Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Borough Park?
Chimney cleaning in Borough Park typically costs $150 to $290 for a standard sweep of a wood-burning flue, and most single-flue homes in the neighborhood fall in the $180 to $250 range. A first-time sweep that includes a level-one inspection usually lands between $200 and $320. Anything above that almost always means the technician found creosote buildup, a damaged cap, or a flue that has never been cleaned, and those fixes get priced separately in a written estimate before any work begins.
We inspect before we recommend. That’s the whole reason our pricing starts with a documented look at your firebox, smoke chamber, flue, and cap rather than a flat number pulled off a clipboard. If a sweep is all you need, that’s all you pay for. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Here’s what the individual pieces of a chimney cleaning job run in Borough Park this year. These are typical ranges for residential wood-burning and solid-fuel systems. The written estimate you get on-site sets the final price.
| Service | Typical Price Range | What It Covers |
|---|---|---|
| Standard chimney sweep (single flue) | $150 – $290 | Brush and vacuum cleaning of the flue, firebox, and smoke shelf; basic creosote removal |
| Sweep plus level-one inspection | $200 – $320 | Sweep with a documented visual inspection of the accessible chimney interior and exterior |
| Heavy creosote removal (stage 3) | $350 – $650 | Glazed, hardened creosote that needs chemical treatment and mechanical removal |
| Multi-flue sweep (second flue) | $90 – $160 additional | Each extra flue cleaned on the same visit |
| Chimney cap installation (Famco or Gelco) | $180 – $420 | Manufacturer-spec stainless or galvanized cap fitted to the flue opening |
| Crown repair or rebuild | $350 – $900 | Sealing hairline cracks up to a partial crown replacement |
| HeatShield liner resurfacing | $1,400 – $2,800 | Cast-in-place resurfacing of a cracked or pitted clay liner |
| DuraFlex flexible liner installation | $2,200 – $4,500 | Full stainless liner retrofit for a failed or unlined flue |
| Standalone chimney inspection (level two) | $150 – $350 | Documented assessment with no obligation to book repair work |
What pushes a Borough Park cleaning toward the top of the range? Creosote stage is the biggest driver. A flue that’s been swept annually rarely builds past stage 1 or 2, which is a straightforward brush-and-vacuum job. A flue that hasn’t seen a brush in several seasons can carry glazed, glassy creosote that takes chemical treatment and a second visit. Flue access matters too. Roof pitch, cap type, and whether the chimney sits on a shared party wall all affect how much setup a sweep needs. And the height and configuration of a chimney on the older rowhouse stock around Borough Park sometimes means a flexible liner setup rather than a straight brush drop, which is where DuraFlex systems come in.
What Affects Chimney Cleaning Pricing in Borough Park
Two homes on the same block can get quoted very different numbers. Here’s what actually moves the price in this neighborhood.
- Creosote stage. Stage 1 (light soot) sweeps in a single pass. Stage 2 (flakey, medium buildup) takes longer and more care. Stage 3 (glazed, hardened creosote) needs chemical treatment and often a follow-up visit, so it runs at the top of the range.
- Number of flues. Many Borough Park homes have a fireplace flue plus a separate flue for a boiler or solid-fuel stove. Each additional flue is cleaned on the same visit but adds to the total.
- Chimney height and roofline access. Tall chimneys, steep rooflines, and chimneys that sit close to neighboring structures take more time to set up safely. That’s a labor factor, not a markup.
- Cap and crown condition. If the cap is missing or the crown has cracked open, we flag it during the sweep. Fixing it then protects the flue from water intrusion that rots the liner faster than anything else. Cap installation with Famco or Gelco hardware runs $180 to $420 on top of the sweep.
- Fireplace vs. solid-fuel appliance. A wood-burning fireplace insert or a pellet stove has a different flue configuration than an open masonry fireplace, and the flue needs a compatible brush and vacuum setup.
- Whether an inspection is bundled. A standalone inspection is $150 to $350 and doesn’t obligate you to anything. Bundling it with a sweep is usually cheaper than booking both separately.
One local note worth knowing: Borough Park winters put a heavy heating load on chimneys. If you burn wood regularly from November through March, your flue accumulates creosote faster than a home that fires up a handful of times a season. An annual sweep is what keeps that buildup from crossing into stage 3 territory and jumping the price.
How to Save on Chimney Cleaning
The cheapest chimney cleaning is the one you schedule before things get expensive. Here’s how to keep the number at the low end.
- Book an annual sweep. A yearly cleaning keeps creosote at stage 1 or 2 and keeps the job in the $150 to $290 band. Skip two or three years and you’re looking at heavy-removal pricing.
- Get a standalone inspection first if you’re unsure. A documented inspection tells you exactly what condition the flue is in before you commit to any repair. We offer this as a no-commitment service because we’d rather you make an informed decision than buy work you don’t need.
- Ask about HeatShield before agreeing to a full liner replacement. A cracked or pitted clay liner doesn’t always need to be torn out. HeatShield resurfacing rebuilds the liner from the inside at roughly half the cost of a full replacement, and it’s structurally sound when the original liner is still serviceable.
- Bundle the cap with the sweep. Adding a Famco or Gelco cap during the same visit saves the cost of a separate trip and protects the flue from water damage.
- Ask about a multi-flue discount. If you have two flues, cleaning both on one visit is cheaper than two separate appointments.
Estimates are always free. Call (866) 937-7157 and we’ll talk through your setup before anyone comes out. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Can You Clean My Chimney the Same Day?
Same-day chimney cleaning is often possible in Borough Park, depending on the day and the current schedule. We answer 24/7, so a call placed outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm. If you’re calling because of a smoke backup, a strange smell, or a flue that hasn’t been touched in years, tell us when you call. That helps us bring the right equipment.
What Does a Chimney Sweep Actually Do?
A sweep cleans the flue, firebox, smoke shelf, and smoke chamber, then removes the soot and creosote that accumulate on the flue walls. During the sweep, the technician checks the cap, crown, damper, and liner for cracks, gaps, or blockages. If something looks off, you get a written note before any repair work is discussed. Our technicians have up to 9 years of experience and use Copperfield specialty tools and materials on every sweep and inspection.
For a full picture of what’s involved, see our chimney sweep flatbush breakdown, or read more about how we handle chimney sweeping in Borough Park.
Is It Cheaper to Repair or Replace a Chimney Liner?
Repair is almost always cheaper than replacement when the existing clay liner is still sound. A HeatShield resurfacing runs $1,400 to $2,800, while a full DuraFlex flexible liner installation runs $2,200 to $4,500. If the original liner is cracked, pitted, or missing mortar joints but structurally intact, resurfacing restores it at a lower cost. If the liner has completely failed or the flue was never lined in the first place, a flexible stainless liner is the correct fix. We use DuraFlex systems for retrofits because they fit older and non-standard configurations where rigid liners physically won’t go. Call (866) 937-7157 for a free estimate and a straight answer on which path makes sense for your chimney.
What’s the Difference Between a Cleaning and an Inspection?
A cleaning removes creosote and soot. An inspection documents condition. They’re separate services, and an inspection is worth booking even if your flue doesn’t need a sweep yet. A level-two inspection looks at the accessible interior of the chimney, the liner, the firebox, and the exterior, and produces a written report of what’s there. It costs $150 to $350 as a standalone service and doesn’t obligate you to book any repair work with us. If you’re buying a home in Borough Park or you’ve just moved into one, book the inspection first. It tells you what you’re working with before anyone touches the flue.
Do I Need a Chimney Cleaning Every Year?
Yes, for most wood-burning fireplaces in Borough Park. Annual sweeping is the standard recommendation for any flue that sees regular use, and it’s what keeps the cost in the $150 to $290 range instead of the $350 to $650 heavy-removal range. Solid-fuel appliances and pellet stoves also need annual cleaning. If you burn only occasionally, a seasonal check plus an inspection every couple of years may be enough, but a sweep before each heating season is the safest approach. Our chimney repair in Borough Park page covers what happens when a flue goes too long between cleanings.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Borough Park?
A standard chimney cleaning in Borough Park costs $150 to $290, with most homes landing around $180 to $250. A sweep bundled with a level-one inspection typically runs $200 to $320. Heavy creosote removal pushes the price to $350 to $650. Call (866) 937-7157 for an exact quote; estimates are free.
How much does it cost to have a chimney swept and inspected at the same time?
Bundling a sweep with a level-one inspection typically costs $200 to $320 in Borough Park, compared to $150 to $290 for the sweep alone. Bundling is usually cheaper than booking each service separately. Call (866) 937-7157 to schedule both in one visit.
Can you come today for a chimney cleaning?
Same-day chimney cleaning is often available in Borough Park, depending on the schedule that day. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7157 to check availability.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper. HeatShield liner resurfacing runs $1,400 to $2,800 versus $2,200 to $4,500 for a full DuraFlex liner installation. Resurfacing works when the existing clay liner is cracked or pitted but structurally sound. Call (866) 937-7157 for a free estimate on which option fits your chimney.
How much does it cost to remove heavy creosote?
Heavy, glazed creosote removal in Borough Park typically costs $350 to $650, compared to $150 to $290 for a standard sweep. Glazed creosote needs chemical treatment and sometimes a follow-up visit. Booking an annual sweep is what keeps you out of this price range. Call (866) 937-7157 for an exact quote on your flue.
What’s the most affordable way to keep my chimney clean?
An annual sweep of $150 to $290 is the cheapest long-term path. Skipping years pushes creosote into the heavy-removal range and can lead to liner damage that costs thousands to fix. A standalone inspection at $150 to $350 documents the flue’s condition before you spend on repairs. Call (866) 937-7157 to book either service.
Key Takeaways
- Standard chimney cleaning in Borough Park: $150 to $290.
- Sweep plus level-one inspection: $200 to $320.
- Heavy creosote removal: $350 to $650.
- HeatShield liner resurfacing: $1,400 to $2,800, a lower-cost alternative to full replacement.
- Standalone inspection: $150 to $350, no obligation to book repair work.
- Annual sweeps keep the price low and protect the flue from long-term damage.
Related Services in Borough Park
We handle the full chimney system, firebox to cap, so a sweep and any repair that comes out of it stay with one company. Learn more about our chimney cap and crown work in Borough Park, fireplace repair in Borough Park, and chimney inspection in Borough Park. Neighbors in Kensington, Midwood, and Flatbush get the same pricing structure and the same inspection-first approach.
If you’re weighing a sweep against a larger repair, our chimney liner repair in Borough Park and chimney cleaning cost guide for NYC pages walk through the decision in more detail.
Contact Us for a Free Estimate
Call (866) 937-7157 for a free estimate on chimney cleaning in Borough Park. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We inspect before we recommend, so you get a written number based on what’s actually in your flue, not a flat rate pulled off a chart. If a sweep is all you need, that’s all we’ll quote you.
Pricing reflects the Borough Park market as of 2026. Chimney Sweep Flatbush offers free estimates – call (866) 937-7157.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniel Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kevin Nguyen