. You need this level after a chimney fire, after a flue liner change or appliance swap, when you’re buying or selling a home, or when a Level 1 turned up something that needs a closer look. This is the level we recommend whenever a wood stove, insert or new appliance is going into an older Flatbush chimney, because a change in the fuel or appliance changes what the flue needs to handle.
Level 3 Inspection
A Level 3 inspection is a diagnostic-level assessment, done when the other two levels can’t answer the question – a suspected hidden defect, damage after a chimney fire, or a problem inside a concealed chase. It can involve removing parts of the chimney structure or adjacent building materials to reach the area in question. We don’t recommend this level lightly; it’s the last step, used only when the evidence points to a defect that can’t be reached or seen any other way, and we explain exactly what needs opening and why before anything is touched.
Camera Inspection
A camera inspection puts a video scope down the flue so the interior surfaces appear on a screen in real time. You need it when the flue can’t be judged from the firebox, when you smell creosote or smoke in the house, or when a previous sweep reported an issue that was never documented. We record what the camera sees and keep the images with the report, so you’re looking at the same flue lining, joint and offset that we are – not taking it on faith.
Flue Inspection
A flue inspection focuses specifically on the flue: its size, its material, its condition and whether it’s matched to the appliance venting into it. You need one when you’re adding or replacing a wood-burning appliance, when the draft is poor, or when a flue hasn’t been looked at in years. We check for cracked tiles, gaps at the joints, correct lining material and a clear path for smoke, and we note anything that would put the flue outside the tolerances the appliance needs.
Real Estate Inspection
A real estate inspection documents the condition of the chimney for a property transaction, so a buyer or seller knows what they’re dealing with before closing. You need one during a sale when the chimney’s condition isn’t documented, or when a contract or lender expects a professional assessment rather than a verbal opinion. We produce a written report with photo evidence that the buyer, seller and their agents can read on their own, which heads off the back-and-forth a transaction usually gets when the chimney’s condition is only described in conversation.
If you also need the flue swept before or after the assessment, our Chimney Sweep Flatbush service covers that.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We know the equipment that turns up in Flatbush chimneys, and we know how each brand’s components wear. Olympia Chimney liner systems show up in a lot of retrofitted flues, and we know where those assemblies tend to fail at the joints and at the top plate. Famco caps and Gelco cap installations are both familiar territory, so when we inspect a chimney with one of those on top, we’re checking the specific seal and fastening points those caps rely on rather than giving the cap a glance and moving on.
DuraFlex flexible liner systems come up often in older or non-standard flues, and we understand how that kind of liner sits and how to judge its condition from the inside. Copperfield specialty tools and materials are part of how we work in a flue during a sweep or inspection, which keeps the assessment precise and the surfaces clean. Whether you have Olympia Chimney, Famco, Gelco, DuraFlex or any other make, we can help.
Signs You Need Chimney Inspection Right Now
Some symptoms are worth acting on immediately. Others can wait a week or two. Here’s how to tell the difference.
- You’ve had a chimney fire and aren’t sure what it damaged. A chimney fire can crack flue tiles and warp a liner without anyone hearing or seeing it from inside the house. An inspection after a fire is the only way to know the flue is still intact.
- Smoke or a strong creosote smell comes back into the room. This usually means the draft is compromised – a blocked flue, a damaged liner, or a smoke chamber that isn’t doing its job. It won’t clear up on its own, and it gets worse the colder it gets.
- You see staining, crumbling mortar or white residue on the exterior brick. Efflorescence or failing mortar on the chimney’s outside face points to water getting in through the crown or cap. Left alone, that water works down into the flue structure.
- You’re changing the appliance or putting in an insert or wood stove. A new appliance changes what the flue has to handle, and the flue needs to be checked and matched to it before the first burn. This is a Level 2 situation in most homes.
- You’ve never had the chimney looked at, or can’t remember the last time. If the house changed hands or the chimney only gets lit a few times a season, the flue’s condition is unknown. An inspection establishes a baseline you can track from.
Our Chimney Inspection Process – Step by Step
Here’s what actually happens when we show up, so there are no surprises.
- 1
We start with a conversation and a look at the firebox. Before anything goes up the flue, we ask what you burn, how often, and what you’ve noticed. Then we check the firebox, damper and smoke chamber from the hearth side to see what the visible surfaces say.
- 2
We scope the flue with a camera. A video scope goes down the flue and we watch the interior on screen, checking lining condition, joints, and any obstruction – a bird’s nest, a fallen tile, a creosote layer. We record it so you have the images.
- 3
We go to the roof and check the exterior components. The cap, the crown, the flashing and the top of the flue get looked at from outside. Crown cracks and cap damage are common in Flatbush’s older brick chimneys and are often the root of interior water problems.
- 4
We write up what we found and show you the evidence. The report covers every component we checked, notes anything that needs attention, and includes the camera images. Nothing gets recommended without the photo evidence to back it up, so you can see what we saw for yourself.
- 5
We tell you what can wait and what can’t. Not every finding is urgent, and we say so plainly. If a repair can safely be scheduled months out, we tell you that instead of pushing a booking. If something needs attention before the next burn, we explain why and what the options are.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Flatbush?
Most chimney inspections in Flatbush run in the lower hundreds of dollars, depending on the level of inspection and what the technician finds. Here’s what typical scenarios look like:
- Level 1 Inspection: typically $100 – $250 for a straightforward visual assessment.
- Level 2 Inspection: typically $200 – $500 when camera work and an attic or crawl space check are included.
- Level 3 Inspection: typically $500 and up, priced per job once we know what access is needed.
- Camera or flue-only check: typically $150 – $350 when a scope down the flue is the main work.
- Real estate inspection: typically $250 – $450 depending on property size and report requirements.
Several things move the number: how many flues the chimney has, whether the appliance is wood-burning or solid-fuel, whether a camera is needed, and how accessible the roof and attic are. On a pre-war Flatbush brownstone with a shared chimney stack, there can be more than one flue to assess, which takes longer.
The estimate is free, and the written estimate sets the final price – the ranges above are typical, not a quote. Nothing gets recommended without camera evidence, so you’re not paying for work you can’t verify. When we find a problem, we lay out the options, including whether HeatShield resurfacing could fix a damaged liner instead of replacing it outright. Call (866) 937-7157 for an exact quote – estimates are free.
Chimney Inspection Near Flatbush – Our Service Area
We work throughout Flatbush and the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands, Crown Heights, Midwood, Borough Park, Prospect Heights, Park Slope, Brownsville, Marine Park and Mill Basin. A typical visit is booked into the next opening, with dispatch running 7am to 7pm, Sunday through Friday. If you’re in Kensington or East Flatbush, we cover that too – see our chimney inspection page for that area, or the one for chimney inspection in East Flatbush.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Flatbush
A chimney inspection is a professional assessment of the chimney system’s condition – firebox, flue, liner, smoke chamber, cap and crown – using visual checks and, where needed, a camera scope. It tells you whether the chimney is safe to use and whether anything needs repair, and it produces a documented record of what was found. In Flatbush, where older brick chimneys are common, it’s the only reliable way to know whether the lining has held up to the appliance now venting into it.
A Level 1 inspection usually takes 30 to 45 minutes; a Level 2 with camera work takes about an hour to 90 minutes, depending on roof access and whether an attic or crawl space needs checking. A Level 3 takes longer because access has to be opened up. We’ll tell you which level your situation calls for when you book, so you know roughly how long to set aside. Call (866) 937-7157 for an exact quote – estimates are free.
Most inspections in Flatbush run from about $100 for a basic Level 1 up to $450 or more for a real estate report or a Level 2 with camera work. The final price depends on the level, number of flues and access, and the written estimate sets it before any work begins. The estimate is free, so there’s no risk in getting it priced.
Yes. We inspect Olympia Chimney liner systems, Famco and Gelco caps, and DuraFlex flexible liners regularly, and we know how each wears. We don’t install or sell against one brand – we tell you what condition the components are in and what the options are. Call (866) 937-7157 for an exact quote – estimates are free.
Yes, same-day inspections are often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Inspection reports are a record of the system’s condition at the time of the visit, and they don’t carry a warranty on the chimney itself. Any repair or liner work we recommend is priced in a written estimate, and the terms are stated there before you commit. We’ll walk you through what each option includes so you can compare them on more than price.
Clear the hearth area and make sure we can reach the firebox and, if there’s one, the attic access and any crawl space panel. If the fire has been used recently, don’t light it for at least 24 hours before the visit so the flue is cool and clear. It also helps to know what you burn and how often, and whether there’s been a chimney fire or a change in appliance – that information shapes which level of inspection we recommend.
Schedule Your Chimney Inspection Service in Flatbush Today
An inspection gives you a written, photographed record of what’s inside your chimney, with no obligation to book a repair. If you’re in Flatbush or the surrounding neighborhoods, we’ll get you scheduled and show you exactly what we find. Call (866) 937-7157 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.