Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Flatbush
If your gas fireplace won’t stay lit, your damper is stuck, or smoke rolls into the room instead of up the flue, call (866) 937-7157. We work on residential fireplaces and solid-fuel appliances across Flatbush, from the Victorian rowhouses near Prospect Park to the two- and three-story brick blocks off Church Avenue. We know how these chimneys are built here, and that matters. A fireplace in an 1890s Flatbush rowhouse is a different animal from one in a newer house, and a repair that ignores the original flue is money thrown away. Estimates are free, and we’ll tell you plainly when a repair can safely wait. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Flatbush Homeowners Call Chimney Sweep Flatbush for Fireplace Repair
Flatbush’s chimney stock is old, and most of it was never designed for the way the houses are used now. That’s the whole reason we lead with inspection. Before we recommend a liner, a firebox rebuild, or a damper replacement, we run a camera through the flue and show you the footage. You see what we see. If the picture’s clean, we’ll say so.
That inspection-first approach is why property managers and rowhouse owners keep calling us. We’re dealing with century-old masonry, shared stacks, and furnaces venting into flues that were sized for something else entirely. None of that gets fixed by guessing, and none of it gets sold by fear. When we recommend work, we recommend it because the camera found a problem, not because it’s a slow week.
On response time: we dispatch technicians to Flatbush every day except Saturday, and we book same-day appointments when the schedule allows. Our technicians have up to 9 years of experience with fireplace and chimney systems. We work the whole system, firebox to cap, so a repair recommendation here accounts for the flue above it, not just the part that’s broken.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Flatbush
Most of what goes wrong with a fireplace here traces back to three things: the firebox itself, the damper, and the flue behind both. Here’s how we handle each repair in Flatbush homes, and what the work usually looks like.
Gas Fireplace Repair
Gas fireplaces in Flatbush show up mostly in the basement-conversion units and the newer renovations inside older rowhouses. When a gas log set won’t stay lit or lights with a lazy, orange flame instead of a crisp blue one, the pilot assembly, the thermocouple, or the venting is usually the culprit. We check the appliance and the flue together, because a gas unit venting into an undersized flue won’t draft properly no matter how clean the burner is.
Wood Burning Fireplace Repair
A wood-burning fireplace that smokes into the room is the most common call we get in Flatbush, and it’s rarely the wood’s fault. It’s usually a damper that won’t open all the way, a firebox wall that’s cracked and pulling air the wrong direction, or a clay-tile flue that’s spalled from decades of freeze-thaw. We camera the flue, check the smoke chamber, and tell you what’s actually failing before we touch anything.
Fireplace Insert Service
Inserts are often dropped into older Flatbush fireplaces without a proper liner connection, which lets heat and creosote leak around the insert and into the smoke chamber. We check the connection, the surround seal, and the flue sizing. If a liner doesn’t fit the existing flue, we fit a DuraFlex flexible liner system, which installs correctly in the older, non-standard configurations that rigid liners physically won’t.
Damper Repair
A damper that sticks open wastes heat all winter, and one that sticks closed turns your fireplace into a smoke machine. In a 1900s Flatbush rowhouse, the original cast-iron damper is often warped or rusted past the point of repair, and we’ll tell you honestly whether it can be freed, rebuilt, or needs replacing. We check the damper frame and the smoke shelf while we’re in there, since a warped frame is a common partner to a stuck blade.
Trusted Brands We Service in Flatbush
The materials matter as much as the diagnosis. We source and install from professional chimney supply brands, including DuraFlex for flexible liner retrofits, Olympia Chimney for liner and venting components, Famco for cap and chimney components, and Copperfield for specialty tools and materials used in sweep and inspection work. These are the same components commercial contractors use, not hardware-store substitutes. We don’t stock parts on a truck, so we order what your fireplace actually needs and book the install once it’s on site. That’s how a repair stays a repair instead of turning into a return visit.
Common Fireplace Repair Problems We See in Flatbush Homes
- Cracked clay-tile flues. The freeze-thaw cycles here crack and spall the original clay tile, which lets creosote and moisture into the brick behind it. Once that happens, the liner needs resurfacing or replacement, not just a sweep.
- Backdrafting from a shared stack. On Victorian Flatbush blocks, the chimney is shared between adjacent rowhouses, so a flue problem in one house can quietly backdraft into the neighbor’s venting. Where we find a party-wall stack, we check both flues, not just the one we were called about.
- Undersized flues for basement units. Basements converted to separate units often vent their own gas boiler or water heater into a flue that was never sized for it. That causes poor draft and third-degree creosote buildup a brush can’t touch, which is why we camera the flue before calling it clean.
- Warped dampers and cracked firebox brick. Decades of hot-and-cold cycling in these 1890s-1920s fireplaces warp the damper blade and crack the firebox brick. Both pull air the wrong way and send smoke back into the room.
Why Party-Wall Chimneys Make Flatbush Repairs Different
This is where Flatbush fireplace repair parts company with generic chimney advice. On many blocks in Victorian Flatbush, the chimney stack runs up the party wall between two rowhouses, so a repair on one side of the wall can change how the other side vents. We can’t see the neighbor’s flue from your firebox, and a camera running down your flue won’t tell us what’s happening on the other side of the brick.
So when we find a shared stack, we check both flues before signing off on the job. A firebox repair that looks complete on one side can leave the neighbor’s heating appliance drafting worse than before, and that’s the kind of thing that comes back to bite everyone involved. The same goes for the freeze-thaw damage that cracks crowns and spalls the exterior brick on these old stacks: water that gets into one side of a shared chimney doesn’t stop at the party wall.
All of which is why we don’t quote a repair from the doorway. A qualified technician typically runs a Level 2 inspection with a camera, shows the homeowner the footage of the flue liner and smoke chamber, and recommends a HeatShield resurfacing, a stainless liner, a damper replacement, or firebox repointing based on what’s actually there. Never work without visible evidence. That’s the rule we hold ourselves to in Flatbush, where the worst upselling in this trade happens on exactly these century-old chimneys.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Flatbush, NY
A typical damper repair in Flatbush runs $150 to $400, firebox repointing runs $400 to $1,200, and a HeatShield liner resurfacing runs $1,800 to $3,200. A full stainless liner replacement runs higher, and we’ll only recommend it if the camera shows a flue that resurfacing can’t save. The written estimate sets the final price, and there’s no surprise line item added after the work starts.
| Repair | Typical Flatbush Range |
|---|---|
| Damper repair or replacement | $150 – $400 |
| Firebox brick repointing | $400 – $1,200 |
| Gas fireplace pilot or thermocouple repair | $175 – $450 |
| HeatShield liner resurfacing | $1,800 – $3,200 |
| Stainless liner replacement | $3,000 – $6,500 |
What moves the number: how much of the flue the camera finds damaged, whether the firebox is cracked in one spot or several, and whether the job is a tight party-wall stack or an exterior chimney with easy access. We bring the camera, we show you the footage, and the estimate is free. If the repair can wait until you’ve saved for it, we’ll tell you that too.
We Also Serve Cities Near Flatbush
We serve Flatbush and the neighborhoods around it, including Kensington, East Flatbush, Flatlands, and Crown Heights. If you’re just over the line in one of those areas, call and we’ll book you the same way. Same inspection-first approach, same camera evidence before any recommendation.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Flatbush
It’s usually the fireplace itself, most often a failed thermocouple or pilot assembly, but the flue can be the cause if the unit drafts poorly. We check the appliance and the flue together to separate the two. Call (866) 937-7157 for an exact quote. Estimates are free.
Yes. On a shared party-wall chimney, a repair on one side can change how the other side vents, so both flues need checking before the job is signed off. That’s standard practice on Victorian Flatbush rowhouse blocks, and skipping it leaves a real risk behind the wall. Call us to book a standalone inspection with camera footage you can review.
Ask to see the camera footage of the flue and smoke chamber. If a contractor recommends a liner or a firebox rebuild without showing you the evidence, don’t sign. We show the footage before we recommend anything, and we say plainly when a repair can safely wait. Call (866) 937-7157 for an exact quote. Estimates are free.
A stuck or warped damper, a cracked firebox wall, or a clay-tile flue that’s spalled from years of freeze-thaw is the usual cause in a Flatbush rowhouse. Each one pulls air the wrong direction. We camera the flue and check the smoke chamber before recommending anything. Call (866) 937-7157 for an exact quote. Estimates are free.
Often, yes. If the firebox brick is cracked but the surrounding masonry is sound, repointing or a HeatShield resurfacing of the firebox can restore it without tearing out the fireplace. The camera tells us which it is. Call (866) 937-7157 for an exact quote. Estimates are free.
Book Your Fireplace Repair in Flatbush
If your fireplace, damper, or firebox needs attention, call (866) 937-7157 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. We’ll run the camera, show you what we find, and recommend only the repair the evidence supports. One company for the full chimney system, from firebox to cap. See our fireplace repair team for the full scope of what we handle.
Written by the team at Chimney Sweep Flatbush.