Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Flatbush Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning, inspection and repair service in Flatbush, NY, for owners of Gelco direct-vent inserts, B-vent gas fireplaces, wood-burning inserts and universal or multi-flue caps. What sets our Gelco work apart is hands-on familiarity with the venting, damper and firebox quirks that show up on this equipment after years of use, backed by a documented inspection before anyone recommends a repair. Chimney Sweep Flatbush is an independent service provider, not affiliated with or authorized by Gelco. Call (866) 937-7157 for a free estimate.
Why Trust Chimney Sweep Flatbush for Your Gelco Chimney Cleaning?
Our technicians have up to 9 years of experience, and a good share of that time has been spent on Gelco gas and wood-burning units. That matters because Gelco inserts don’t fail the way a plain open fireplace fails. A direct-vent insert with a clogged termination behaves like an appliance with a breathing problem, not like a dirty chimney, and diagnosing it correctly takes someone who has pulled these units and traced the vent run before.
We use quality parts that fit Gelco equipment. On older insert lines, OEM components can be scarce or slow to arrive, so we source aftermarket gaskets, dampers, refractory panels and caps matched to the unit’s specifications. We do not claim to stock genuine Gelco parts or to be a dealer. What we can say plainly is that we fit parts that work with the equipment in front of us, and we tell you when a part is the wrong match for your unit.
Our service is warranty-safe. We follow the manufacturer’s venting and clearance requirements for the specific unit, which is the thing a warranty claim actually turns on. We document what we find with photos so you have a record of the system’s condition and the work performed. Every sentence here is about the equipment, not about a sales pitch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Flatbush
Flatbush’s chimney work is shaped by its housing stock. Most homes here are two- to three-story brick rowhouses and Victorian-era houses built between 1890 and 1930, with exterior stacks on party walls, original clay tile flues, and basements converted into separate units with their own boilers and water heaters. Plenty of these properties still run oil-fired boilers and gas water heaters behind flues that were never designed for a modern insert. So the job is as much about venting safety for heating appliances in century-old masonry as it is about sweeping creosote. Here are the Gelco issues we see most.
- Clogged or crushed horizontal vent terminations on direct-vent Gelco inserts. The termination is the exhaust’s only exit. When it packs with soot, lint or debris, or when the run gets crushed or kinked behind the unit, exhaust recirculates and trips the spillage or limit switch. The insert shuts off mid-cycle, and the owner assumes the fireplace is broken when the vent is the problem.
- Seized or dropped damper and damper-clip assemblies on Gelco wood inserts. The damper sits idle through long damp months and the pivot points corrode. A clip that falls out of its track leaves the flue partly open, so draft becomes inconsistent and smoke control unpredictable. It’s a small part with an outsized effect on how the fireplace behaves.
- Cracked or spalling refractory panels and firebox liners in Gelco gas inserts. Refractory takes repeated heat cycles and eventually cracks or flakes. A cracked panel lets heat reach the surround and the framing behind it, which is a genuine safety concern, not cosmetic wear. Freeze-thaw cycles and damp winters here speed that deterioration.
- Cap and termination screens packed with creosote, soot or nesting. Gelco caps and multi-flue caps do their job until the screen loads up. Once airflow is restricted, smoke pushes back into the room and the appliance starves for draft. Flatbush’s cold, damp winters mean heating systems run hard from November through March, so screens clog faster than owners expect.
- Party-wall chimney interactions. On many blocks in Victorian Flatbush, the stack is shared between adjacent rowhouses. A flue problem on one side can quietly affect the neighbor’s venting, so a proper diagnosis means checking both sides of the party-wall chimney before concluding the problem is contained to one house.
Gelco Parts & Our Repair-vs-Replace Approach
We inspect before we recommend. That principle carries real weight with Gelco equipment, because the same symptom can point to a cleaning, a damper fix or a replacement decision. The choice comes down to what our inspection actually shows.
For parts, we source quality aftermarket gaskets, dampers, refractory panels and caps matched to your unit’s specifications. We don’t claim a stock of OEM or genuine Gelco parts, and we won’t pretend a discontinued part is available when it isn’t. When we can repair safely, we repair. When a cracked firebox or discontinued venting makes a repair a temporary patch on a system that no longer meets its original design, we say so honestly and lay out the replacement path.
If your Gelco insert is acting up, call (866) 937-7157 and we’ll inspect it before recommending anything.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 inspection, camera and all, because Gelco insert problems usually live where you can’t see them: the vent termination, the vent run behind the unit, the refractory panels. We document what we find with photos.
- 2
Repair or install. Depending on what the inspection shows, we clean the flue and termination, repair a damper, replace gaskets, or install a new cap to manufacturer specification. We use parts matched to the unit’s specs.
- 3
Test. We run the appliance and confirm draft, spillage performance and shutdown behavior before we call the job done. An insert that still trips its limit switch hasn’t been fixed.
- 4
Warranty. We follow the manufacturer’s venting and clearance requirements so the work stays warranty-safe, and we give you a record of what was done and what we found.
A Gelco gas insert often starts smoking or shutting off after years of use because the vent termination or cap screen has clogged with soot and debris. The fix is to pull the insert, inspect the vent run and refractory panels at Level 2 depth, clean the flue and termination, and replace gaskets or a seized damper as needed. On the wood-insert side, a common call is a damper that no longer seats or a firebox with spalling panels; we clean, evaluate, and either repair or flag for replacement.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Flatbush
We work across the full Gelco line you’re likely to find in a Flatbush home: direct-vent gas fireplace inserts, B-vent gas fireplace units, wood-burning fireplace inserts with glass doors, and universal and multi-flue chimney caps. Each presents its own service reality. Direct-vent inserts live or die by their termination and vent run. B-vent units call for attention to the vent connector and draft hood. Wood inserts need damper and firebox care, plus regular sweeping of the flue. And caps need their screens cleared and their seals checked against water intrusion, especially with the freeze-thaw cycles we get here. We service all of them and install caps to manufacturer specification. Call us to book the right service for your unit.
We Also Service These Brands
Gelco is one brand of many, and we handle the others too. We work with DuraFlex flexible liner systems for retrofits and repairs in older or non-standard configurations where rigid liners won’t fit, and we offer HeatShield liner resurfacing as a structurally sound alternative to full replacement. If your home has a mix of equipment, you don’t need a different contractor for each brand.
FAQs – Gelco Chimney Cleaning Service in Flatbush
Most Gelco inserts with a problem need a Level 2 inspection, and a straightforward annual check can often be a Level 1. The difference is how deep the inspection goes into the vent run and the components behind the unit. When an insert shuts off, smokes or behaves unpredictably, a Level 1 visual check isn’t enough; the vent termination and firebox need camera inspection. We’ll tell you which level your situation calls for before we start. Call (866) 937-7157 for an exact quote – estimates are free.
Because its vent termination or cap screen is likely clogged, recirculating exhaust and tripping the spillage or limit switch. It can also mean a crushed or kinked vent run behind the unit. Either way, the insert is protecting itself by shutting off, and the cause won’t clear on its own. The fix starts with a Level 2 inspection to see which it is.
Yes, in most cases. A seized damper or a damper clip that’s fallen out of track usually can be cleaned, freed or replaced with a part matched to the unit. The one exception is a damper whose housing or surrounding metal is badly warped; then we’ll be honest that a repair won’t hold.
Yes, cracked or spalling refractory panels are serious. They let heat reach the surround and framing behind the insert, which is a safety concern rather than cosmetic wear. Don’t run the unit until a professional evaluates it. We’ll inspect the panels and tell you whether they can be repaired or whether replacement is the safer call. Call (866) 937-7157 – estimates are free.
We use quality aftermarket parts matched to your unit’s specifications, not OEM Gelco parts. OEM components can be scarce or slow for older insert lines, so we source aftermarket gaskets, dampers, refractory panels and caps that fit correctly. We’ll never pass a part off as genuine when it isn’t.
Not when the work follows the manufacturer’s venting and clearance requirements, which is what we do. We document the system’s condition and the work performed so you have a record. Read your warranty terms, and ask us any question before we touch the unit.
Gelco cleaning and service is priced per job by a written estimate, and the estimate is free. Several variables affect the total: whether a Level 2 inspection is needed, whether gaskets or a damper have to be replaced, and the condition of the vent termination. Nothing is recommended without camera evidence you can see for yourself. Call (866) 937-7157 for an exact quote – estimates are free.
Book Your Gelco Service in Flatbush, NY
Whether your Gelco gas insert keeps shutting off, your wood-insert damper won’t seat, or you just want a documented inspection before you decide anything, we’re ready to help. Call (866) 937-7157 for a free estimate and we’ll get you on the schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.