Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Park Slope
If you own a brownstone or townhouse in Park Slope and the chimney is leaking, leaning, or shedding brick, you’re dealing with a stack that was built for coal in the 1880s and has spent more than a century taking weather it was never designed for. We handle the full chimney system, from the firebox to the cap, and we inspect before we recommend anything. Our technicians have up to 9 years of experience, and we fit DuraFlex flexible liner systems and restore liners with HeatShield resurfacing when replacement isn’t necessary. Call (866) 937-7157 for a free estimate. We answer 24/7.
Why Park Slope Homeowners Call Chimney Sweep Flatbush for Chimney Repair
Park Slope is a neighborhood of four-story brownstones and limestone townhouses built between the 1880s and 1910s, and the chimneys on those blocks are old enough that a routine sweep often turns into a structural conversation. We understand that, and we don’t use it as a sales lever. Nothing gets recommended until you’ve seen the camera footage yourself.
That’s the standard we hold on every job in Park Slope. A Level 2 inspection documents the deteriorated mortar joints, cracked flue tile, and failed flashing, and you review the evidence before you agree to any repair. Our inspections are available as a standalone service, so you can get the assessment with no obligation to bundle the work.
We also know how these buildings sit next to each other. On streets like Carroll and 8th Ave, a chimney often shares a party wall with the neighbor’s, which means the fix usually involves two owners. We’re used to that coordination.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Park Slope
We cover the full system across the five core services we offer: sweeping, cap and crown, chimney repair, fireplace repair, and inspection. On Park Slope masonry, the work below is what comes up most often.
Mortar Repointing
Decades of nor’easters and humid summers work on the soft old brick of Park Slope brownstones until the mortar joints erode and wash away. Repointing means grinding out the failed mortar and packing in fresh material that matches the original. Left alone, loose joints lead to loose bricks, and a chimney that leans or leaks at the roofline.

Spalling Brick Repair
Spalling is the flaking and popping of the brick face itself, usually from freeze-thaw cycles pulling moisture through soft brick. On Park Slope buildings, it shows up most where the brick meets the roof, since that’s where wind and water hit hardest. We replace the damaged units with matching brick and address the moisture source, not just the surface.

Chimney Waterproofing
A breathable waterproofing treatment keeps rain out while letting the masonry dry from the inside. For Park Slope’s older chimneys, this is one of the highest-value steps you can take, because wet brick through a cold winter is what drives spalling and crumbling mortar in the first place. We don’t seal masonry that’s holding trapped moisture, so we check drain paths first.

Flashing Repair
Flashing is the metal at the base of the chimney that ties it into the roof and stops water at the joint. After enough seasons, it pulls away, and water tracks down shared stacks into adjacent units. It’s one of the most common causes of ceiling stains in Park Slope, and one of the easiest problems to miss until a neighbor reports the leak.
Trusted Brands We Service in Park Slope
Materials matter on a chimney this old. We source and install from six professional chimney supply brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the same materials commercial contractors use, not generic hardware-store substitutes. DuraFlex flexible liner systems let us fit a correct liner into the older, non-standard flue configurations common in Park Slope brownstones, where a rigid liner physically won’t go. Famco and Gelco caps and Copperfield specialty tools show up across our sweep and inspection work. Because we work with these suppliers directly, we keep turnaround reasonable when a job needs specific parts.
Common Chimney Repair Problems We See in Park Slope Homes
- Mortar joints eroding. Winter storms and summer humidity combine to break down the mortar in brick this old, and once it’s gone, the bricks loosen and the chimney can lean or leak where it meets the roof.
- Original clay-tile flues cracking. Most Park Slope flues were sized for coal, not wood or gas. Tile that cracks or separates causes draft problems and lets creosote build up in places a brush can’t reach.
- Flashing pulling away. Metal flashing separates from the roof or party wall over time, letting water track down a shared stack and into a neighboring unit before anyone notices a problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Park Slope, NY
Here are typical ranges for the work we do most in Park Slope. Local brick, roof access, and how much of the stack is shared all affect where a job lands.
| Service | Typical Range in Park Slope |
|---|---|
| Mortar repointing | $600 – $1,800 |
| Spalling brick repair | $500 – $1,500 |
| Chimney waterproofing | $400 – $900 |
| Flashing repair | $350 – $850 |
| Full chimney rebuilding | $4,000 – $9,000 |
These are estimates, not quotes. The written estimate sets the final price, and we don’t add a service-call fee. Before any of this is recommended, you’ll see the camera evidence that justifies it. If a repair can safely wait a season, we’ll tell you that too.
Why Park Slope Chimneys Need More Than a Standard Sweep
Here’s the part that matters most in this neighborhood. Park Slope’s brownstones were built between the 1880s and 1910s with brick chimneys designed for coal, not wood or gas. That legacy shows up on every job: undersized flues, no modern liner, and decades of corrosive coal soot embedded in the masonry. A standard sweep-and-inspect on a Park Slope chimney is a structural evaluation every time, and that’s exactly where the industry’s worst upselling happens, with liners and masonry sold on fear rather than evidence. We don’t work that way. We shoot camera footage of the flue, show you the deteriorated joints or cracked tile, and let you decide with your own eyes.
The shared stacks add another layer. Many Park Slope chimneys sit in a party wall, so a crack or smoke smell that shows up in one unit is often a neighbor’s flue issue. Fixing it means coordinating access and code across two owners, and we handle that part of the job as a matter of course.
When a cold season of heavy fireplace use ends, the first warm spring weekend brings a wave of calls from brownstone owners who smell creosote in a parlor-floor fireplace they haven’t touched in months. That smell usually means creosote deposits in a flue that’s been gathering them all winter.
We Also Serve Cities Near Park Slope
Our chimney repair work covers Park Slope and the surrounding neighborhoods, including Prospect Heights, Clinton Hill, Williamsburg, and Crown Heights. The brownstone stock and shared stacks are much the same across those blocks, so the approach carries over. If you’re on the fence between a sweeping visit and a repair, start with our chimney repair team and we’ll sort out which your chimney actually needs.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Park Slope
White staining is efflorescence, and it means moisture is moving through the brick and leaving mineral deposits behind. It signals water is getting into the masonry, usually through failing mortar, a cracked crown, or pulling flashing, so it’s worth a look. Call (866) 937-7157 for an inspection before it turns into spalling.
That smell is creosote deposits in the flue reacting to warmer, more humid air, and it’s common in Park Slope after a heavy October-to-April burning season. A sweep usually clears it. If the smell returns, the flue itself may need a closer look. Call (866) 937-7157 to book a sweep and inspection.
Not automatically. A flue with sound clay tile and no cracks can stay unlined for occasional wood burning, but a camera inspection is the only way to know the tile’s condition. We show you the footage before recommending anything, and HeatShield resurfacing is often a middle path before full replacement. Call (866) 937-7157 for an honest read.
Yes. Repointing needs are visible from the exterior and from the roofline, where you’ll see recessed or crumbling joints and loose bricks. A Level 2 inspection with a camera also catches what’s happening inside the flue. Call (866) 937-7157 and we’ll document it all.
Responsibility usually follows the property line and the party-wall agreement, so the owner of the flue that’s failing generally covers that repair while shared masonry is split or negotiated. We inspect both sides, report what we find, and coordinate access across the two owners. Call (866) 937-7157 to get the assessment started.
Call (866) 937-7157 for a free estimate on chimney repair in Park Slope. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We inspect before we recommend, show you the camera evidence, and write the price on the estimate before any work begins.
Written by the team at Chimney Sweep Flatbush.