Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Midwood
If you own or manage a wood-burning or solid-fuel chimney in Midwood, you already know the housing here isn’t simple. The brick semi-detached houses and small apartment buildings that line blocks off Ocean Parkway and Ocean Avenue weren’t built with modern venting in mind, and the work has to match the building. That’s the job we do. We inspect before we recommend, we map every flue to its address, and we don’t sell repairs you can’t see evidence for. Our technicians have up to 9 years of experience, and we bring professional-grade materials from brands like DuraFlex and Olympia Chimney to every job. Call (866) 937-7157 to book a sweep or a standalone inspection.
Why Midwood Homeowners Call Chimney Sweep Flatbush for Chimney Sweep
Midwood isn’t a market where a quick brush-and-go outfit lasts. Homeowners here are careful with property and ask hard questions about who’s doing what, especially when a chimney stack belongs to two attached homes at once. Our answer is a documented inspection and a flat price agreed before we start, so you know what you’re paying for and why.
The technicians we connect you with are state-licensed and insured as their state requires, and the local pros we send understand the difference between a 1930s exterior masonry stack and a newer build. That matters on the Ocean Parkway service roads, where rooflines are tight and one side of a chimney may not be the same household as the other. When we sweep in Midwood, we’re working on buildings we’ve seen the shape of before.
Our technicians have up to 9 years of experience, which is the number that matters for lining and inspection work rather than how long a company sign has hung. If you want a straight answer on what your chimney needs, call (866) 937-7157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Midwood
Chimney work in Midwood means more than fireplaces. Coal-era stacks here were converted to gas boilers and water heaters decades ago, and that shift is why our inspections and sweeps lean so heavily on what the flue is actually venting.
Level 2 Inspection
A Level 2 inspection in Midwood is the workhorse. It’s what you want when you’re buying or selling a two-family brick house, after a boiler swap, or the first time you call us about a leak. We run a camera through the flue, photograph what we find, and give you the report whether or not you hire us for repairs. This is where shared party-wall stacks get mapped – flue to address, one side to the other.

Annual Sweep
An annual sweep is the baseline for anyone using a fireplace or solid-fuel appliance in Midwood. For gas-fired boilers and water heaters venting into a clay-tile flue, we still check the flue, because unlined or deteriorated liners from the converted coal era are common here. The sweep itself is straightforward; the value is the inspection that comes with it.

Creosote Removal
Creosote builds up on the inside of a flue in layers that don’t look alike. Glazed, tar-like third-degree creosote can’t be brushed off – it’s a fire risk and usually calls for a relining decision, which is where DuraFlex flexible liners come in for retrofits and non-standard stacks. First-degree soot and light creosote come off in a normal sweep. We tell you which one you’re looking at in the report, with the picture to match.

Soot Removal
Soot removal goes hand in hand with the sweep, especially on fireboxes and smoke chambers that haven’t been opened in years. On Midwood’s brick buildings, soot can also travel: a party-wall chimney with a cracked tile on one side will pull soot into the neighboring flue. We check both sides when we see a shared stack, and we knock next door before starting.
Trusted Brands We Service in Midwood
Materials matter, and we work with six professional-grade chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We don’t stock parts locally or keep inventory in Midwood – the right component is ordered for your chimney and your flue dimensions, which means a slightly longer lead time but a correct fit the first time. When we fit DuraFlex flexible liner systems, it’s because a rigid liner physically won’t go into some of Midwood’s older or irregular stacks. HeatShield resurfacing is the other option we bring up often, because it can renew a liner that isn’t a total loss instead of replacing it.
Common Chimney Sweep Problems We See in Midwood Homes
- Shared party-wall stacks. On attached brick houses, one masonry stack often serves two households. A missing cap or cracked tile on one side can leak water or vent creosote into the neighbor’s unit, so we map each flue to its address before any liner or cap work begins.
- Coal-era clay tile serving a gas boiler. Plenty of Midwood flues were built for coal, then converted to gas or oil, and never relined. That leaves an oversized, deteriorating flue for a modern appliance, which is exactly what a Level 2 inspection catches before water or soot crosses the property line.
- Spalled crowns and missing caps. Freeze-thaw cycles through winter and humid summers wear on exterior masonry crowns. When a crown cracks and the flue is uncapped, nor’easter rain and summer downpours track down the liner – and the leak shows up inside the house, well away from the chimney.
- Interior leaks that look like plumbing. A brown stain on a ceiling near a party wall is often blamed on the roof or a pipe. On a shared flue, it’s frequently the neighbor’s uncapped chimney, which is why we check both sides of the wall before recommending a fix.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Midwood, NY
Pricing for chimney work in Midwood is set per job by a written estimate, and the estimate is free. Typical ranges to plan around:
| Service | Typical Range in Midwood |
|---|---|
| Annual sweep (fireplace) | $180 – $320 |
| Level 1 inspection | $150 – $250 |
| Level 2 inspection (with camera) | $250 – $450 |
| Creosote removal (heavier deposits) | $250 – $600 |
| Soot removal (firebox and smoke chamber) | $150 – $350 |
| Chimney cap installed (Famco or Gelco) | $200 – $400 |
| HeatShield liner resurfacing | $1,200 – $2,800 |
What moves the number: how many flues your stack carries, whether access requires coordinating with a neighbor across a party wall, and whether the liner is intact or needs resurfacing. A shared stack adds time but not upsell. These are estimates, the written estimate sets the final price, and we don’t recommend work that can safely wait.
We Also Serve Cities Near Midwood
If you’re just outside Midwood’s blocks, we cover the neighboring areas too, including Flatlands, Kensington, Flatbush, and Borough Park. The housing stock and chimney problems are close relatives from block to block. Same inspection-first approach, same written estimate before anything starts, wherever the chimney stands. If you’re near the Midwood line and not sure whether you’re covered, call and we’ll tell you.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Midwood
We inspect the flue or flues serving your address, and when a shared party-wall stack is involved, we map each flue to its property before work begins. On attached brick houses, the flue you think is yours may serve the neighbor’s boiler, so the mapping step happens first, not last. We also knock next door to coordinate access before starting. Call (866) 937-7157 for an exact quote – estimates are free.
Yes, you still need the flue checked, especially in Midwood where many gas boilers vent into coal-era clay-tile flues that were never relined. A gas boiler doesn’t produce creosote the way wood does, but it does produce condensation and can pull flue gases back into the house if the liner is cracked or the cap is missing. A Level 2 inspection tells you what you’re actually venting into. Call (866) 937-7157 to book one.
The leak is usually coming down the chimney, not through the roof. A cracked crown or a missing cap lets wind-driven rain into an uncapped flue, and the water tracks down the clay-tile liner until it finds a gap inside the house. On shared stacks in Midwood, that gap may be on the neighbor’s side. Call (866) 937-7157 for an inspection – estimates are free.
Third-degree creosote is glazed, hardened, tar-like buildup on the flue wall, and no, a brush won’t remove it. It’s a fire risk, and the usual fix is relining – HeatShield resurfacing when the liner is salvageable, or a DuraFlex flexible liner for a full replacement. We say which when we see it, with photos. Call (866) 937-7157 to schedule an inspection.
Yes, and it happens often on party-wall stacks. When two households share one masonry stack, a cracked tile on one side lets water and soot vent into the neighboring flue, and the damage shows up in the neighbor’s unit. That’s why coordination across the property line comes first on these jobs. Call (866) 937-7157 for an inspection that covers both sides of the wall.
Contact Us for a Free Estimate in Midwood
If your chimney is on a shared stack, hasn’t been looked at since the boiler was swapped, or you just want a straight answer on what shape it’s in, call us. We inspect before we recommend, we document what we find, and we tell you plainly when work can wait. Call (866) 937-7157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about our full chimney sweep work and the areas we cover in Midwood.
Written by the team at Chimney Sweep Flatbush.