Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Flatbush Homeowners
A fireplace that smokes into the room, won’t hold a draft, or won’t light at all is a problem you want diagnosed by someone who understands the whole system, not just the part that’s visibly broken. Our technicians have up to 9 years of experience with wood-burning and gas fireplaces, and we inspect before we recommend. That means you get a clear account of what’s wrong, what it will take to fix it, and what can safely wait. We know the brick rowhouses and older apartment buildings around Flatbush, where fireplaces were built to vent through shared or narrow flues, and we work with the materials those systems actually need. Same-day service is often possible when you call early. Reach us at (866) 937-7157.
What Our Fireplace Repair Service Includes
We handle the fireplace as a system: the firebox, the damper, the smoke chamber, the flue, and the cap above it. Repairs are scoped and priced per job by a written estimate, so you know the cost before anyone starts.
Gas Fireplace Repair
Gas fireplaces fail for reasons that range from a dirty pilot assembly to a faulty thermocouple or a blocked vent. We diagnose the ignition and venting components, check that the gas connection and burner are sound, and confirm the unit is venting correctly before we call a repair finished. If the problem is minor, we’ll tell you it’s minor.
Wood Burning Fireplace Repair
Wood-burning fireplaces develop problems over time: cracked firebox brick, deteriorated mortar joints, a smoke chamber that no longer pulls correctly, or a damper that won’t seal. We assess the firebox and smoke chamber for damage, check the damper operation, and look at how the flue is drafting. Then we explain the repair path in plain terms, including whether resurfacing makes sense.
Fireplace Insert Service
Inserts sit inside an existing firebox and vent through a liner, and their performance depends on that liner being correctly sized and connected. We service inserts for fit, seal, and venting, checking that the connection to the flue is sound and that the surrounding firebox isn’t compromised. If an insert was installed without a proper liner, we’ll show you what we find.
Damper Repair
A damper that sticks open lets heat escape up the chimney all winter; one that sticks closed sends smoke into the room. We repair and adjust throat dampers and top-sealing dampers, replacing worn hardware where needed. A damper that seals properly is one of the simplest efficiency wins in the whole system.
Firebox Repair
The firebox takes the direct heat, so its brick and mortar are usually the first to show wear. We repair cracked or spalled firebox brick and rebuild deteriorated joints using refractory mortar suited to the heat. Left alone, a failing firebox can let heat reach the structure behind it, which is why we treat firebox damage as a priority repair.
Pilot Light Repair
A gas fireplace pilot that won’t stay lit usually points to a thermocouple, thermopile, or dirty orifice rather than a gas supply problem. We test the pilot assembly, clean or replace components as needed, and verify the burner lights and holds. This is a repair that’s easy to misdiagnose, so we test rather than guess.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade chimney supply brands because the materials matter as much as the labor. For liner retrofits and insert connections, we fit DuraFlex flexible liner systems, which allow a correct install in older or non-standard flue configurations where a rigid liner simply won’t fit. For firebox and smoke chamber resurfacing, HeatShield gives us a structurally sound repair path that avoids the cost of full liner replacement in the right cases. Olympic Chimney components and Famco caps round out the hardware we install when a repair calls for them.
Knowing a brand means knowing where it wears. DuraFlex liners hold up well but depend on correct sizing and connection at both ends, which is where we see most problems. HeatShield resurfacing performs when the underlying flue is sound enough to carry it, so we evaluate that before recommending it. Famco caps are built to withstand weather at the crown and protect the flue opening, and we install them to manufacturer spec. Whether you have Olympia Chimney equipment or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some symptoms are cosmetic. Others mean stop using the fireplace until it’s checked. Here’s how to tell the difference.
- Smoke rolling into the room. Smoke coming back into the room usually means a drafting problem, a blocked flue, or a damper that won’t open fully. Don’t keep burning and hope it settles; have it looked at.
- Cracked or crumbling firebox brick. Cracks in the firebox can let heat reach the structure behind it. This is a repair to schedule promptly, not a cosmetic issue to defer.
- A damper that won’t move or won’t seal. A stuck damper is either a draft problem or an efficiency drain. Both are fixable, and neither gets better with use.
- Gas smell or a pilot that won’t stay lit. Any gas odor is a reason to stop using the appliance and call for service. A pilot that keeps going out is usually a component failure, and it’s worth diagnosing properly.
- Rust, water stains, or debris in the firebox. These point to a cap or crown issue letting water in from above. Water damage progresses, so catching it early saves the firebox and the flue.
Our Fireplace Repair Process – Step by Step
- 1
We inspect before we recommend. Every repair visit starts with a look at the full system: firebox, damper, smoke chamber, flue, and cap. We use a camera to see inside the flue and document what we find, so you’re working from evidence, not a sales pitch.
- 2
We show you what we find. You see the photos and the camera footage. If the firebox damage is minor and can wait, we say so. If a repair is safety-critical, we explain exactly why.
- 3
We give you a flat-price written estimate. The estimate is agreed before any work is booked. No surprise numbers after the fact, and no upsell to services the system doesn’t need.
- 4
We do the repair to spec. Whether it’s a damper rebuild, a firebox repair, or a DuraFlex liner retrofit inside an insert, the work is done with professional-grade materials matched to the job. Copperfield specialty tools are part of how we sweep and inspect, because the right tooling prevents avoidable damage.
- 5
We verify and document the repair. Before we leave, we test the system: draft, damper seal, pilot operation, cap fit. You get the record of the work and the condition of the system, which is useful whether you’re staying put or selling.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Flatbush?
Fireplace repair in Flatbush typically runs from about $150 for a straightforward damper adjustment to $2,500 or more for a firebox rebuild or liner work, and most common repairs land in the $250 – $900 range. The written estimate always sets the final price, and the estimate itself is free.
- Damper repair: $150 – $400, depending on whether hardware is replaced.
- Pilot light or thermocouple repair: $120 – $350, depending on the component.
- Firebox repair or repointing: $400 – $1,800, depending on how much brick and mortar is involved.
- Insert service and connection: $250 – $900, depending on liner condition.
- Liner resurfacing with HeatShield: typically less than full replacement, and we’ll tell you honestly when replacement is the only sound option.
What drives the price is access, the extent of damage, and the materials the system requires. Overpaying usually happens when a contractor recommends a full liner replacement without showing you the evidence. We don’t do that. Every recommendation comes with camera footage and photos you can review yourself, and we’ll tell you plainly when a repair can safely wait. The free estimate includes the inspection findings and the line-item scope, so you can compare without pressure.
Fireplace Repair Near Flatbush – Our Service Area
We work across Flatbush and the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands, Crown Heights, Midwood, Borough Park, Prospect Heights, Park Slope, Brownsville, Marine Park, and Mill Basin. Response time depends on the day’s route, but early calls often get same-day visits. If you’re outside Flatbush, we can still help. Book your fireplace repair or an East Flatbush visit online or by phone, and we’ll confirm a window. For homeowners who want the full chimney looked after as well, see our Chimney Sweep Flatbush page.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Flatbush
Fireplace repair covers any fix to the firebox, damper, smoke chamber, flue connection, insert, or gas ignition components that keeps the fireplace from operating safely or correctly. It’s different from a chimney sweep, which cleans the flue, though the two often go together. If the system isn’t drafting, sealing, or lighting properly, that’s repair work. Call (866) 937-7157 for an exact quote, and the estimate is free.
Most common repairs take one visit of a few hours, though a firebox rebuild or liner job may need a second appointment. Damper repairs and pilot light fixes are usually done in one visit. The scope of work in the written estimate tells you what to expect before we book. Call (866) 937-7157 to discuss timing.
Fireplace repair in Flatbush typically runs $150 – $400 for a damper repair, $120 – $350 for pilot light work, and $400 – $1,800 for firebox repairs, with the written estimate setting the final price. The estimate is free and itemized. Call (866) 937-7157 for an exact quote.
Yes. We service Olympia Chimney equipment and other common makes, along with DuraFlex, HeatShield, Famco, Gelco, and Copperfield materials. If you’re unsure what you have, we can identify it during the inspection. Call (866) 937-7157 for an exact quote, free of charge.
Same-day service is often possible when you call early, and we answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We don’t work Saturday. Call (866) 937-7157 for an exact quote.
We stand behind our work, and the written estimate documents exactly what’s covered. Ask us during the estimate and we’ll spell out the terms. A repair done to manufacturer spec with professional-grade materials is built to hold. Call (866) 937-7157 for an exact quote.
Clear the hearth of furniture, tools, and anything within a few feet of the firebox, and don’t burn in the fireplace for at least 24 hours before the visit. Note any symptoms you’ve noticed, like smoke coming back or a pilot that won’t stay lit. Have any insert manuals handy if you have them. Call (866) 937-7157 with questions.
Schedule Your Fireplace Repair Service in Flatbush Today
If your fireplace isn’t drafting, sealing, or lighting the way it should, a documented inspection is the right first step. We inspect before we recommend, show you the camera evidence, and give you a written estimate before any work is booked. Call (866) 937-7157. We answer 24/7, with fast dispatch 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Chimney Sweep Flatbush.