Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kensington, NY
We provide independent Gelco service across Kensington, NY. What makes our Gelco work here different is the housing itself: attached rowhouses with shared chimney stacks, where a failed cap on one side of a party wall can send water into the neighbor’s flue. We’re an independent shop, not affiliated with Gelco, so our knowledge comes from hands-on repair and service of Gelco caps, dampers and crown coatings throughout Kensington. Our technicians have up to 9 years of experience, and every job starts with an inspection before we recommend anything. Call (866) 937-7157 for a free estimate.
Why Kensington Residents Choose Us for Gelco Service
Most of the Gelco work we do in Kensington is on caps and dampers that have been sitting on a chimney for years without anyone looking at them. We know how these components age in Brooklyn’s freeze-thaw winters and humid summers, and we know what a properly sealed cap should look like on a pre-war stack.
When we service a Gelco cap, we use quality parts that fit the unit, whether that’s an OEM component or a well-made aftermarket equivalent for a standard cap or damper. We’re upfront that we’re an independent provider, not an authorized Gelco dealer, and that independence is deliberate: we can recommend the right fix rather than the most expensive one.
Scheduling is straightforward. Book a sweep or an inspection, we confirm a window, and you get a clear written estimate before any work begins. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kensington
The same handful of Gelco failures show up again and again on Kensington’s older rowhouses. Here’s what we actually find.
- Cracked or warped multi-flue caps after freeze-thaw cycles. Kensington’s brick chimneys go through repeated freezing and thawing each winter, and a Gelco multi-flue cap can crack along a seam or warp enough to let water straight into the flue below. On an attached home, that water doesn’t always stay on your side of the party wall.
- Rusted or seized top-mount dampers. Humid summers plus a fireplace that sits unused for months are a bad combination for a Gelco top-mount damper. The mechanism rusts shut, and venting stops working the way it should. We free up, repair or replace the damper depending on what the inspection shows.
- Failed adhesive or fasteners loosening the cap. After enough winters, the fasteners holding a Gelco cap can work loose, and the cap starts to shift. Left alone, it detaches. We reseal and re-secure where the cap is still sound.
- Corrosion on stainless steel caps. NYC humidity and winter road salt exposure take a toll on Gelco stainless steel caps over time. Surface corrosion is common; structural thinning is what matters. We document what we find and tell you plainly whether the cap can be cleaned up or needs replacing.
- Water intrusion through a degraded crown. A failed Gelco chimney crown coating lets water into the masonry above the flues, and in Kensington’s attached housing that moisture can migrate into the abutting neighbor’s masonry. Crown coating with HeatShield materials is often the right fix before the brick spalls.
Gelco Service in Kensington: What Local Conditions Mean for Your Equipment
Kensington’s rowhouses are mostly early-20th-century brick, semi-attached or fully attached, and a chimney here is rarely truly individual. A cracked flue tile or a failed Gelco cap on one home’s stack can leak into or affect the abutting neighbor’s side through shared masonry. That changes how we work. On a shared stack, we document the cap and adjacent masonry condition so both property owners can see it, and we coordinate with the adjoining owner before recommending a cap or crown repair. It’s not a sales tactic; it’s the only way to make a fix that actually holds. The freezing winters and wet springs here also punish any gap in the cap or crown, so a loose Gelco cap that would be a minor annoyance on a detached suburban house is a real water problem on a block of attached homes. If you’re wondering how that plays out on your street, that’s exactly what the inspection is for.
Gelco Models & Products We Service in Kensington
We work on the Gelco products most Kensington homeowners actually have on their chimneys.
That covers Gelco Multi-Flue Caps, the kind that top a stack serving more than one flue; Gelco Custom Stainless Steel Caps built to fit a specific chimney footprint; Gelco Top-Mount Dampers that seal the flue when the fireplace is idle; and Gelco Chimney Crown Coatings that protect the masonry at the top of the stack. When a component needs replacing, we prefer to repair over replace unless the unit is structurally compromised, and we use OEM Gelco parts when they’re available so the fit is direct. For standard caps and dampers, a high-quality aftermarket equivalent is a sound alternative. We’re an independent service provider, not affiliated with Gelco.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kensington
Pricing depends on what we find and what it takes to correct it: whether the cap needs resealing or full replacement, whether a top-mount damper can be freed up or has to come out, and how much masonry repair the crown needs. We don’t quote over the phone without looking. A typical sweep is a flat-price service, and the written estimate sets the final price for anything beyond it. The estimate is free.
| Service | Typical Estimated Range |
|---|---|
| Chimney sweep (flat-price, agreed before booking) | Quoted per job |
| Gelco cap reseal or re-secure | Quoted per job |
| Gelco Multi-Flue Cap replacement | Quoted per job |
| Gelco Top-Mount Damper repair or replacement | Quoted per job |
| Gelco Chungel Crown Coating | Quoted per job |
| Camera inspection with photo report | Included |
If work can safely wait until spring, we tell you that. Call (866) 937-7157 for an exact quote. Estimates are free.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kensington
My neighbor and I share a chimney in our attached Kensington rowhouse. If my Gelco cap is damaged, does it affect them? Yes, it can. Shared masonry means water from a failed cap on your side can seep into your neighbor’s flue, so we document the cap and adjoining masonry condition for both owners and coordinate before any cap or crown repair. Call (866) 937-7157 to book an inspection.
How often should I have my Gelco multi-flue cap inspected in Kensington’s climate? Once a year is the practical answer, and it’s best done before the heating season. Freezing winters and wet springs work on cap seals and fasteners year-round, and annual inspection catches a loose cap before it becomes a water problem. Call (866) 937-7157 to schedule.
Can I replace just one flue’s cap on a Gelco multi-flue unit, or do I need a whole new cap? Often you can replace just the damaged section or cap, but it depends on how the multi-flue unit is constructed and whether the frame is sound. We inspect first and tell you which option actually holds, rather than defaulting to a full replacement. Call (866) 937-7157 for an assessment.
What are signs that my Gelco top-mount damper is failing in my Kensington home? A damper that won’t open or close smoothly, feels stuck, or leaves a draft when closed is usually failing. Humid summers and long idle periods are the common cause here. We free up or replace the damper based on what we find. Call (866) 937-7157 to book.
Is it true that Gelco caps are prone to rust in NYC’s climate? Surface corrosion is common on stainless steel caps in NYC humidity and with winter road salt exposure, but whether it matters depends on structural thinning. We inspect and document before recommending anything. Call (866) 937-7157 for a free estimate.
Service Areas Near Kensington
We also service Gelco caps, dampers and crown coatings in Gelco work throughout nearby Flatbush, Borough Park, East Flatbush, Flatlands, Crown Heights and Midwood. If you’re not sure whether your block falls in our service area, give us a call and we’ll confirm.
Book Your Gelco Service in Kensington Today
Whether it’s a loose Gelco multi-flue cap, a stuck top-mount damper, or a crown coating that’s seen better days, we inspect first and recommend only what the evidence supports. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Flatbush.