Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Flatbush?
Chimney liner and rebuild work in Flatbush typically runs $1,800 to $6,500, with a full stainless liner installation for a standard one-story home landing around $2,400 to $3,800 and a partial masonry rebuild above the roofline running $3,500 to $6,500. HeatShield resurfacing, which restores a damaged flue from the inside without tearing out the chimney, usually comes in at $1,200 to $2,600. Every price we give is an estimate – the written estimate after inspection sets the final number.
Those ranges hold across Flatbush because the housing stock here creates predictable repair patterns. The neighborhood’s brick rowhouses and detached frame homes near Beverley Road, Newkirk Plaza and Church Avenue were built with clay tile flues sized for coal or early wood stoves, not the appliances homeowners run today. When a liner has spalled tiles, cracked joints or no liner at all, the fix is either a new flexible liner or a resurfaced flue. That decision, more than anything else, drives the price.
We inspect before we recommend. A chimneysweep who quotes a liner over the phone without seeing the flue is guessing, and the guess tends to be expensive.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here is how the line items break out for Flatbush homeowners. These are typical ranges for residential wood-burning and solid-fuel systems, not promises – every chimney has its own geometry.
| Work | Typical Estimated Range |
|---|---|
| Level 2 inspection (camera in the flue) | $200 – $450 |
| Standard chimney sweep | $150 – $280 |
| HeatShield flue resurfacing | $1,200 – $2,600 |
| DuraFlex stainless flexible liner, single-story | $2,400 – $3,800 |
| Insulated liner upgrade for an exterior chimney | add $400 – $900 |
| Liner for a two or three-story rowhouse run | $3,200 – $5,200 |
| Rebuild of the crown | $500 – $1,100 |
| Partial masonry rebuild above the roofline | $3,500 – $6,500 |
| Full chase rebuild with new cap (Famco or Gelco) | $6,000 – $11,000 |
| New stainless cap installed | $250 – $600 |
| Firebox repointing or repair | $600 – $1,800 |
What pushes a job toward the top of these ranges: a flue with offset tiles that blocks a straight liner drop, a chimney on an exterior wall that needs insulation to hold flue temperature, and any roofline masonry work where the brick has spalled below the crown. What pulls it down: a sound original clay liner that only needs resurfacing with HeatShield rather than a full new liner, and easy roof access from a flat or low-pitch section. We use DuraFlex flexible liner systems specifically because older Flatbush chimneys often have non-standard or slightly crooked runs where a rigid liner physically won’t fit. That flexibility avoids tearing into the masonry, which is where a liner job gets genuinely expensive.
What Affects Chimney Liner & Rebuild Pricing in Flatbush
- Roofline access and building height. A great many Flatbush homes are two or three-story rowhouses where the chimney sits well above the roof deck. A taller run means more liner material, more scaffold time and more labor per foot. A single-story detached home on a side street costs less to line than a three-story brick rowhouse off Flatbush Avenue.
- Liner shape and condition. A sound round or square clay flue can take a flexible liner straight down. Cracked, spalled or missing tiles need addressing first – either by resurfacing with HeatShield or by a corrective approach before the new liner goes in. We don’t skip that step, because a liner installed over a failing flue only hides the problem.
- Exterior versus interior chimneys. Chimneys built into an interior wall hold heat well. Chimneys on an exterior wall – common on the detached homes west of Flatbush Avenue – run cold, which causes creosote buildup and drafting problems. Insulating the liner costs more but is often the right call for those chimneys.
- Masonry condition above the roof. Flatbush’s freeze-and-thaw winters are hard on brick. Water gets into a cracked crown, freezes, and pops the face off the brick. When that has happened, a liner alone won’t fix the chimney; you need masonry work too, and that’s where rebuild pricing climbs.
- Cap and crown work bundled in. A rebuild almost always means a new crown and cap. We fit Famco and Gelco caps, which are built to manufacturer spec for weatherproofing. We don’t call a cap optional when the top of the chimney is open to rain.
- Appliance type. A wood-burning fireplace, a wood stove insert and a solid-fuel boiler each need a correctly sized flue and often different liner ratings. Matching the liner to the appliance is part of the estimate, not an afterthought.
How to Save on Chimney Liner & Rebuild
The biggest single savings in this trade comes from not overbuying the repair. That’s why we push the standalone inspection first. A documented, honest assessment tells you whether your flue needs a full liner replacement, a HeatShield resurfacing job, or just a sweep and a new cap. Homeowners who skip that step and accept a phone quote for a full rebuild sometimes pay thousands for work they didn’t need. A formal inspection is offered as a standalone service with no obligation to bundle anything, so you can take the report and decide.
Beyond that:
- Get the flue camera-inspected before you commit to a liner. It tells you which flue the appliance actually uses and whether the tiles are sound.
- Resurface before you replace where the flue is structurally intact. HeatShield resurfacing is a real alternative to a full liner swap when the flue is stable but the inner surface is rough or cracked.
- Catch crown and cap problems early. A cracked crown is a $500 to $1,100 fix. Left alone through a few Flatbush winters, it becomes the masonry rebuild.
- Ask what grade and rating the liner is. A stainless liner sized correctly for your appliance lasts, and paying once for the right material beats paying twice. We source from DuraFlex, Olympia Chimney, HeatShield, Gelco, Famco and Copperfield – the same professional-grade brands commercial contractors work with.
- Bundle the sweep and inspection when you’re having a liner assessed anyway. The inspection is cheaper when the chimney is already being opened up.
Every estimate we give is free and written. Call (866) 937-7157 for a no-obligation assessment of your liner or rebuild. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to most Flatbush addresses the same day.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Flatbush?
A standard stainless liner for a single-story Flatbush home typically runs $2,400 to $3,800, and a two or three-story rowhouse run usually lands $3,200 to $5,200. The difference is height, liner length and whether the flue needs any corrective work first. Call (866) 937-7157 for an exact quote – estimates are free.
Is it cheaper to reline or rebuild a chimney?
Relining is almost always cheaper: a liner job runs $2,400 to $5,200 where a roofline masonry rebuild runs $3,500 to $6,500, and a full chase rebuild climbs higher still. Rebuild is only necessary when the brick itself is failing, not when the flue is the only problem. An inspection tells you which situation you’re in. Call (866) 937-7157 to book one.
Can HeatShield resurfacing save me money over a full liner replacement?
Yes, when the flue is structurally sound. HeatShield resurfacing in Flatbush typically runs $1,200 to $2,600, against $2,400 to $3,800 for a new flexible liner on a single-story home. It restores the inner surface rather than installing a new pipe, so it avoids the material and labor cost of a full liner. We only recommend it when the flue can support it, not as a shortcut. Call (866) 937-7157 to find out if your chimney qualifies.
How much does a chimney crown rebuild or masonry repair cost in Flatbush?
A crown rebuild runs $500 to $1,100, partial masonry above the roofline runs $3,500 to $6,500, and a full chase rebuild with a new cap runs $6,000 to $11,000. Flatbush’s freeze-thaw cycles mean a cracked crown gets worse every winter it’s left, so repairing it early is the cheaper path. Call (866) 937-7157 for a written estimate.
Can you come today to assess my liner or rebuild?
Often yes – fast dispatch from 7am to 7pm, Sunday through Friday, means a same-day inspection is usually possible in Flatbush. We answer 24/7, so a call placed outside dispatch hours is booked into the next opening. Call (866) 937-7157.
If you’re weighing a liner against a rebuild, the flue camera settles it. We inspect the whole system – firebox, smoke chamber, flue, crown and cap – and give you a documented report before any work is quoted. Our technicians have up to 9 years of experience with DurFlex and HeatShield systems, and we handle the full chimney from top to bottom: sweeping, cap and crown, repair, fireplace repair and inspection. For the broader repair and restoration picture, see our chimney liner & rebuild page, and for scheduling a visit start at Chimney Sweep Flatbush.
Call (866) 937-7157 for a free, written estimate on your liner or rebuild. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Pricing reflects the Flatbush market as of 2026. Chimney Sweep Flatbush offers free estimates – call (866) 937-7157.
Written by the team at Chimney Sweep Flatbush.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniel Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kevin Nguyen