Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Marine Park
If you live in Marine Park and your chimney has started showing its age, you’re in the right place. We handle chimney repair across this neighborhood every week, from the detached and semi-detached homes off Gerritsen Avenue to the blocks that back up toward the salt marsh. This isn’t a place where a quick brush-out solves the problem: most of the chimneys here are original to houses built between the 1920s and 1960s, and the salt air off Jamaica Bay works on that masonry year after year. We inspect before we recommend, and we don’t tell you a liner is cracked until you’ve seen the camera footage yourself. Call (866) 937-7157 and we’ll book a sweep or an inspection.
Why Marine Park Homeowners Call Chimney Sweep Flatbush for Chimney Repair
Most of the work we do in Marine Park starts with a homeowner who’s been told by someone else that the whole chimney needs rebuilding. Often it doesn’t. Our technicians have up to 9 years of experience, and that experience is mostly in older Brooklyn housing stock where the flue wasn’t built for what’s venting into it today.
We’re a full-lifecycle chimney company, not a sweep-and-go outfit. That matters when a repair turns out to be structural: the same people who swept your flue can repoint the mortar, reset the crown, and fit a DuraFlex liner if the camera shows it’s genuinely needed. Chimney inspection is available as a standalone service, so you can get a documented assessment before committing to any repair work at all. We answer 24/7 on the phone line, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Marine Park
Mortar Repointing
Marine Park’s freeze-thaw winters are hard on mortar joints. Water gets into the joint, freezes, expands, and pushes the mortar out, and once it’s gone the brick starts taking the damage instead. Repointing means grinding out the failed mortar and packing new material in to the right depth and profile, which is slower work than smearing a skin of mortar over the surface and holds up far better. We hand-scrape deteriorated joints rather than power-washing them, because a hard blast can drive water deeper into old brick.

Spalling Brick Repair
Spalling is the flaking and popping of the brick face itself, and along Marine Park’s coastal edge the salt-laden air accelerates it. A brick that’s spalled loses its weather-resistant outer skin, so the damage spreads to the brick behind it. We replace the failed units and check whether the crown and flashing above are letting in the moisture that started the problem. Fixing the brick without fixing the water source just means doing it again later.

Chimney Waterproofing
Waterproofing is the single most useful thing you can do to a masonry chimney in this neighborhood. A breathable water repellent applied to the brick keeps liquid water out while letting the masonry dry from the inside, which is what stops the freeze-thaw cycle from tearing it apart. We waterproof after repairs are complete, never over a moisture problem that hasn’t been fixed.

Flashing Repair
The flashing is the metal where the chimney meets the roof, and it’s where most leaks in Marine Park homes actually begin. Salt air corrodes the metal, the seals open, and water runs down the outside of the flue into the attic or the ceiling below. We reset or replace the flashing and tie it back into the roof properly. If your leak shows up as a stain on an upstairs ceiling near the chimney, this is usually the reason.
Trusted Brands We Service in Marine Park
We source and install from six professional chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. The reason isn’t brand loyalty, it’s fit. DuraFlex flexible liner systems go in where a rigid liner physically won’t make the turn in an older flue, which covers a lot of the chimneys in Marine Park. HeatShield resurfacing lets us restore a liner that’s sound but pitted instead of replacing it outright. Famco and Gelco caps give a manufacturer-spec installation rather than a hardware-store lid screwed onto the crown. Copperfield specialty tools come out for sweep and inspection work. We order what the job needs per project; there’s no parts warehouse behind this page, just the right material specified for the chimney in front of us.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Marine Park Homes
- Cracked clay tile liners. Original 1950s flues crack after repeated freeze-thaw cycles, and the gaps let heat and creosote reach the masonry behind the tile. You can’t see this from the firebox or the roof; a Level 2 inspection camera is what confirms it.
- Spalling crowns and corroded caps. Nor’easters and salt air loosen and corrode chimney caps and crown edges, and once moisture gets in at the top it travels down through the masonry. This often gets misdiagnosed as a simple cleaning issue when the real problem is the top of the chimney.
- Third-degree creosote glaze. Glazed creosote is baked onto the flue wall and a brush won’t touch it. It needs chemical treatment or liner replacement, and that’s a fire risk you don’t want sitting in the flue over a winter.
- Flashing failures. Old metal flashing around the chimney-to-roof joint corrodes in the coastal air and opens up leaks that show up far from the chimney itself. These get worse every season they’re left.
Pricing for Chimney Repair in Marine Park, NY
Repair pricing here reflects the housing stock: old brick, deep mortar joints, and flues that need hand work rather than a quick pass. A typical mortar repointing in Marine Park runs $400 to $1,200 depending on how much of the chimney is affected and how high the work is. Spalling brick repair usually runs $300 to $900. Chimney waterproofing is typically $250 to $600. Flashing repair runs $250 to $800 depending on whether we’re resetting the existing metal or replacing it. A full chimney rebuild on a badly deteriorated stack runs into the thousands, which is exactly why we don’t recommend one without camera evidence and a written scope. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Marine Park
We work across the surrounding neighborhoods as well: Bergen Beach, Mill Basin, Flatlands, and East Flatbush. The housing stock is similar, and so are the repair needs that come with it, so the same inspection-first approach applies. If you’re just over the neighborhood line, call and we’ll book you in.
Serving Marine Park, NY – Our Local Coverage Area
We serve Marine Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Marine Park
A camera inspection is the only reliable way. A technician runs a camera down the flue and you see the cracked tiles and gaps on screen, level with the mortar joints where the freeze-thaw damage starts. Ask to see the footage before you agree to anything. Our chimney inspections are a standalone service with no obligation to book repair work, so you can get the assessment and decide after.
Salt-laden air off the water corrodes the crown and flashing, which lets moisture into the masonry, and then the freeze-thaw cycle cracks the crown surface. Once the crown is failing it keeps failing unless the moisture path is closed off. A proper fix resets or rebuilds the crown and addresses the flashing at the same time, not just the visible flaking.
Third-degree creosote is glazed, hardened creosote baked onto the flue wall, and a brush just skates over it. It forms from repeated hot fires and restricted airflow, and it’s a genuine fire hazard because it’s fuel sitting in the flue. Removing it takes chemical treatment or liner replacement, and we won’t tell you which until we’ve inspected and seen it.
Usually yes, if the corrosion has eaten through the metal or the cap has pulled loose. A corroded cap lets water into the flue and doesn’t keep out animals or debris the way it should. We fit Famco and Gelco caps to manufacturer spec so the weatherproofing actually holds. It’s a small job compared to what water damage in the flue costs later.
Once a year if you burn wood regularly, and any time you notice a change in how the fireplace drafts or smells. The coastal climate here makes annual checks worth keeping, because salt and moisture do their damage quietly. Call (866) 937-7157 and we’ll book the inspection; the estimate is free if repair work turns out to be needed.
If you’re in Marine Park and something about your chimney doesn’t look right, start with an inspection rather than a repair. We’ll put a camera down the flue, show you what’s there, and tell you plainly when work can safely wait. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.