Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Kensington
If your chimney is showing mortar crumbs on the hearth or a stain spreading across the chimney breast, the repair usually isn’t dramatic – but in Kensington it’s rarely a one-house story. Most of Kensington’s housing is pre-war attached and semi-attached brick rowhouses, and the chimney stack on your roof is often shared with the home next door. We know these blocks well, from the tight side streets off Church Avenue to the low-rise apartment buildings along McDonald Avenue, and we plan repair work around the roof access and neighbor coordination that attached housing demands. Call (866) 937-7157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kensington Homeowners Call Chimney Sweep Flatbush for Chimney Repair
Chimney work in Kensington has a particular rhythm, and we’ve built our repair approach around it. In dense attached housing, a chimney problem on one side of a party wall can affect the flue on the other, so our technicians document what they find on the shared stack before recommending anything. That documentation habit is why property managers and rowhouse owners across Kensington call us back.
We inspect before we recommend. A standalone inspection gives you a written, photographed record of the liner, crown, flashing and mortar joints – no obligation to book repair work, no bundling pressure. If the honest answer is that a repair can safely wait until spring, we say so.
Our technicians have up to 9 years of experience working on the clay-tile liners and masonry stacks common in Kensington’s 1920s to 1940s rowhouses. We fit DuraFlex flexible liner systems where rigid liners physically won’t go, and we use HeatShield resurfacing when the existing flue is structurally sound enough to restore rather than replace. One company for the full chimney system, from firebox and smoke chamber to cap and crown.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Kensington
Kensington’s masonry takes a beating. A humid continental climate with freezing winters and wet springs means repeated freeze-thaw cycles work on every mortar joint on the block. Here’s how we handle the repairs we see most often. Our chimney repair team covers the full range of structural work.
Mortar Repointing in Kensington
When mortar joints between the bricks start receding, the brickwork is left exposed to water and frost. We rake out the failed mortar to a proper depth and repoint with fresh mortar matched to the existing joint profile. On Kensington’s tightly packed attached homes, repointing often has to be sequenced around the neighbor’s roofline and coordinated so scaffolding or ladder placement doesn’t block an adjoining property.

Spalling Brick Repair in Kensington
Spalling is when the face of a brick flakes off, usually after water gets in and freezes behind it. On Kensington’s pre-war rowhouses, we commonly find spalling on the upper courses and around the crown, where the freeze-thaw cycle hits hardest. We replace damaged bricks with matched units and address the water source, because replacing brick without fixing the moisture problem just buys time.

Chimney Waterproofing in Kensington
A breathable waterproof coating on the masonry slows water absorption without trapping moisture inside, which matters on these older brick stacks. In Kensington’s attached housing, we waterproof the full stack on your side and note the condition of the shared section so both owners have a clear picture. Waterproofing is usually the least expensive way to extend the life of a chimney that’s structurally sound but taking on water.

Flashing Repair in Kensington
Flashing is the metal where the chimney meets the roof, and it’s the most common source of the water stains we see inside Kensington homes. Failed flashing lets water run down the chimney breast and into ceilings. We repair or replace the flashing and seal the roof-to-chimney junction properly, and we inspect the neighbor’s side where the flashing runs along a shared party wall.
Chimney Rebuilding and Tuckpointing in Kensington
When a stack is too far gone – loose bricks, a failed crown, deteriorating from the top down – rebuilding the section above the roofline restores it properly rather than patching indefinitely. Tuckpointing follows where joints need repointing without full reconstruction. Both are common on Kensington’s older stacks, and both require documenting the shared condition before work starts.
Trusted Brands We Service in Kensington
We work with materials from professional chimney supply brands, not hardware-store substitutes. For flexible liner retrofits and repairs we fit DuraFlex, which lets us install a correctly sized liner in older, non-standard flues where rigid systems won’t pass. For resurfacing we use HeatShield, which restores a sound but deteriorated flue without the cost of full replacement. For caps and weatherproofing we install Gelco and Olympia Chimney products to manufacturer specification. We don’t claim to stock parts locally – we source the right materials for your specific flue and schedule the work once they’re in hand.
Common Chimney Repair Problems We See in Kensington Homes
- Cracked clay flue tiles on shared party-wall stacks. In attached rowhouses, a crack in one side’s flue tile can let smoke and carbon monoxide migrate into the adjacent home’s flue. This is a serious safety issue that a camera inspection will surface.
- Spalled brick and crumbling crowns from freeze-thaw. The crown is the concrete cap on top of the stack, and it’s the first line of defense against water. Repeated freezing and thawing on Kensington’s exposed rooflines breaks it down, sending debris into both flues and weakening the whole stack.
- Undersized liners for modern gas appliances. Many of Kensington’s flues were sized for coal or oil and are poorly matched to today’s gas appliances, which causes poor draft and excess creosote buildup. Left long enough, that creosote can turn into a hard glaze that’s difficult to remove.
- Failed flashing along shared party walls. Where flashing runs along a shared wall between attached homes, a failure on one side can channel water into the neighbor’s structure. It’s a repair that has to account for both properties.
See the difference
Before
After
Before
After
Before
AfterThe Shared-Chimney Factor in Kensington Rowhouses
This is the part of the job that makes Kensington different from a detached suburban market. In row after row of attached homes, a chimney is rarely truly individual. A cracked flue tile or a failed crown on one home’s stack can leak into or affect the abutting neighbor’s side, and our technicians routinely have to document the shared condition and coordinate with the adjoining owner before recommending repair work. That means photos, a written record of what’s on each side, and a plain explanation of which problems belong to which property. When repair work could affect a neighbor’s flue, we flag it clearly so both owners understand the stakes before anyone commits to a scope.
A typical job tends to unfold like this: a homeowner in a 1920s attached rowhouse notices mortar crumbs on the hearth and a faint musty smell near the chimney breast. A Level 2 inspection often reveals spalling brick and a deteriorated chimney crown on the shared stack, with the neighbor’s flue affected by the same breach. A qualified technician documents the shared condition, coordinates access with both owners, and repairs the crown, repoints the mortar, and may reline the flue with a HeatShield or DuraFlex liner to restore draft and prevent cross-contamination. Because these flues were originally built for coal-era fireplaces, the liners are frequently the wrong size for what’s venting through them now.
Pricing for Chimney Repair in Kensington, NY
We quote per job, and the written estimate sets the final price. In Kensington’s market, a typical mortar repointing on a chimney stack runs $450 to $1,200, depending on how much of the joint needs rebuilding. Spalling brick repair usually runs $300 to $900. Chimney waterproofing is typically $250 to $600. Flashing repair runs $200 to $500. Tuckpointing a full stack often lands between $600 and $1,500, and a partial chimney rebuild above the roofline typically runs $1,800 to $5,000 depending on the extent. These are estimates, and the free written estimate you get after inspection is what sets the actual price. Call (866) 937-7157 to book one.
We Also Serve Cities Near Kensington
Our Kensington work extends across the surrounding Brooklyn neighborhoods, so homeowners and property managers nearby get the same inspection-first approach and the same care with shared and adjacent flues. We also serve Flatbush, Borough Park, Midwood and Sunset Park, where the housing stock and chimney issues are closely related.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Kensington
Responsibility usually follows the property line, but the shared stack itself often falls to whoever owns the portion being repaired, and in Kensington’s attached rowhouses it’s common for both owners to share in repairs to a truly common structure. We document the condition on both sides so each owner knows exactly what’s affected and can sort out responsibility with clear information. Call (866) 937-7157 to schedule an inspection that records the shared condition.
A camera inspection is the reliable way to confirm cross-venting, because a cracked flue tile or a failed separation in a shared party-wall chimney can let gases pass from one side to the other. Signs at home include a musty or smoky smell near the chimney breast and draft problems that don’t match your own appliance. We inspect the flue with a camera and show you the footage, so you see exactly what’s happening. Call (866) 937-7157 for an exact quote – estimates are free.
A Level 2 inspection reviews the accessible portions of the chimney, including the flue interior via camera, the crown, flashing and mortar joints, and it’s the right inspection for attached rowhouses where shared flues are a factor. It produces a documented, photographed record of the system’s condition with no obligation to book repair work. We use Copperfield specialty tools and materials to access and reach the parts of the stack that matter in these tight rowhouse configurations. Call (866) 937-7157 to book a standalone inspection.
The crown crumbles because of the freeze-thaw cycle – water gets into the concrete or mortar crown, freezes, and breaks it apart, then repeats through Kensington’s cold winters and wet springs. A crown that’s deteriorating lets water into the top of the stack and the flues below, which accelerates brick and joint damage. Rebuilding the crown properly with good materials stops the cycle. Call (866) 937-7157 and we’ll show you the condition before recommending anything.
Yes, and this is the single most important thing to understand about chimney repair in attached Kensington housing. Cracked flue tiles or a failed crown on one side of a shared stack can leak water, smoke and carbon monoxide into the abutting neighbor’s flue, and freeze-thaw debris from one side can fall into both flues. That’s why we document the shared condition and coordinate with the adjoining owner before recommending repairs – it prevents a fix on one side from leaving the neighbor exposed. Call (866) 937-7157 to schedule an inspection of both sides.
Written by the team at Chimney Sweep Flatbush.