Chimney Cap & Crown in Mill Basin, NY | Chimney Sweep Flatbush

Chimney Cap & Crown in Mill Basin - Measured and Fitted, One Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Cap & Crown Across Mill Basin

If your chimney crown is crumbling or your cap has rusted through, we can help. We handle chimney cap & crown work across Mill Basin, from the brick colonials on the interior streets to the newer custom homes along the bay and canals. Mill Basin weather is hard on a chimney top: salty air, wind-driven rain, and freeze-thaw cycles all attack mortar and metal. That’s why we look closely at the whole stack before recommending anything. For an estimate, call (866) 937-7157. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Call (866) 937-7157

Why Mill Basin Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown

Mill Basin homeowners and property managers call us because we inspect before we recommend. A cap that looks fine from the yard can hide cracked flue tiles or a crown that’s stopped shedding water. We check the flue, the smoke chamber, the crown, and the flashing, then show you what we found and explain what can wait.

We’re a full-lifecycle chimney company, not a sweep-and-go outfit. That means one company handles the whole system, from firebox to cap, rather than sending you to a separate mason for the crown and a separate sweep for the flue. We fit caps from Famco and Olympia Chimney, sized to the appliance count, and we use HeatShield resurfacing where a liner can be restored instead of replaced. Our technicians have up to 9 years of experience. We serve Mill Basin and the surrounding blocks of Bergen Beach, Marine Park, Flatlands, and East Flatbush.

We don’t manufacture urgency. If your crown has another few seasons in it, we’ll tell you. If a cracked flue tile means the cap is sealing in a problem, that’s worth fixing now. Either way, you decide with the inspection report in front of you.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Chimney Cap & Crown Services in Mill Basin

Custom Cap

Mill Basin’s oversized custom homes and its older brick houses rarely share a flue configuration, so a stock cap often fits badly or not at all. We measure the flue, the appliance count, and the crown dimensions, then have a cap built to fit. On the peninsula’s larger rebuilds, that often means a cap sized around a factory-built fireplace rather than the original masonry flue.

Custom Cap

Crown Repair

A crown that’s cracked or spalling lets water straight into the flue. We cut away the failed mortar, rebuild the crown with the proper slope away from the flue, and tie it in so it sheds water the way it should. On canal-side and bay-front streets, salt spray and damp pit the mortar faster than inland, so crown repair is common here. We confirm the flue liner and smoke chamber are sound before we seal the top with a new cap.

Crown Repair

Crown Coating

Not every crown needs a full rebuild. Where the mortar is still sound but the surface has started to erode, a crown coating can seal it and buy years before a rebuild. We’ll tell you plainly which one your crown needs, and we won’t push a rebuild where a coating will hold.

Crown Coating

Multi-Flue Cap

A house with two fireplaces and a gas insert needs one cap sized to all of it, not three separate caps fighting for space. We fit stainless multi-flue caps from Olympia Chimney and Famco, built to the appliance count on the stack. On Mill Basin’s mansion rebuilds, a single-flue cap often gets left on a stack that now has a second appliance, and that’s a venting problem worth catching early. Learn more about our Chimney Cap & Crown work and how we size a cap to the whole stack.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 937-7157

Trusted Brands We Service in Mill Basin

We source and install caps from Famco and Olympia Chimney, and we use DuraFlex flexible liner systems where a retrofit needs one. Those materials come from professional chimney suppliers, not the hardware store shelf. We don’t claim to stock parts locally; we order what your stack actually needs and schedule the install once it’s in. If your chimney carries a HeatShield-resurfaced liner, we check it before we cap anything, because a new cap over a failing liner just traps the problem inside.

Common Chimney Cap & Crown Problems We See in Mill Basin Homes

  • Cracked clay tile liners under a cap that looks fine. Decades of freeze-thaw and coastal damp open gaps in the original clay tiles on the postwar and 1960s-70s brick houses. From the ground the cap looks intact, but the liner beneath it has lost its seal and the draft with it.
  • Crowns eroded to spalling on the water-facing streets. Salt-laden air off Jamaica Bay and nor’easter rain eat at the mortar until the crown stops shedding water. Once it holds water, freeze-thaw finishes the job and the crown cracks open.
  • Undersized caps on the mansion rebuilds. Factory-built fireplaces added during the post-1990 rebuilds often got a single-flue cap that ignores the second appliance. Those stacks need a Level 2 inspection of the venting, not just a cap swap.
  • Efflorescence and spalling on the brick face. On bay-front and canal-side blocks, techs routinely find chimney exteriors pitted by salt spray and damp, with white salt bloom on the brick. It’s a sign moisture is getting in and the crown and flashing need attention.

Pricing for Chimney Cap & Crown in Mill Basin, NY

Pricing in Mill Basin runs in a typical range for the work. These are estimates, and the written estimate you get after inspection sets the final price.

Service Typical Mill Basin range
Crown coating (sound mortar, surface erosion) $450 – $900
Crown repair or rebuild $900 – $2,200
Single-flue cap, installed $250 – $600
Multi-flue stainless cap, installed $600 – $1,400
Custom cap for an oversized or non-standard stack $900 – $1,800

What moves the price: appliance count on the stack, whether the crown needs a rebuild or just a coating, cap size and material, and whether the liner underneath is sound. On a two-fireplace house the cap cost goes up, but so does what a bad cap costs you later. We give you the written estimate before any work begins, and the estimate is free.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 937-7157

How Mill Basin’s Mix of Old and New Stacks Shapes the Work

Mill Basin is a low-rise, owner-occupied, single-family enclave on Jamaica Bay, and that shapes what a cap and crown job looks like here. The interior streets are lined with postwar through 1970s brick colonials, ranches, and split-levels built on filled marshland, most with original clay-tile flues that have taken decades of freeze-thaw and coastal damp. Along the bay and canals, the post-1990 mansion rebuilds sit beside those untouched older houses, so a single 11234 block can need a custom multi-flue cap for a new factory-built fireplace and a crown rebuild on an original clay-tile stack at the same time. That mix of aging original flues and newer high-end installs in one small zip is what sets the trade here apart from the rowhouse work in neighboring Flatbush or Cansears.

On bay-front and canal-side blocks, salt spray and wind-driven rain pit the mortar of a chimney crown until it cracks and holds water, and the same damp works into the brick face, leaving efflorescence and spalling. A qualified local tech typically cuts away the failed crown, pours or coats a new sloped crown tied into the flue, reseals the flashing, and fits a stainless multi-flue cap sized to the appliance count. That means first confirming the flue liner and smoke chamber are sound, so the new cap isn’t sealing in an already compromised stack. On the interior streets, flues in older homes sometimes sit unused for years and hide cracked tiles or animal nests, so an inspection here has to check both the salty outside and the abandoned inside.

We Also Serve Cities Near Mill Basin

We work throughout Mill Basin and the surrounding neighborhoods. If you’re in Bergen Beach, Marine Park, Flatlands, or East Flatbush, we cover the same cap and crown work there, and the salt-and-damp conditions along the water follow the shoreline into those blocks too. Call and tell us where you are.

Serving Mill Basin, NY – Our Local Coverage Area

We serve Mill Basin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Chimney Cap & Crown in Mill Basin

Book Your Mill Basin Chimney Cap & Crown Estimate

If your crown is crumbling or your cap has seen better days, call us for a free estimate. We’ll inspect the whole stack, show you what we find, and give you a written price before any work begins. Call (866) 937-7157. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Flatbush.

Why Mill Basin Chooses Chimney Sweep Flatbush

We set the standard for chimney cap & crown in Mill Basin.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Mill Basin

Getting your chimney cap & crown project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Mill Basin Customers Say

Trusted by homeowners across Mill Basin and surrounding areas.

★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Mark Gallagher
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Daniel Walsh
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Kevin Nguyen

Ready for Chimney Cap & Crown in Mill Basin?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Mill Basin.

(866) 937-7157

Request a Free Estimate in Mill Basin

Tell us about your chimney cap & crown needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Chimney Sweep FlatbushChimney Sweep KensingtonChimney Sweep East FlatbushChimney Sweep FlatlandsChimney Sweep Crown HeightsChimney Sweep MidwoodChimney Sweep Borough ParkChimney Sweep Prospect HeightsChimney Sweep Park SlopeChimney Sweep BrownsvilleChimney Sweep Marine ParkChimney Sweep Mill BasinChimney Sweep Bergen BeachChimney Sweep Sunset ParkChimney Sweep WilliamsburgChimney Sweep Clinton HillChimney Cap & Crown FlatbushChimney Cap & Crown KensingtonChimney Cap & Crown East FlatbushChimney Cap & Crown FlatlandsChimney Cap & Crown Crown HeightsChimney Cap & Crown MidwoodChimney Cap & Crown Borough ParkChimney Cap & Crown Prospect HeightsChimney Cap & Crown Park SlopeChimney Cap & Crown BrownsvilleChimney Cap & Crown Marine ParkChimney Cap & Crown Mill BasinChimney Cap & Crown Bergen BeachChimney Cap & Crown Sunset ParkChimney Cap & Crown WilliamsburgChimney Cap & Crown Clinton HillChimney Repair FlatbushChimney Repair KensingtonChimney Repair East FlatbushChimney Repair FlatlandsChimney Repair Crown HeightsChimney Repair MidwoodChimney Repair Borough ParkChimney Repair Prospect HeightsChimney Repair Park SlopeChimney Repair BrownsvilleChimney Repair Marine ParkChimney Repair Mill BasinChimney Repair Bergen BeachChimney Repair Sunset ParkChimney Repair WilliamsburgChimney Repair Clinton HillFireplace Repair FlatbushFireplace Repair KensingtonFireplace Repair East FlatbushFireplace Repair FlatlandsFireplace Repair Crown HeightsFireplace Repair MidwoodFireplace Repair Borough ParkFireplace Repair Prospect HeightsFireplace Repair Park SlopeFireplace Repair BrownsvilleFireplace Repair Marine ParkFireplace Repair Mill BasinFireplace Repair Bergen BeachFireplace Repair Sunset ParkFireplace Repair WilliamsburgFireplace Repair Clinton HillChimney Inspection FlatbushChimney Inspection KensingtonChimney Inspection East FlatbushChimney Inspection FlatlandsChimney Inspection Crown HeightsChimney Inspection MidwoodChimney Inspection Borough ParkChimney Inspection Prospect HeightsChimney Inspection Park SlopeChimney Inspection BrownsvilleChimney Inspection Marine ParkChimney Inspection Mill BasinChimney Inspection Bergen BeachChimney Inspection Sunset ParkChimney Inspection WilliamsburgChimney Inspection Clinton Hill
Call Now - We Answer 24/7