Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
If your cap is missing, rusted through, or your crown has gone porous and cracked, the fix in Kensington is usually a one-visit job: we book a sweep, inspect the full stack with a camera and a close look at the masonry, and set a flat price before any work starts. Chimney cap and crown work in this neighborhood comes down to attached housing and shared masonry, and that shapes every recommendation we make. Our technicians have up to 9 years of experience, they’ve worked the tight roofs and party-wall stacks that define Kensington, NY, and they’ll tell you plainly when a repair can safely wait. Call (866) 937-7157 and we’ll book your sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kensington Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown
The single biggest reason people in Kensington call us for cap and crown work is the shared stack problem. On the 1920s to 1940s brick rowhouses that line so much of this neighborhood, two flues often rise through one masonry pier, and one continuous cap flashing ties them together at the top. When the crown on one side spalls, meltwater tracks down the shared brick and finds its way into the abutting flue. A contractor who only looks at one roof misses half the problem. We inspect both sides, photograph what we find, and lay out what the shared pier actually needs.
Kensington customers tell us the same thing over and over: they want to see the evidence before they agree to spend. That’s why every cap and crown estimate here starts with a camera inspection and a written observation, and why we’ll say out loud when a crown can be coated rather than rebuilt. Our reputation in this neighborhood rests on that inspection-first approach, not on pushing the biggest possible job. We know the difference between the cramped roof access off a side street in Kensington and the slightly easier reach on a semi-attached corner, and we price and plan around it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
Cap Installation
A properly fitted cap keeps rain, birds, and debris out of the flue, and in Kensington it has to seal well at the base where it meets a shared pier. We install stainless and powder-coated caps sized to the actual flue opening, not a generic unit that leaves gaps for water to spall the brick below. For gas appliance venting on a modern retrofit, the cap has to match the vent diameter the appliance actually needs.

Cap Replacement
Most caps we replace in Kensington are original or decades old, and they’ve failed where the mesh meets the frame or where rust has eaten through the base. Replacing a single-flue cap on one side of a shared stack while the neighbor’s flue sits open to the weather is a mistake we see often. When we pull a cap, we look at the flashing line across the whole pier and make sure the adjoining opening gets protection too.

Crown Repair
The crown is the sloped cap of mortar or concrete at the top of the stack, and on Kensington’s pre-war brick rowhouses it’s the first thing freeze-thaw cycles destroy. Spalling mortar and hairline cracks let water soak into the masonry, where it freezes, expands, and pushes the next piece of the crown loose. Repair means rebuilding the slope and sealing the joints so water sheds off the pier instead of tracking down the party wall.

Crown Coating
When a crown is cracked but still structurally sound, a coating can restore its weatherproofing without a full rebuild, and it’s often the sensible choice on a Kensington rowhouse where the masonry underneath is holding. We apply a flexible coating that bridges the small cracks and resists the freeze-thaw movement that caused them. If the crown is crumbling at the edge or the mortar has gone soft through, coating won’t hold, and we’ll tell you that rather than coat a failing crown.
Our chimney cap & crown team handles the whole job from inspection to final seal.
Trusted Brands We Service in Kensington
We source caps and materials from professional-grade suppliers, the same ones commercial contractors rely on. For Kensington cap work that means Famco and Gelco caps built to manufacturer spec, and Olympia Chimney for multi-flue configurations where two openings sit on one stack. Copperfield specialty tools and materials come into the sweep and inspection work, and DuraFlex flexible liner systems are what we reach for when a legacy flue needs a retrofit around a shared or non-standard pier. Those six suppliers keep our turnaround tight because we’re working from proven, correctly sized components rather than hardware-store substitutes.
Common Chimney Cap & Crown Problems We See in Kensington Homes
Kensington’s humid continental climate, with hard freezing winters and wet springs, is brutal on the mortar crowns and single-flue caps on these old brick stacks. Here’s what surfaces again and again:
- Spalled crowns on shared piers. Repeated freeze-thaw cycles crack the original mortar crowns on 1920s to 1940s rowhouses, and the water finds the party wall and the abutting flue. It’s rarely contained to one side.
- One-sided caps on shared stacks. A single-flue cap installed over just one opening leaves the neighbor’s flue wide open to rain and animals, which speeds up clay-tile liner deterioration next door.
- Caps that don’t fit the venting. Many flues in Kensington were sized for coal or oil heat, so a cap meant for that era leaves gaps around a modern gas appliance vent, letting water spall the brick and rust the damper assembly.
- Coal-era clay-tile liners out of step with modern appliances. The original liner’s size no longer matches what’s venting through it, and an oversized or undersized flue collects creosote and condensation it was never built to handle.
See the difference
Before
After
Before
After
Before
AfterHow Attached Rowhouse Chimneys Change the Job in Kensington
In most of the country a chimney is a private affair, sitting on its own roof, failing on its own schedule. Kensington isn’t that. On the fully attached and semi-attached brick rowhouses packed through this neighborhood, a chimney crown or cap failure on one home often directly exposes the abutting neighbor’s flue to water intrusion, because the two stacks frequently share a single masonry pier and continuous cap flashing. That one fact changes everything about how cap and crown work should be handled here. A cracked or spalling crown on one side of a party-wall stack lets meltwater run down the shared masonry and into the neighbor’s flue, especially where the original clay-tile liner is already sized poorly for a modern gas appliance.
So the job on a Kensington rowhouse usually goes like this. A technician documents both sides of the stack, checks the cap and crown for freeze-thaw damage, and photographs the pier and the flashing line. Then the recommendation aims at sealing the shared pier without trapping moisture in the adjacent flue, which is often a custom multi-flue cap or a crown coating rather than a quick one-sided patch. Sometimes the honest answer involves talking to the adjoining owner before work starts, because a repair that protects your flue and ignores theirs just moves the water problem next door and back again. That coordination step barely exists in detached suburban markets. In Kensington’s attached rowhouses it’s part of the job, and skipping it wastes money on both sides of the wall.
Pricing for Chimney Cap & Crown in Kensington, NY
Cap and crown work gets priced per job from a written estimate, and the estimate is free. Typical ranges in Kensington’s market:
| Service | Typical Kensington range |
|---|---|
| Cap installation (single flue) | $265 – $650 |
| Cap replacement | $225 – $550 |
| Multi-flue cap on a shared stack | $450 – $900 |
| Custom cap for a non-standard pier | $550 – $1,200 |
| Crown coating | $250 – $550 |
| Crown repair or rebuild | $400 – $1,100 |
What moves the number is roof access on a tight Kensington street, whether the pier is shared and needs both flues protected, and the material you choose for the cap. The written estimate sets the final price, and we confirm it before any work is booked.
We Also Serve Cities Near Kensington
Kensington sits among neighbors we work in regularly, and the same attached-housing logic applies across much of our Kensington coverage area. We also serve homeowners in Flatbush, Borough Park, Midwood, and Sunset Park, so if your rowhouse shares a wall and a stack with the next house over, you’re in familiar territory for us.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
Yes, it can. In Kensington attached rowhouses the two stacks often share a single masonry pier and continuous cap flashing, so water working into a cracked crown on one side can track down the shared brick and into your flue. That’s why we document both sides of the stack before recommending anything. Call (866) 937-7157 for a free estimate.
Yes, a single multi-flue cap is usually the right answer for a two-flue shared stack, and it protects both openings at once instead of leaving the neighbor’s side exposed. We measure the openings and the pier width and fit a custom multi-flue cap sized to both, sourced from Olympia Chimney. Call (866) 937-7157 to book an inspection and get an exact quote.
It comes down to whether the crown is still structurally sound. Hairline cracks and a porous surface on an otherwise solid crown can be sealed with a flexible coating, while a crown crumbling at the edge or with soft mortar through its depth needs a repair or rebuild. We make that call from a close inspection, not a guess. Call (866) 937-7157 and we’ll show you what we find.
A cap helps indirectly by keeping out rain, animals, and debris, but it won’t fix poor sizing. The real issue in many Kensington homes is a clay-tile liner sized for old coal heating that no longer matches a modern appliance, and that mismatch drives creosote and condensation problems a cap alone can’t solve. A camera inspection tells you what you’re actually dealing with. Call (866) 937-7157 for a free estimate.
Both sides of the shared stack need documenting: the crown and cap condition, the flashing line across the pier, and the abutting flue, ideally with photos the homeowner can see. Because the two homes share masonry, a repair planned for one side affects the other, so the adjoining owner sometimes needs to be brought in before work starts. We photograph the full pier so the recommendation is grounded in evidence. Call (866) 937-7157 to set that inspection up.
If your cap is gone or your crown has cracked, don’t wait for the next freeze to make it worse. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We inspect before we recommend, the local pro we connect you with is licensed and insured as their state requires, and nothing gets suggested that you can’t see in the photos.
Written by the team at Chimney Sweep Flatbush.