Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Mill Basin?
Chimney cleaning in Mill Basin typically costs $150 to $350 for a standard sweep of a wood-burning fireplace flue, and $300 to $600 when a Level 2 camera inspection or a heavy creosote buildup is involved. A simple sweep on a well-maintained chimney with easy roof access lands near the low end, while a neglected flue with glazed creosote, an offset, or a tight roofline pushes toward the top. The written estimate sets the final price, and estimates are free.
We’re Chimney Sweep Flatbush, and we handle the whole chimney system in Mill Basin, from the firebox up through the smoke chamber to the cap. Our technicians have up to 9 years of experience, and we inspect before we recommend. If you want to know what your sweep will cost, call (866) 937-7157. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard wood-burning flue sweep in Mill Basin: roughly $150 to $350.
- Sweep plus a Level 2 inspection: roughly $300 to $600.
- Heavy or glazed creosote that needs extra work: made clear at inspection, priced in writing before we start.
- The estimate is free, and you get a written price per job, not a range carried on a phone call.
- Chimney inspection is a standalone service, so you can document the system before you commit to any repair.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the numbers stack up for the Mill Basin market in 2026. These are typical ranges, not a set menu. Your written estimate is what counts.
| Line item | Typical range (Mill Basin, 2026) |
|---|---|
| Standard chimney sweep (one wood-burning flue) | $150 – $350 |
| Additional flue on the same chimney | $75 – $175 per flue |
| Sweep with a Level 2 camera inspection (video scan of flue interior) | $300 – $600 |
| Chimney cap installation (Famco or Gelco, manufacturer-spec) | $175 – $425 |
| Crown repair or rebuild | $300 – $900 |
| Firebox or damper repair | $200 – $700 |
| HeatShield liner resurfacing (cost-effective alternative to full reline) | $1,600 – $3,200 |
| DuraFlex flexible liner replacement (full reline, retrofit) | $2,800 – $6,500 |
| Heavy or glazed creosote removal (extra labor beyond a standard sweep) | $200 – $500 added |
A standard sweep is the floor of the pricing. The moment we add a camera inspection, a cap, or structural work, the number moves. That’s why we lead with inspection: we won’t hand you a repair price until we’ve seen the inside of the flue. The written estimate is the price you pay.
What drives the number up or down
Three things move a Mill Basin chimney quote more than anything else. First, creosote stage: light, dusty soot brushes out clean; glazed, tar-like deposits take longer and cost more. Second, access: a chimney that’s easy to reach from the roof edge is faster to sweep than one boxed in behind a roofline or crowded by a neighbor’s addition. Third, scope: a sweep alone is one price; a sweep with a documented inspection, or one that turns up a cracked crown or failing liner, is a different job. We don’t run a truck full of one-size-fits-all parts. We source from six professional chimney-industry brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so the material we quote is the material that fits your chimney.
What Affects Chimney Cleaning Pricing in Mill Basin
Mill Basin is a low-rise neighborhood of tile-roofed houses, a lot of them two-story, often with an older masonry chimney tucked into a hipped roof. Those handful of details matter to a sweep’s price. Here’s what pulls the number around:
- Flue type and condition. A straight, unlined or clay-tiled wood-burning flue sweeps quickly. A flue with offsets, a tight smoke chamber, or heavy glazed creosote takes more passes and more time, so the price climbs.
- Number of flues. A single fireplace is one flue. A house that also has a solid-fuel appliance or a second chimney adds a flue and adds cost per flue.
- Roof access and pitch. Some Mill Basin rooflines are easy to walk near the ridge; others are steep, cut up by dormers, or crowded by a narrow gap between houses. Hard access is a real labor cost, not a hidden upcharge.
- Whether a camera inspection is included. A sweep alone checks and cleans the flue from the firebox side; a Level 2 camera inspection adds a full video survey. That’s the difference between the $150 – $350 band and the $300 – $600 band.
- Cap and crown condition. A cap that’s missing or rusted through lets water and animals into the flue. We fit Famco and Gelco caps to manufacturer spec, and a crown that’s cracked or crumbling is priced separately, because it’s repair work, not sweeping.
- What the sweep finds inside. Sometimes the flue is sound and clean and the price is the sweep. Sometimes it isn’t. When we find a spalling liner or a gapped smoke chamber, we explain it, show the inspection, and quote a fix you can take or leave. No obligation to bundle.
What a standard Mill Basin sweep actually includes
A proper sweep covers the firebox, the damper area, the smoke chamber, and the full length of the flue, with drop cloths down and a high-efficiency vacuum running so ash stays in the bag, not in your living room. We use Copperfield specialty tools for the sweep and inspection work – the same level of equipment a commercial contractor relies on. The goal is a clean flue and a straight answer about its condition.
Safety: the part a price can’t skip
A chimney is one of the genuinely dangerous parts of a house. A flue choked with glazed creosote, a crumbling liner, or a leaking smoke chamber is a fire and carbon monoxide hazard, and those are not jobs for a homeowner with a brush on a pole. A sweep and inspection by a trained technician is how you know what’s in there. If a technician finds a defect that needs attention, take that seriously – the cost of an inspection is small next to what a chimney fire or a silent CO leak can cost.
How to Save on Chimney Cleaning
There’s no honest magic trick for a lower sweep price in Mill Basin, but several things keep the number down over time.
- Get swept before creosote gets heavy. A lightly-sooted flue is a quick sweep. A flue left a few seasons glazes over and costs more to clean and more to inspect. Regular maintenance pays for itself here.
- Pair the sweep with a standalone inspection. We offer chimney inspection as its own service with no obligation to bundle any repair. You get a documented picture of your liner, cap, crown, and firebox, and you decide what to fix and when. It’s often cheaper than discovering a problem during a heating emergency.
- Look at HeatShield before you reline. If your flue has a structural crack but is otherwise a standard shape, HeatShield liner resurfacing restores it from the inside at a fraction of the cost of a full DuraFlex reline. We won’t push a reline you don’t need.
- Ask for the cap while you’re already up there. Fitting a Famco or Gelco cap during a sweep is less expensive than a separate visit, and a good cap keeps water and animals out, which protects the liner and extends the time between repairs.
- Burn seasoned wood. Dry wood burns hotter and cleaner, which means less creosote and fewer heavy-cleanup visits. It’s a free habit with a real price effect.
- Get the estimate in writing. Every job we quote is priced per job by the written estimate, so you know the number before we start. Estimates are free. Call (866) 937-7157 to book one.
And if you need a general sweep in the neighborhood to your south, chimney sweep flatbush is where we list our Flatbush services; the same inspection-first approach applies.
Repair or replace? When it’s worth the higher number
It’s not always about the cheapest sweep. If the inspection shows a liner that’s cracked along its length, a reline with DuraFlex flexible liner systems is the honest fix – it’s built to fit non-standard or older masonry flues where a rigid liner physically won’t. If the liner is sound but the surface is damaged, HeatShield resurfacing can restore it at a lower cost. The decision comes down to the inspection, not a sales pitch. We’ll show you the camera scan and quote both paths when both are real options.
What about the cap and crown?
The cap and crown are the parts of the chimney that take the weather directly, so they’re also where a small, cheap fix prevents a large, expensive one. A crown that’s spalling or a cap that’s missing lets in water, and water in a chimney leads to spalling brick, rusting dampers, and liner damage. If your sweep turns up a crown issue, we’ll quote the repair clearly. If the cap is simply past its life, we install manufacturer-spec caps from Famco and Gelco that are made for the job.
Fireplace and firebox repair pricing
Fireplace work is a separate category from the sweep, and it has its own range. A firebox with a cracked back wall or a damper that won’t open and close is a repair item. We handle fireplace repair alongside sweeping and inspection, so the firebox, damper, and flue are assessed together and the quote covers the whole system rather than one piece of it.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Mill Basin?
A standard wood-burning flue sweep in Mill Basin typically runs $150 to $350. That’s for one flue; additional flues on the same chimney usually add $75 to $175 each. Call (866) 937-7157 for an exact quote – estimates are free.
Is chimney cleaning more expensive if my chimney is dirty?
Yes, heavy or glazed creosote can add roughly $200 to $500 to a standard sweep because it takes more time and more passes to clear. The only way to know is the inspection. We quote in writing before we start, so the number you see is the number you pay. Call (866) 937-7157 to book a free estimate.
Do I need a camera inspection with my sweep, or can I skip it?
A Level 2 camera inspection typically adds $150 to $250 on top of a sweep, moving the total to the $300 to $600 band. It’s not mandatory for a clean, well-maintained flue, but it’s the only way to see the liner interior, the smoke chamber, and any hidden damage. We offer inspection as a standalone, no-obligation service, so you can get the picture first. Call (866) 937-7157 for pricing.
Is it cheaper to resurface or replace a chimney liner?
HeatShield liner resurfacing typically costs $1,600 to $3,200, while a full DuraFlex reline runs $2,800 to $6,500 – so resurfacing is usually the lower-cost path when the flue is structurally sound and a standard shape. A reline is the right call when the liner has failed outright or the flue is non-standard. The inspection decides which is honest for your chimney. Call (866) 937-7157 for a written estimate.
Can you clean my chimney the same day I call?
Same-day sweeps are often possible in Mill Basin, depending on the schedule and the chimney. We answer the phone 24/7, and we dispatch from 7am to 7pm, Sunday through Friday. Call (866) 937-7157 to check today’s availability – the estimate is free.
How much does a chimney cap cost in Mill Basin?
A manufacturer-spec Famco or Gelco cap typically costs $175 to $425 installed, depending on the cap type and how it’s fitted. A cap is the cheapest protection against water and animals getting into the flue. Call (866) 937-7157 for the exact number.
Chimney cleaning in Mill Basin doesn’t have to be a guessing game. You get a free estimate, a written per-job price, and an inspection-first approach that tells you what your chimney actually needs before anything is quoted. Our technicians have up to 9 years of experience, and we work the full system from firebox to cap. To book a sweep or an inspection, call (866) 937-7157. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One company for the full chimney system, and the written estimate is the final word on price.
Pricing reflects the Mill Basin market as of 2026. Chimney Sweep Flatbush offers free estimates – call (866) 937-7157.
Written by the team at Chimney Sweep Flatbush.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniel Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kevin Nguyen