Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Flatlands
If your Flatlands chimney cap is rusting through or the crown has a crack running toward the brick, we can help. We handle cap installation, cap replacement, crown repair and crown coating on the single-family homes and duplexes that make up most of this part of southeastern Brooklyn, and we know how salt air off the nearby water treats a chimney here. Our technicians have up to 9 years of experience, and every job starts with a look at the flue before we recommend anything. Call (866) 937-7157. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Flatlands Homeowners Call Chimney Sweep Flatbush for Chimney Cap & Crown
We’re a full-lifecycle chimney company, not a sweep-and-go outfit. That matters in Flatlands because cap and crown problems rarely sit alone. A rusted cap usually means water has been getting into the flue, and the flue tells you whether the crown failed first or the cap did. We work across the whole system, from firebox to cap, so we can trace the water back to its source instead of patching the top and hoping.
We inspect before we recommend. You get a documented look at the chimney, including photos, and nothing gets scheduled until you’ve seen what we see. If the crown can safely wait a season, we’ll tell you that too. We fit stainless and copper caps and work with professional-grade brands including Gelco, Olympia Chimney and DuraFlex, the same materials commercial contractors use. Our technicians have up to 9 years of experience. A written, flat-price estimate is agreed before any work is booked, and the local pro who does the job is licensed and insured as their state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Flatlands
Cap Installation
On a Flatlands chimney with an open flue, a proper cap is the first line of defense against rain, birds and downdrafts. We set stainless or copper caps sized to the actual flue opening, not a generic hardware-store cover. If your flue is orphaned, the right cap plus a stainless mesh screen keeps water out of a chimney that no longer has a fire under it.

Cap Replacement
Galvanised caps rust through at the seams within a few seasons of salt air, and once a seam opens, water runs straight down an unlined flue. We pull the old cap, inspect the tile below for spalling, then set a stainless or copper replacement built for coastal exposure. That’s the fix that holds up here.

Crown Repair
Original mortar crowns on 1920s – 1950s Flatlands brick chimneys often lack a proper drip edge, so water wicks into the brick and clay tile below. Where the crown is cracked or spalled, we rebuild it with the correct overhang and drip edge so water sheds clear of the masonry instead of into the smoke chamber.

Crown Coating
When a crown is sound but the surface is starting to break down, coating can buy years before a rebuild. We use HeatShield resurfacing where it’s the right call, since it gives a real repair path without the expense of tearing out a crown that’s still structurally fine. If the crown is too far gone for coating, we’ll say so.
Trusted Brands We Service in Flatlands
We work with six professional chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. In Flatlands, that usually means a Gelco or Olympia Chimney cap and a HeatShield coating on a crown that’s still worth saving, or a DuraFlex flexible liner when the flue turns out to be an unlined orphaned tile. These are the same materials commercial contractors specify, not generic substitutes. We connect you with local pros who install to manufacturer spec.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Flatlands Homes
- Galvanised caps rusted at the seams. Salt-laden damp winters eat through the thin steel on older caps within a few seasons, and once a seam opens, water runs down an unlined orphaned flue.
- Cracked mortar crowns with no drip edge. Original crowns on Flatlands brick chimneys often wick water into the brick and clay tile below, which shows up as spalling and efflorescence on the chimney face long before anything looks wrong from the ground.
- Corroded or pulled step flashing. On the tight lots and shared driveways that shape Flatlands’ housing stock, step flashing at the chimney-to-roof joint corrodes or lifts, and nor’easter-driven rain finds its way into the attic and smoke chamber.
- Rain down an uncapped flue. Coastal Brooklyn’s damp winters and humid summers speed up mortar joint deterioration, and a chimney that’s been sitting open since a furnace swap has been taking that weather year after year.
Pricing for Chimney Cap & Crown in Flatlands, NY
Flatlands cap and crown work is priced per job, and the written estimate sets the final price. Typical ranges for this market:
- Cap installation, single flue (stainless): $275 – $525
- Cap replacement, multi-flue stainless or copper: $425 – $850
- Crown repair, partial rebuild with drip edge: $450 – $950
- Crown coating with HeatShield resurfacing: $425 – $775
- Custom cap sized to an irregular or multi-flue chimney: $750 – $1,400
Copper and larger custom caps sit at the higher end because of the material and the shaping. A short ladder access across a shared driveway can add time. Estimates are free, and if the crown can safely wait a season, we’ll tell you that too.
We Also Serve Cities Near Flatlands
We work across southeastern Brooklyn, including Midwood, Bergen Beach, Marine Park and Mill Basin, and we bring the same inspection-first approach to Flatlands and the streets around it. If your chimney sits near the water or on one of the older brick blocks, the salt-air story is the same one we plan for here.
Serving Flatlands, NY – Our Local Coverage Area
We serve Flatlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Flatlands
Flatlands sits close enough to the water that salt-laden damp air accelerates corrosion on galvanised caps, so thin steel caps rust through at the seams within a few seasons instead of lasting a decade. Stainless or copper replacements hold up far better in that exposure. Call (866) 937-7157 for an exact quote, and estimates are free.
Yes. Postwar oil-to-gas conversions across Flatlands often left orphaned flues that were never re-lined or capped, so the chimney may be taking rain straight down an open tile even though it hasn’t seen a fire in years. An inspection tells you whether the flue is sound, lined, or venting gas safely. Call (866) 937-7157 to book a look before you decide on anything else.
Once a year is the practical interval here, given the coastal damp and salt air. That’s often enough to catch a rusting cap or a hairline crown crack before water reaches the masonry. If your chimney is uncapped right now, an inspection is worth doing before another nor’easter. Call (866) 937-7157 for a free estimate.
Coating resurfaced a crown that’s structurally sound but starting to break down on the surface, while repair rebuilds a crown that’s cracked or lost its drip edge. Coating is the less expensive path and it buys years, but only when the crown underneath can still carry it. We inspect first and tell you which one your crown actually needs. Call (866) 937-7157 for an exact quote.
A custom cap can help because it’s sized to your actual flue configuration instead of a stock cover, and that means fewer gaps where rain and birds get in. On a tight lot with a shared driveway, a cap that fits correctly is also easier to set cleanly from a ladder. Estimates are free, so call (866) 937-7157 and we’ll walk through what your chimney needs.
If you’ve got a rusted cap, a cracked crown or an open flue you’re not sure about, we can take a look and tell you what’s actually going on. We connect Flatlands homeowners with vetted local pros who inspect before they recommend, price per job by written estimate, and work with the professional-grade materials this coastal exposure calls for. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Flatbush.