Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Park Slope
If you own a brownstone or a limestone townhouse in Park Slope, your chimney was probably capped long before anyone thought about how it would vent a gas fireplace or a modern wood insert. We work on Park Slope chimneys every week, and we know the housing stock here well enough to expect undersized flues, original mortar washes and shared stacks before we ever climb the ladder. A missing or failed cap is the fastest way for water to get into soft 1880s brick, so it’s worth sorting out before another nor’easter rolls through. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Park Slope Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown
We serve Park Slope as one part of a full chimney system business, which matters here. Cap and crown work on a four-story brownstone almost always turns up something else: a crumbling mortar wash, a flue that was converted to gas without a liner, or flashing that’s pulled away from the roof. Because we also handle sweeping, chimney repair, fireplace repair and standalone inspection, we’re not a cap-and-go outfit that hands you a second contractor’s number the moment the job gets structural.
Our technicians have up to 9 years of experience, and a good share of that has been spent on Park Slope’s older stacks. We fit manufacturer-spec caps from Gelco and Famco, and we use DuraFlex flexible liner systems when a flue needs relining before a cap goes back on. Our reputation in Park Slope rests on one habit: we inspect before we recommend. That means a camera run and photos you can look at yourself, not a clipboard verdict.
We’re familiar with the streets here, from Carroll to 8th Ave, and we understand the rhythm of the neighborhood. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Estimates are free and the price is set per job by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Park Slope
Cap and crown work is the weatherproofing layer of the whole chimney, and in Park Slope it’s rarely as simple as bolting on a stock cap. Here’s what we actually do on the rooftops here.
Multi-Flue Cap
Park Slope’s brownstones were built for coal, and their shared stacks usually hold four or more undersized flues running side by side. That’s why a multi-flue cap here typically has to be custom-fabricated to the row of original clay tile openings rather than bought off a shelf. We measure every opening and build to fit, so the cap sheds water without trapping moisture against a tile top that’s already tired.

Crown Repair
The crown is the mortar slab at the top that sheds water away from the stack, and on a four-story brownstone in Park Slope it’s often the original coal-era pour. Once it cracks and turns porous, meltwater soaks into soft old brick and freeze-thaw turns the surface into spalling flakes through the winter. Proper crown repair means grinding out the failed material and rebuilding it to a real outward slope, not smearing cement over the cracks.

Crown Coating
When the crown is sound but the surface has gone porous, a coating can close it up without a full re-pour. We use HeatShield resurfacing where the structure supports it, which buys years on a crown that hasn’t yet failed outright. We’ll tell you plainly when a coating is the right call and when it’s just postponing a rebuild.

Cap Installation and Cap Replacement
Missing or undersized caps on Park Slope stacks let rain, squirrels and birds straight into flues that were never lined for gas or wood. Cap replacement also comes up where an old cap was fitted over a deteriorating clay tile top and hid a crumbling mortar wash underneath. We pull the old cap, sort out what it was covering, and set the new one on a sound base. You can read more about the full range of work on our chimney cap & crown page.
Trusted Brands We Service in Park Slope
We source and install from professional chimney supply brands rather than generic hardware-store substitutes: DuraFlex for flexible liner retrofits, HeatShield for liner resurfacing and crown coating, and Gelco and Famco for cap installations built to manufacturer spec. Those names mean something to contractors, and they mean something on a Park Slope roof where a cap has to survive wind exposure at the top of a four-story row. We don’t claim to keep parts on hand. What we do is specify the right material for the stack in front of us and get it fitted correctly.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Park Slope Homes
- Cracked coal-era crowns spalling after freeze-thaw. The original crown on an 1880s to 1910s brownstone has usually been through more than a century of wet winters, and once it’s porous, water tracks down shared party-wall stacks instead of shedding off the roof.
- Missing or undersized caps on multiple flues per stack. A stack with four flues needs a cap plan for all four. One small cap on one flue leaves the rest open to rain and wildlife, especially on flues that were converted to gas without proper lining.
- Caps fitted over already-deteriorated clay tile tops. A new cap over a crumbling mortar wash looks tidy and hides the real problem. The wash should have been rebuilt before the cap went on.
- Summer humidity and roof-level wind exposure speeding up spalling. Park Slope’s damp winters drive heavy fireplace use from October through April, and the wet summer air keeps working on soft old brick at the top of the stack long after the burning season ends.
Pricing for Chimney Cap & Crown in Park Slope, NY
Cap and crown work in Park Slope is priced per job, because a single-flue cap on a small stack and a custom multi-flue cap on a four-story brownstone are different jobs. As a typical range, a single-flue cap installation runs about $250 to $550, a custom multi-flue cap for a shared stack runs roughly $600 to $1,400, crown repair with re-pouring runs about $450 to $1,200, and a crown coating runs around $350 to $800. Height, roof access, and whether the tile top needs rebuilding before a cap goes on all move the number. The written estimate sets the final price, and the estimate itself is free. Call (866) 937-7157.
We Also Serve Cities Near Park Slope
The same coal-era stacks and shared party-wall chimneys run right across this part of Brooklyn, so our cap and crown work carries into Prospect Heights, Clinton Hill, Williamsburg and Crown Heights. If you’re on the edge of Park Slope and not sure which side of the line your block falls on, call and we’ll sort it out. The work is the same either way.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Park Slope
Yes. A single multi-flue cap over all four openings is usually the right answer, and on Park Slope’s coal-era stacks it typically has to be custom-fabricated rather than bought off the shelf. The flues were laid side by side at undersized dimensions, so a stock cap rarely lines up with the tile openings. We measure each one and build to fit, with flashing re-sealed where the stack meets the roof.
You can’t tell reliably from the ground, and neither can we. A crown that’s cracked through or has lost its slope needs grinding out and re-pouring; a crown that’s sound but porous on the surface can take a HeatShield coating and last years longer. The difference shows up on camera and in a close look at the slab. Call (866) 937-7157 for a free estimate, and we’ll show you what we find.
Yes, and often more so. A gas conversion leaves a flue that was never lined for gas, and an open top lets rain straight down into it along with squirrels and birds. Many Park Slope flues were capped or converted without proper lining, which makes a correctly fitted cap the cheap protection. It keeps water and wildlife out while we assess whether the flue itself needs work. Call (866) 937-7157 to book an inspection.
Because a crown recommendation without camera evidence is a guess, and on Park Slope’s old shared stacks the guess is often expensive and wrong. This is where the worst upselling in the trade happens: a contractor quotes a full rebuild off a glance from the roof. We run a camera, hand you the photos, and explain what we see. If the work can safely wait, we’ll say so. Call (866) 937-7157.
It can, and that’s worth knowing before anyone starts. Shared stacks in Park Slope’s brownstone rows are often a single masonry structure serving two houses, and work on one side can affect flashing, mortar joints and water paths on the other. The usual fix includes re-sealing flashing where the stack meets the roof on both sides. In practice a sweep here sometimes turns into a two-house coordination job. Call (866) 937-7157 and we’ll walk you through what your stack actually needs.
If your cap is missing, your crown is cracked, or you just want a straight answer about what’s up there, call Chimney Sweep Flatbush at (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We inspect before we recommend, and nothing gets quoted without camera evidence you can see for yourself.
Written by the team at Chimney Sweep Flatbush.