Chimney Cap & Crown in Flatbush, NY | Chimney Sweep Flatbush

Chimney Cap & Crown in Flatbush - Measured and Fitted, One Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Cap & Crown for Flatbush Homeowners

A missing or rusted-out cap is the most common reason water gets into a Flatbush chimney, and a cracked crown is usually right behind it. When either one fails, rain runs down the flue, soaks the smoke chamber, and starts working on the mortar from the inside. We fix both, and we do it after you’ve seen the evidence. Our technicians have up to 9 years of experience fitting caps and rebuilding crowns on the brick rowhouses and detached homes that make up most of Flatbush, where parapet walls, shared chimney stacks, and tight side yards change how the job gets done.

Call (866) 937-7157

We inspect before we recommend, so you’ll know whether you need a cap, a crown, or both before any work is booked. In many cases a cap and crown job can be handled same-day once the scope is confirmed. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • A chimney cap keeps rain, birds, and squirrels out of the flue; a crown sheds water off the top of the masonry itself.
  • Caps and crowns are the cheapest chimney repairs you can make, and the ones that prevent the most expensive damage.
  • We fit Famco and Gelco caps, and we can resurface a failing crown with HeatShield instead of tearing it off.
  • Every job starts with a documented inspection, and nothing gets recommended that the camera hasn’t shown you.
  • Estimates are free and the price you agree to is the price on the written estimate.

What Our Chimney Cap & Crown Service Includes

Cap and crown work sits in the middle of everything we do, between the routine sweep and the structural repairs. It’s one of five service categories we handle, alongside sweeping, chimney repair, fireplace repair, and formal inspection, so one company owns the chimney from firebox to cap. Here’s what each part of the job actually involves.

Cap Installation

A chimney cap is a hood that sits over the flue opening on legs or a mesh base, letting smoke out while keeping rain, snow, and animals from dropping in. You need one if the flue is open to the sky, which is common on older Flatbush buildings where an original cap rusted away and was never replaced. We fit single-flue caps sized to the flue’s actual dimensions, and we seal the base to the flue tile so water can’t run down the outside of the liner.

Cap Installation

Cap Replacement

Most caps fail the same way: the galvanized steel rusts through at the seams, or a wind storm lifts one off the flue and drops it into the yard. You need a replacement when the cap is loose, holed, or sitting crooked, because a tilted cap channels water straight into the flue instead of away from it. We remove the old unit, check the flue tile for damage underneath, and install a new cap anchored properly to the crown rather than resting loose on top.

Cap Replacement

Crown Repair

The crown is the sloped mortar cap at the very top of the chimney that sheds water away from the brick below it. Hairline cracks are normal in an older crown, but once water gets into them and freezes, the crack widens, the crown separates from the flue, and moisture starts soaking into the chimney’s shoulders. We repair crowns by cutting out the failed section, re-forming the slope, and bonding the new material to sound masonry so the crown sheds water the way it was designed to.

Crown Repair

Crown Coating

Crown coating is a flexible, rubberized membrane rolled over the whole crown, sealing the small cracks and porous spots that let water in without a full rebuild. It’s the right call when the crown is structurally sound but weathered, or when you want to stop a small leak before it becomes a masonry repair. We prep the surface, apply the coating across the crown and the bond to the flue, and let it cure into a continuous waterproof skin.

Multi-Flue Cap

Many Flatbush rowhouses have a single chimney stack carrying two or more flues side by side, and a single-flue cap won’t cover all of them. A multi-flue cap is one larger hood sized to span the whole stack, with a mesh screen underneath for each opening. We measure the full footprint of the stack and fit a cap that covers every flue at once, which is usually tidier and more weathertight than several separate caps crowded together.

Custom Cap

Not every chimney is a standard shape. Oversized stacks, unusual flue configurations, and chimneys with a decorative surround all need a cap built to fit rather than one forced to work. We take measurements on site, spec a custom cap in copper or a heavier-gauge steel, and fit it so the proportions look right on the building as well as sealing properly. Copperfield materials come into play here, since a custom cap is a long-term install and the metal quality matters.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 937-7157

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Brands We Service for Chimney Cap & Crown

We work with professional-grade supply brands, the same materials commercial contractors use, rather than generic hardware-store caps. Famco caps are a common choice for single-flue work, and we know how their bases and mesh screens are meant to sit on the crown so the fit stays tight through freeze and thaw cycles. Gelco cap installations give us manufacturer-spec weatherproofing backed by an established industry supplier, which matters when a homeowner wants a documented, standard-compliant installation rather than a piece of sheet metal screwed to the flue.

For crown work we turn to HeatShield, whose resurfacing system lets us restore a failing crown as a structurally sound layer instead of demolishing and re-pouring the whole thing. That’s often the difference between a repair that costs a few hundred dollars and a full crown rebuild. Whether you have a Famco cap on the stack now or any other make, we can help.

Signs You Need Chimney Cap & Crown Right Now

You don’t need to climb up and inspect the chimney yourself to spot these. Most show up from the ground or from the fireplace.

  • Water in the firebox after rain. Dripping down the flue, damp creosote smells, or a rusted damper are the classic signs of an open or failed cap. Water sitting in the firebox rusts metal parts and softens mortar, and the source is almost always up top.
  • A cap that’s missing, tilted, or rusted through. If you can see daylight through the mesh from the street, or the cap is visibly off-center, it’s no longer doing its job. A loose cap can also drop into the flue and block it, which is a real hazard the first time you light a fire.
  • Visible cracks or crumbling on the crown. From the ground, look at the top of the brick. Cracked, spalling, or separated crown material lets water into the chimney body, and by the time it shows up as a ceiling stain inside, the damage has been moving for a while.
  • Birds, squirrels, or nests in the flue. An open flue is an open door. Nesting material blocks the flue and catches fire easily, and animals coming and going leave debris that makes the next sweep harder.
  • White staining on the chimney’s exterior brick. Efflorescence, that chalky white bloom on the brick face, means moisture is moving through the masonry. A failing crown or an unsealed cap let that water in, and sealing it is the way to stop the process.

Our Chimney Cap & Crown Process – Step by Step

  1. 1
    Book the visit and confirm what we’re looking at. We ask a few questions on the phone about the chimney’s age, visible condition, and whether anything unusual has happened inside. That helps us bring the right cap and crown materials on the first trip.
  2. 2
    Inspect the full system, not just the top. We look at the crown, flue tiles, cap, smoke chamber, and firebox, and we use a camera where the view from above isn’t enough. The inspection is a documented, no-obligation standalone service, which means we’ll give you the assessment even if you decide not to do any repair work yet.
  3. 3
    Show you what we found. You get the photo evidence, a plain-language explanation of which issues are urgent and which can wait, and a written estimate. We don’t recommend work the camera hasn’t shown you can see for yourself.
  4. 4
    Install or repair to spec. Caps go down anchored and sealed to manufacturer spec, whether we’re fitting a Famco single-flue cap or a custom copper unit. Crown work gets the correct slope and bonding so water sheds, and crown coating gets full surface prep before the membrane goes on.
  5. 5
    Confirm the fit and leave the job clean. We check the cap is level and secure, check that the crown drains properly, and walk you through what was done. If you want the sweep or an inspection on the same timeline, we can schedule it while we’re already there.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 937-7157

How Much Does Chimney Cap & Crown Cost in Flatbush?

Chimney cap and crown work is the lowest-cost chimney repair line, and it’s the one that prevents the most expensive damage. Typical ranges in Flatbush run roughly $180 – $350 for a standard single-flue cap installed, $350 – $650 for a multi-flue cap or a larger custom unit, $400 – $900 for crown repair on a traditional masonry crown, and $300 – $700 for a crown coating after surface prep. A full crown rebuild or a project combining a cap replacement with crown work runs $900 – $1,800 or more depending on the chimney’s size and access. These are estimates, and the written estimate sets the final price.

What moves the number: the number of flues on the stack, the cap material (standard steel vs. copper), whether the flue tile needs repair before the cap can be seated, and how high or awkward the chimney is to reach. A crown that’s cracked all the way through costs more to repair than one that just needs coating, and a chimney shared with a neighboring building takes more time to prep. The best way to avoid overpaying is to get the inspection and the written estimate before saying yes to anything, and to ask which problems are urgent and which can wait. That’s what the estimate includes: a documented inspection, the photo evidence, and the price set per job before we book.

Chimney Cap & Crown Near Flatbush – Our Service Area

We cover Flatbush and the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands, Crown Heights, Midwood, and Prospect Heights, plus the wider Brooklyn area. A cap or crown job is scheduled after the inspection confirms the scope, and most of the neighborhoods we cover are a short drive from one another. If you want to know how we handle cap and crown work in a neighboring area, see our chimney cap & crown page.

Serving Flatbush, NY – Our Local Coverage Area

We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Chimney Cap & Crown in Flatbush

Schedule Your Chimney Cap & Crown Service in Flatbush Today

If you’ve seen water in the firebox, a missing cap, or cracks in the crown, the fix is usually simpler and less expensive than the damage it prevents. Start with an inspection; nothing gets recommended until the camera and photos show you why. Call (866) 937-7157 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One company for the full chimney system, from firebox to cap.

Written by the team at Chimney Sweep Flatbush.

Why Flatbush Chooses Chimney Sweep Flatbush

We set the standard for chimney cap & crown in Flatbush.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Flatbush

Getting your chimney cap & crown project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Flatbush Customers Say

Trusted by homeowners across Flatbush and surrounding areas.

★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Mark Gallagher
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Daniel Walsh
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Kevin Nguyen

Ready for Chimney Cap & Crown in Flatbush?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Flatbush.

(866) 937-7157

Request a Free Estimate in Flatbush

Tell us about your chimney cap & crown needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Chimney Sweep FlatbushChimney Sweep KensingtonChimney Sweep East FlatbushChimney Sweep FlatlandsChimney Sweep Crown HeightsChimney Sweep MidwoodChimney Sweep Borough ParkChimney Sweep Prospect HeightsChimney Sweep Park SlopeChimney Sweep BrownsvilleChimney Sweep Marine ParkChimney Sweep Mill BasinChimney Sweep Bergen BeachChimney Sweep Sunset ParkChimney Sweep WilliamsburgChimney Sweep Clinton HillChimney Cap & Crown FlatbushChimney Cap & Crown KensingtonChimney Cap & Crown East FlatbushChimney Cap & Crown FlatlandsChimney Cap & Crown Crown HeightsChimney Cap & Crown MidwoodChimney Cap & Crown Borough ParkChimney Cap & Crown Prospect HeightsChimney Cap & Crown Park SlopeChimney Cap & Crown BrownsvilleChimney Cap & Crown Marine ParkChimney Cap & Crown Mill BasinChimney Cap & Crown Bergen BeachChimney Cap & Crown Sunset ParkChimney Cap & Crown WilliamsburgChimney Cap & Crown Clinton HillChimney Repair FlatbushChimney Repair KensingtonChimney Repair East FlatbushChimney Repair FlatlandsChimney Repair Crown HeightsChimney Repair MidwoodChimney Repair Borough ParkChimney Repair Prospect HeightsChimney Repair Park SlopeChimney Repair BrownsvilleChimney Repair Marine ParkChimney Repair Mill BasinChimney Repair Bergen BeachChimney Repair Sunset ParkChimney Repair WilliamsburgChimney Repair Clinton HillFireplace Repair FlatbushFireplace Repair KensingtonFireplace Repair East FlatbushFireplace Repair FlatlandsFireplace Repair Crown HeightsFireplace Repair MidwoodFireplace Repair Borough ParkFireplace Repair Prospect HeightsFireplace Repair Park SlopeFireplace Repair BrownsvilleFireplace Repair Marine ParkFireplace Repair Mill BasinFireplace Repair Bergen BeachFireplace Repair Sunset ParkFireplace Repair WilliamsburgFireplace Repair Clinton HillChimney Inspection FlatbushChimney Inspection KensingtonChimney Inspection East FlatbushChimney Inspection FlatlandsChimney Inspection Crown HeightsChimney Inspection MidwoodChimney Inspection Borough ParkChimney Inspection Prospect HeightsChimney Inspection Park SlopeChimney Inspection BrownsvilleChimney Inspection Marine ParkChimney Inspection Mill BasinChimney Inspection Bergen BeachChimney Inspection Sunset ParkChimney Inspection WilliamsburgChimney Inspection Clinton Hill
Call Now - We Answer 24/7