Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Midwood?
Chimney cleaning in Midwood typically costs $150 to $300 for a standard sweep of a single flue, and most Midwood homes land near the lower end of that range because the housing stock here favors straightforward one-flue brick chimneys over complex multi-flue setups. A basic sweep with a Level 1 inspection usually runs $180 to $250. Add a cap, crown repair, or a liner issue and you’re looking at $400 to $1,200 or more depending on what the technician finds. The written estimate you get after an inspection sets the final price, and we don’t charge to come out and look first.
Midwood is a neighborhood where wood-burning fireplaces still get real use, especially in the older brick and stucco homes between Ocean Avenue and Nostrand, and along the side streets off Avenue J and Avenue M. That matters for pricing. A chimney that’s been burning hardwood every winter needs a different level of attention than one that’s decorative. Our technicians have up to 9 years of experience, and they’ll tell you plainly which category your chimney falls into before any work starts. Call (866) 937-7157 for a free estimate. We answer 24/7.
Chimney Cleaning Cost Breakdown (2026)
Here’s how chimney cleaning pricing breaks down for the Midwood market. These are typical estimates, not exact quotes – the written estimate from your inspection sets the final number.
| Service | Typical Range |
|---|---|
| Standard chimney sweep (single flue) | $150 – $300 |
| Sweep with Level 1 inspection | $180 – $320 |
| Level 2 camera inspection (standalone) | $250 – $450 |
| Chimney cap installation | $175 – $450 |
| Crown repair or rebuild | $400 – $1,500 |
| HeatShield liner resurfacing | $1,200 – $2,800 |
| DuraFlex flexible liner installation | $2,500 – $6,000 |
| Firebox repair | $500 – $2,000 |
| Creosote removal (heavy buildup) | $300 – $600 |
What pushes a Midwood chimney job up? Heavy creosote is the big one. A chimney that’s seen years of softwood burning – or a house that sat empty for a while with a neglected flue – can take twice as long to clean. Access matters too. Midwood has plenty of homes with chimneys set back from the roofline behind parapets or shared-party-wall construction, and getting a proper brush and vacuum setup in place takes more time than a simple open chimney. And if the inspection turns up a cracked crown or a failing liner, that’s a separate repair priced on its own.
What keeps the cost down? A chimney that’s swept regularly doesn’t accumulate the kind of creosote that requires special handling. A standard annual sweep on a well-maintained fireplace is the cheapest visit you’ll ever have.
What Affects Chimney Cleaning Pricing in Midwood
- Number of flues. A single flue is the baseline. Midwood homes with a fireplace plus a separate boiler or furnace flue often need both cleaned, which adds $80 to $150 to the job.
- Creosote level. Light, sooty buildup cleans out fast. Glazed, tar-like creosote (the stage that’s genuinely dangerous) takes chemical treatment and more labor, pushing a sweep toward $400 to $600.
- Roof access and chimney position. Low-pitch roofs and chimneys that rise clearly above the roofline are quick to work on. Tall chimneys, steep pitches, or setups where the technician has to work around a parapet add time and cost.
- Whether an inspection is included. A sweep alone is cheaper than a sweep with a documented Level 1 or Level 2 inspection. We recommend pairing them – the inspection is what tells you whether the chimney is safe to use, not just clean.
- Cap and crown condition. A missing or damaged cap lets water and animals into the flue. Repairing that during a sweep is far cheaper than dealing with the liner damage a leaking crown causes over time.
- Liner condition. If the inspection shows a cracked or deteriorated clay liner, the cost jumps. This is where HeatShield resurfacing can save real money compared to a full liner replacement.
One local factor worth knowing: Midwood’s mix of older brick construction and stucco-clad homes means chimney exteriors here take a beating from freeze-thaw cycles each winter. A crown that looked fine in October can spall by March. We inspect before we recommend anything, and if the crown’s holding up we’ll tell you so. No upsell.
How to Save on Chimney Cleaning
The biggest savings come from catching problems early and keeping the appointment routine. A few practical approaches:
- Book the sweep before the heating season starts. Fall is when chimney work backs up. Scheduling in late summer or early spring keeps the job a straightforward sweep instead of an urgent call.
- Burn seasoned hardwood. Dry, well-seasoned wood produces far less creosote than green or soft wood. Less creosote means a faster, cheaper sweep and a safer flue.
- Get the inspection documented. A standalone inspection from a company that offers it without requiring you to book repairs gives you a written record of the chimney’s condition. That record helps you compare quotes honestly and avoids paying twice.
- Fix the cap before it becomes a liner problem. A $175 to $450 cap installation from Famco or Gelco, fitted to manufacturer spec, prevents the water intrusion that leads to a $2,500 liner replacement later.
- Ask about HeatShield before agreeing to a full liner. When the liner is deteriorating but structurally sound enough, HeatShield resurfacing restores the flue at a fraction of the cost of pulling it and installing a new liner. We fit DuraFlex flexible liner systems when a full replacement is genuinely needed – and we’ll explain which path your chimney actually requires.
- Take the free estimate. The estimate costs nothing and the written price is what you pay. Call (866) 937-7157 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
For homeowners who want the full picture of how we handle chimney work across the area, our chimney sweep in Flatbush page covers the service side in detail.
Why Chimney Cleaning Prices Vary So Much in Midwood
Two companies can quote wildly different prices for the same Midwood chimney, and it’s rarely about one being cheaper. It’s usually about scope. A sweep-and-go outfit quotes a low number for a brush-out and leaves. A company that owns the full system – sweeping, cap and crown, chimney repair, fireplace repair, and formal inspection – prices the visit to include a condition check, because the sweep is the moment when you’re most likely to catch a cracked crown or a spalling firebox before it becomes an expensive repair.
We work with six professional-grade chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the materials commercial contractors use, not the generic fittings sold at a hardware store. When we install a Gelco or Famco cap, it’s fitted to the manufacturer’s spec, so the fit is right and the weatherproofing is real. When we sweep, the Copperfield specialty tools come out because a proper flue brush and vacuum setup is the difference between a clean flue and a dusty living room.
If your chimney is older or non-standard – a narrower flue, an offset, a shape that doesn’t fit a rigid liner – DuraFlex flexible liners are how we handle retrofits and repairs where a rigid system physically won’t go. That’s not a sales pitch. It’s the reason some Midwood chimneys can be repaired rather than rebuilt.
Safety first: what we won’t do
Chimney work involves height, confined spaces, and creosote that can ignite without warning. We won’t walk you through a do-it-yourself sweep on a roof, and we won’t tell you a flue is safe to use based on a glance from the ground. Creosote in its glazed stage is a genuine fire hazard, and the only way to know what’s in your flue is to look properly. If we inspect and find heavy buildup or a damaged liner, we’ll say so clearly and explain the options before anyone touches your chimney. That’s a safety matter, not a sales matter.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in Midwood in 2026?
A standard chimney sweep in Midwood typically costs $150 to $300 for a single flue, with a sweep and Level 1 inspection usually landing between $180 and $320. Heavy creosote or a multi-flue chimney pushes that higher. Call (866) 937-7157 for an exact quote – estimates are free.
Is it cheaper to clean a chimney or replace the liner?
Cleaning is almost always cheaper – $150 to $300 versus $2,500 to $6,000 for a full DuraFlex liner replacement. But if the inspection shows a cracked or deteriorated liner, cleaning won’t make the flue safe to use. HeatShield resurfacing, at roughly $1,200 to $2,800, sits between the two and often lets a homeowner repair rather than replace. Call (866) 937-7157 and we’ll inspect first, then tell you which option applies.
How often does a chimney need cleaning in Midwood?
Most wood-burning fireplaces in Midwood should be swept once a year, ideally before the heating season. A chimney used heavily through the winter, or one burning unseasoned wood, may need attention sooner. The only reliable way to know is an inspection – call (866) 937-7157 to book one.
Can you clean my chimney the same day I call?
Often, yes. Same-day service is frequently available depending on the schedule, and a standard sweep takes about an hour. Call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney inspection cost extra if you’re already sweeping?
It can, but it’s money well spent. A standalone Level 2 camera inspection runs $250 to $450, and pairing it with a sweep is usually cheaper than booking them separately. We offer inspection as a no-commitment standalone service, so you get a documented assessment before deciding on any repair. Call (866) 937-7157 for a free estimate.
What to Do Next
If your Midwood chimney hasn’t been looked at in a while, the smartest first step is an inspection. It’s cheap relative to the alternative, it gives you a written picture of the system’s condition, and it lets you make a repair decision based on facts rather than a contractor’s urgency. Whether the answer is a simple sweep, a cap and crown repair, HeatShield resurfacing, or a DuraFlex liner replacement, one company can handle the whole system from firebox to cap – and you’ll know the price before any work starts.
Call Chimney Sweep Flatbush at (866) 937-7157 for a free estimate on chimney cleaning in Midwood. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Pricing reflects the Midwood market as of 2026. Chimney Sweep Flatbush offers free estimates – call (866) 937-7157.
Written by the team at Chimney Sweep Flatbush.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Gallagher"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniel Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kevin Nguyen