Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across East Flatbush
If your chimney crown is spalling and your cap is loose, we can help. We work on chimney caps and crowns across East Flatbush, from the two-family rows off Church Avenue to the semi-detached brick houses along Utica and Remsen, and we know what fails first on this housing stock. Our technicians have up to 9 years of experience, and we inspect before we recommend anything. Call (866) 937-7157 and we’ll book a sweep or an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why East Flatbush Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown
East Flatbush has a clear pattern that shows up on almost every roof: original brick chimneys on early-20th-century houses, often with a thin mortar-wash crown that has gone soft and started to crumble. That’s not a guess. It’s what the mix of 1900s – 1940s semi-detached and detached construction produces when a crown sits through forty winters of freeze-thaw cycling. Once that layer fails, meltwater gets into the brick and the clay tile liner underneath, and the problem grows each season.
What sets our approach apart in East Flatbush is that we scope the job per flue, not per house. A single stack here frequently carries more than one appliance, an oil-boiler conversion flue next to a wood fireplace flue, and each one needs its own correct cap and a crown that sheds water properly over both. We inspect first, document what we find, and give you a written estimate you can read before you commit to any repair. Nothing gets recommended without camera evidence.
We connect East Flatbush homeowners with independent local professionals who are licensed and insured as their state requires. We’re familiar with the tight side streets where adjacent chimneys sit a few feet apart, and where a failed crown on one roof can visibly affect the next. That local knowledge shapes how we plan the work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in East Flatbush
Every job starts with a look at the whole stack: crown, cap, flue openings, and the brick below. On East Flatbush’s older homes, that often means cataloguing what’s behind the parging before we touch anything. Here’s what we handle as part of our chimney cap & crown work.
Cap Installation
We fit correctly sized caps so each flue vents independently. On East Flatbush’s shared stacks, an undersized cap on one flue is the usual reason a neighbor’s boiler exhaust drifts back into an adjacent fireplace flue. A properly fitted cap with the right mesh and clearance keeps rain, birds, and downdrafts out while letting exhaust escape cleanly.

Cap Replacement
When a single loose or rusted cap on a multi-flue stack starts letting water and exhaust move between flues, we replace it with a model sized to the actual flue opening. We work with Gelco and Olympia Chimney caps that meet manufacturer specs for weatherproofing. On the flat and low-pitch roof sections common on these blocks, a cap that fits right also matters for how snow and rain run off.

Crown Repair
A cracked or separated crown is the most common structural fault we see in East Flatbush. We rebuild the crown with a proper overhanging slope so water sheds away from the brick instead of soaking down into the clay tile liner. Repairing the crown before the freeze-thaw season protects the masonry underneath, and it’s the cheaper path than waiting for the brick to spall.

Crown Coating
Where the crown is still sound but the surface has gone porous, a coating can seal it without a full rebuild. We use HeatShield resurfacing as a structurally sound, cost-effective alternative to tearing out and replacing a crown that’s mostly intact. It’s a real repair option, not a patch, and it buys years on crowns that would otherwise need rebuilding sooner.
We also handle multi-flue caps and custom caps, which come up often on East Flatbush’s shared stacks. Each flue on the stack gets its own correctly sized cover, and the crown is built to shed water over the whole assembly.
Trusted Brands We Service in East Flatbush
We source and install from six professional chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the same materials commercial contractors use, not hardware-store substitutes. For crown and cap work in East Flatbush, that means Gelco and Famco caps built to manufacturer specs, and HeatShield resurfacing where a rebuild isn’t warranted. For flues that need work behind the cap, we fit DuraFlex flexible liner systems where rigid systems won’t fit the older or non-standard configurations common on these 1910s – 30s brick chimneys. We don’t keep parts in stock, but we can usually source what a job needs quickly. The aim is simple: correct materials fitted once, so the cap and crown hold through a full cycle of Northeast seasons.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in East Flatbush Homes
- Mortar-wash crowns spalling after freeze-thaw: The original thin mortar wash on these 1900s – 1940s houses breaks down through repeated December – March freeze-thaw cycling. Once it cracks, meltwater runs down into the clay tile liner and the interior brick, and the damage gets worse every winter.
- One loose or undersized cap on a shared stack: On East Flatbush’s semi-detached rows, a single stack often serves both an oil-boiler conversion flue and a wood fireplace flue. A poor cap on one lets a neighbor’s boiler exhaust drift back down the other, and you smell it inside.
- Crown edges separating at the flashing line: Where the crown meets the brick, the joint opens up, and heavy summer rain soaks straight into porous 1910s – 30s masonry hidden behind parging. You usually can’t see it from the ground until it shows up as a damp patch or crumbling plaster inside.
- Adjacent chimneys affecting each other: On the dense side-street rows, chimneys sit within a few feet of one another. A failed crown on one roof sends water and draft problems next door, which is why we inspect the whole block context, not just your flue.
Pricing for Chimney Cap & Crown in East Flatbush, NY
Pricing here reflects the housing stock. Most East Flatbush stacks are original brick with multiple flues, so a cap-and-crown job often means scoping two flues rather than one. Here are typical estimated ranges for the East Flatbush market:
- Single-flue cap installation: typically $180 – $400, depending on flue size and cap type
- Multi-flue or custom cap: typically $350 – $750, since shared stacks need each flue sized and fitted separately
- Crown repair or rebuild: typically $400 – $1,200, based on crown size and how much masonry needs redoing
- Crown coating (HeatShield resurfacing): typically $300 – $800 where the crown is sound enough to coat instead of rebuild
What moves the number is the number of flues, the condition of the brick under the crown, and roof access on a tight street. The written estimate sets the final price, and it’s free. If the crown can safely wait a season, we’ll say so. We’d rather tell you to hold off than sell a rebuild you don’t need.
We Also Serve Cities Near East Flatbush
We serve East Flatbush and the surrounding neighborhoods, and we work the same brick stock in East Flatbush as we do across Flatbush, Crown Heights, Brownsville, and Flatlands. If you’re just over the line in one of those areas, the cap-and-crown work is the same, and the inspection-first approach doesn’t change.
Serving East Flatbush, NY – Our Local Coverage Area
We serve East Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in East Flatbush
One cap can cover both flues only if it’s a multi-flue cap sized to the full stack. A single-flue cap on a two-flue stack leaves one opening exposed, and on these shared East Flatbush stacks that’s exactly how a neighbor’s boiler exhaust ends up drifting back into your fireplace flue. We measure the stack and fit a multi-flue or custom cap so each flue vents independently. Call (866) 937-7157 for a free estimate.
It’s usually a cap problem, not a mystery. On East Flatbush’s dense side-street rows, chimneys sit within a few feet of one another, and a loose or undersized cap lets exhaust from an adjacent flue, including a boiler flue, drift back down yours. A correctly fitted cap with proper clearance directs the exhaust up and away. Call (866) 937-7157 and we’ll inspect the stack and tell you what’s happening.
The crown is the concrete or mortar top that sheds water away from the brick and liner below. East Flatbush crowns fail often because most of these houses still have a thin original mortar wash from the 1900s – 1940s, and that layer goes porous and cracks through repeated freeze-thaw cycles each winter. A proper overhanging slope replaces the flat wash so water runs off instead of soaking in. Call (866) 937-7157 for an inspection.
Sometimes, and sometimes not. A crown protects the brick and liner from water year-round, whether or not you burn, so a crack that lets meltwater into the masonry is worth fixing before the next freeze-thaw season. But if the breach is minor and the brick is still sound, the work can safely wait. We’ll tell you which situation you’re in using camera evidence, not a sales pitch. Call (866) 937-7157 for an honest read.
It can, yes. Heavy creosote buildup means the flue needs sweeping before a cap goes on, and the cap has to be sized with enough clearance to let that flue vent properly without restricting draft. On a shared East Flatbush stack with a boiler flue next to a fireplace flue, the cap layout has to account for both. We inspect the flue condition first and scope the cap from there. Call (866) 937-7157 for a free estimate.
If you own or manage a home in East Flatbush and the cap or crown on your stack needs attention, call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect first, show you what we find, and give you a written price before any work starts.
Written by the team at Chimney Sweep Flatbush.