Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Flatbush Homeowners
Wood smoke leaves behind creosote, and in a brick house around Flatbush that buildup sits in the flue until someone removes it. A blocked or heavily coated flue restricts draft, and restricted draft pushes smoke and carbon monoxide back into the room instead of up the stack. That’s the problem a real sweep solves, and it’s why we treat every visit as an inspection first. Our technicians have up to 9 years of experience, and we inspect before we recommend: you see the camera footage and the photo report before anyone talks about repairs. Same-day chimney sweep appointments are often available in Flatbush, so call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Sweep Service Includes
One company for the full chimney system means the same team handles the flue, firebox, smoke chamber, cap, and crown. Here’s what each part of the sweep service covers.
Level 1 Inspection
A Level 1 inspection is the basic visual check that comes with a routine sweep. We look at the accessible parts of the chimney, the firebox, the damper, and the flue from the firebox side, and we note anything that looks off. It’s the right call when your fireplace has been burning normally and nothing has changed since the last service. You’ll get a plain description of what we found, not a sales script.

Level 2 Inspection
A Level 2 inspection goes further and includes a camera run through the flue, which lets us see the liner walls, joints, and offsets that a visual check can’t reach. You need one after a chimney fire, after any change to the appliance or fuel type, or when you’ve just bought the house and don’t know its history. Our technicians read the footage with you and flag cracks, gaps, and heavy glazing by location so you know exactly what’s there. If nothing needs fixing, we say so.

Creosote Removal
Creosote is the tar-like residue that condenses on flue walls as smoke cools, and it comes in stages from soft soot to hard, glazed deposits. Soft buildup brushes away; glazed creosote bonds to the masonry and needs more than a brush. We remove what can be removed with professional rotary equipment and tell you honestly when a liner surface has reached the point where resurfacing makes more sense than another cleaning. That’s where HeatShield resurfacing earns its place, since it restores a sound flue at a fraction of full liner replacement.

Soot Removal
Soot is the fine, dry powder left after combustion, and it settles on the smoke shelf, the damper, and the firebox floor. Left alone it stains the room on the next fire and dulls draft over time. We vacuum the firebox and smoke chamber with HEPA equipment and seal the work area with drop cloths, so the soot leaves the house with us rather than settling on your furniture.
Annual Sweep
An annual sweep is the once-a-year cleaning that keeps a wood-burning chimney safe and drafting properly. It’s also the moment to catch small problems, like a hairline crack in the crown or a cap that’s come loose, before they turn into water damage inside the masonry. We schedule the sweep around your burning season so the chimney goes into winter clean and checked.
Fireplace Cleaning
Fireplace cleaning covers the firebox itself: ash removal, soot on the brick face, the glass on a fireplace door, and the grate and andirons. It’s the finish work that makes the hearth usable again after a season of burning. We use Copperfield specialty tools and materials for this stage of the job, the same professional-grade equipment used on commercial work rather than a wire brush from a hardware aisle.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We work with professional-grade chimney supply brands, and that shows up in how we service what’s already in your chimney. DuraFlex flexible liner systems show up in a lot of Flatbush retrofits because older flues are rarely straight or standard, and we know where those liners wear at the top plate and the appliance connection. Olympia Chimney components turn up on caps and liner terminations, and we check their fit and seal as part of every inspection.
Famco and Gelco caps and weatherproofing hardware are common on the rooflines around here, and we know how their mounting and sealing hold up after a few freeze-thaw cycles. Whether you have equipment from these brands or any other make, we can help.
Signs You Need Chimney Sweep Right Now
- Smoke rolling back into the room. A fireplace that used to draw well and now puffs smoke is telling you the flue is restricted by creosote or a nest. That’s a draft problem, and it’s worth a call before the next fire.
- A strong, sharp smell from the hearth. Creosote smells acrid, especially on a damp day, and the odor gets stronger as the deposit thickens. If the smell reaches the rest of the house, the buildup is likely heavy.
- Black, flaky residue at the top of the firebox. That’s glazed creosote forming where the smoke cools. It’s the stage that can’t simply be brushed off and needs to be assessed properly.
- A chimney fire you suspect happened. A loud roar, popping, or a shower of black flakes on the roof can all point to a fire in the flue. Even if it burned itself out, the liner needs a camera inspection before you light another fire.
- It’s been more than a year since the last sweep. Annual cleaning is the baseline for a wood-burning fireplace. If you can’t remember the last time, that’s the sign.
Our Chimney Sweep Process – Step by Step
- 1
We start with a conversation and a look at the setup. Before any tool comes out, we ask how often you burn, what you burn, and whether the fireplace has been acting differently. That tells us which inspection level fits the visit and what to watch for in the flue.
- 2
We protect the room and set up the equipment. Drop cloths go down, and the vacuum connects before we open the firebox so soot and ash have somewhere to go besides the air. The work area is sealed so the rest of the house stays clean.
- 3
We sweep the flue with rotary equipment. Professional brushes and rods run the length of the flue to break up creosote and soot, and we work from the firebox and, where the layout allows, from the roofline. This is where the buildup you couldn’t see comes out as measurable debris.
- 4
We run a camera through the flue. The camera inspection is the part that matters most. We record the liner walls, joints, and any offsets, then walk you through the footage on the spot so you can see cracks or gaps for yourself.
- 5
We write up the findings and give you the photo report. You get a documented assessment with the images and our recommendation, including a clear note when something can safely wait. No work gets added to the job without your yes, and there’s no obligation to book repairs the same day.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Flatbush?
A standard annual sweep in Flatbush typically runs $150 to $300 depending on how much creosote has built up and how accessible the flue is. A Level 1 inspection is usually included with the sweep at no extra charge. A Level 2 inspection with camera work typically runs $250 to $450, and fireplace cleaning as a standalone job sits in the $120 to $250 range. Creosote removal on a heavily glazed flue costs more than a routine brush-out because it takes longer and more equipment, and in that case HeatShield liner resurfacing may be the better path than repeated cleanings.
What affects the price: the condition of the flue, the length and configuration of the chimney, whether the roof is easy or awkward to access, and whether the cap or crown needs attention at the same time. How to avoid overpaying is simple. Ask for the inspection findings before you approve anything, and ask what can wait. That’s why we offer inspection as a standalone service with no obligation to bundle, and why the sweep price is agreed before we book. The written estimate sets the final price, and gathering it costs you nothing.
Chimney Sweep Near Flatbush – Our Service Area
We cover Flatbush and the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands, Crown Heights, Midwood, Borough Park, Prospect Heights, Park Slope, Brownsville, Marine Park, and Mill Basin. Response times depend on the day, and same-day appointments are often available when you call early. For a closer look at the surrounding areas, our chimney sweep page covers Kensington, and our chimney sweep page covers East Flatbush. To book the main chimney sweep service or read about the full Chimney Sweep Flatbush offering, start there.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Flatbush
A chimney sweep is a professional cleaning of the flue and firebox to remove soot and creosote, followed by an inspection of the system’s condition. It’s not just brushing; it’s the check that tells you whether the liner, cap, and crown are doing their job. At Chimney Sweep Flatbush, the sweep and a documented inspection go together, with camera footage you can review. Call (866) 937-7157 for a free estimate.
A routine sweep usually takes about an hour, and a Level 2 inspection with camera work runs longer, closer to an hour and a half to two hours. Access to the roof and the amount of creosote both change the timing. We’ll give you a realistic window when we book rather than a number designed to get you off the phone. Call (866) 937-7157 to schedule.
A typical sweep in Flatbush runs $150 to $300, with Level 2 inspections at $250 to $450 and standalone fireplace cleaning at $120 to $250. On a heavily glazed flue, creosote removal adds cost, and resurfacing with HeatShield may be the more sensible option. The written estimate sets the final price, and the estimate itself is free. Call (866) 937-7157 for an exact quote.
Yes, we service Olympia Chimney components and DuraFlex flexible liner systems, along with Famco and Gelco hardware and other makes. We know where DuraFlex liners wear at the top plate and appliance connection, and we check those points on every inspection. Whatever is on your chimney, we can assess it. Call (866) 937-7157 to book.
Same-day appointments are often available in Flatbush when you call early in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7157 to get on the schedule.
Workmanship on our sweeps and installs is backed by our satisfaction guarantee, and manufacturer coverage on materials like DuraFlex liners and Famco caps follows the supplier’s terms. We’ll tell you exactly what applies to your job in writing before any work starts. Ask us when we’re on site and we’ll put it in the estimate. Call (866) 937-7157 with questions.
Clear the hearth of decorations, andirons you want moved, and anything fragile within a few feet of the firebox. Don’t burn for at least 24 hours before the appointment so the flue and ash are cool. Make sure we can reach the fireplace and, if needed, the roof access, and secure pets in another room. Call (866) 937-7157 to confirm your appointment.
Schedule Your Chimney Sweep Service in Flatbush Today
One company for the full chimney system, from firebox to cap, and an inspection you can see for yourself before you spend a dollar on repairs. Call (866) 937-7157 for a free, no-obligation estimate on your Flatbush chimney sweep. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.